datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

P/N + Description + Content Search

Search Word's :
Description : ECONOLINE - DC/DC-Converter RF Series, 1.25 Watt, DIP8 (Single & Dual Output)

Features

● Industry Standard Pinout

● 1kVDC & 2kVDC Isolation

● No Heatsink Required

● No Extern. Components Required

● Custom Solutions Available

● UL94V-0 Package Material


Description : REMOTE CONTROL ENCODER

DESCRIPTION

The SC5262 is a remote control encoder paired with SC5272 utilizing CMOS technology. It encodes data and address pins into a serial coded waveform suitable for RF or IR modulation. SC5262 has a maximum of 12-bits of tri-state address pins providing up to 531,441(or 312 ) address codes; thereby, drastically reducing any code collision and unauthorized code scanning possibilities.



FEATURES

* Low power consumption and very high noise immunity

* Up to 12 tri-state code address pins or 6 data pins

* Wide operating voltage range(Vcc=3V ~ 15V)

* Single resistor oscillator

* Latch or Momentary output type



APPLICATION

* Home/automation security system

* Remote control toys or for industrial use

* Remote control fan

* Garage door controller


Part Name(s) : RF-3080-AT001
Harris Semiconductor
Harris Semiconductor
Description : ANTENNA, PORTABLE UHF SATCOM ANTENNA (240-400 MHZ)

ANTENNA, PORTABLE UHF SATCOM ANTENNA (240-400 MHZ)

The Harris RF-3080-AT001 antenna provides maximum UHF SATCOM performance from a 6.3 lb package. Its crossed Yagi antenna design in a partially assembled package allows rapid deployment and directional high gain radiation pattern. The frequency range of this antenna is 240 to 400 MHz. The entire antenna is stored in an 18.5 x 6 x 6 inch package making it easy to transport.

Features
■ Lightweight
■ High Gain
■ Easy to assemble
■ Easy to direct radiation pattern towards different satellites
■ Circular polarization

Description : VOLTAGE REGULATOR FOR MIDDLE OUTPUT CURRENT

OUTLINE

The R×5RE Series are voltage regulator ICs with high output voltage accuracy and ultra-low quiescent

current by CMOS process. Each of these ICs consists of a voltage reference unit, an error amplifier, a driver

transistor, and resistors for setting output voltage, and a current limit circuit. 



FEATURES

• Ultra-low Quiescent Current ...........................TYP. 1.1µA (R×5RE30A,VIN=5.0V)

• Ultra-low Dropout Voltage ...............................TYP. 0.5V (R×5RE50A,IOUT=60mA)

• Large Output Current ......................................TYP. 120mA (R×5RE50A)

• Low Temperature-Drift Coefficient of Output Voltage...........................TYP. ±100ppm/˚C

• Broad Operating Voltage Range ......................MAX.  10.0V

• Excellent Line Regulation................................TYP. 0.1%/V

• High Accuracy Output Voltage ........................±2.5%

• Output Voltage................................................... tepwise setting with a step of 0.1V in the range of 2.0V to 6.0V is

                                                        possible (refer to Selection Guide)

• Two Types of Packages.................................. O-92, SOT-89 (Mini-power Mold)



APPLICATIONS

• Power source for battery-powered equipment.

• Power source for cameras, video instruments such as camcorders, VCRs, and hand- held communication equipment.

• Precision voltage references.


Description : 16Mx16 Mobile SDRAM 54CSP

4M x 16Bit x 4 Banks Mobile SDRAM in 54CSP



GENERAL DESCRIPTION

The K4S56163LC is 268,435,456 bits synchronous high data rate Dynamic RAM organized as 4 x 4,196,304 words by 16 bits, fabricated with SAMSUNG's high performance CMOS technology. Syn

chronous design allows precise cycle control with the use of system clock and I/O transactions are possible on every clock cycle. Range of operating frequencies, programmable burst length and programmable latencies allow the same device to be useful for a variety of high bandwidth, high performance memory system applications.



FEATURES

• 2.5V power supply.

• LVCMOS compatible with multiplexed address.

• Four banks operation.

• MRS cycle with address key programs.

-. CAS latency (1 & 2 & 3).

-. Burst length (1, 2, 4, 8 & Full page).

-. Burst type (Sequential & Interleave).

• EMRS cycle with address key programs.

• All inputs are sampled at the positive going edge of the system clock.

• Burst read single-bit write operation.

• Special Function Support.

-. PASR (Partial Array Self Refresh).

-. TCSR (Temperature Compensated Self Refresh).

• DQM for masking.

• Auto refresh.

• 64ms refresh period (8K cycle).

• Commercial Temperature Operation (-25 ° C ~ 70 °C).

• 54balls CSP (-RXXX - Pb, -BXXX - Pb Free).



 


Description : Remote Control Encoder

Description

PT2262 is a remote control encoder paired with PT2272 utilizing CMOS Technology. It encodes data and address pins into a serial coded waveform suitable for RF or IR modulation. PT2262 has a maximum of 12 bits of tri-state address pins providing up to 531,441 (or  312 ) address codes; thereby, drastically reducing any code collision and unauthorized code scanning possibilities.



 


Description : VOLTAGE DETECTOR R×5VL SERIES

OUTLINE

The R× 5VL Series are voltage detector ICs with high detector threshold accuracy and ultra-low supply current by CMOS process. Each of these ICs consists of a voltage reference unit, a comparator, resistors for voltage detection, an output driver and a hysteresis circuit. The detector threshold is fixed with high accuracy. Two output Types, Nch open drain type and CMOS type, are available. Three types of packages, TO-92, SOT-89 (Mini-power Mold), SOT-23-5 (Mini-mold), are available.



FEATURES

• Ultra-low Supply Current................................TYP. 1.0µA (VDD=3.0V)

• Broad Operating Voltage Range......................1.5V to 10.0V

• Detector Threshold...........................................Stepwise setting with a step of 0.1V in the range of

                                                      2.0V to 6.0V is possible (refer to Selection Guide).

• High Accuracy Detector Threshold .................±2.5%

• Low Temperature-Drift Coefficient of Detector Threshold .....TYP.±100ppm/˚C

• Two Output Types............................................Nch Open Drain and CMOS

• Three Types of Packages..................................TO-92, SOT-89 (Mini-power Mold), SOT-23-5 (Mini-mold)



APPLICATIONS

• CPU & Logic Circuit Reset

• Battery Checker

• Window Comparator

• Wave Shaping Circuit

• Battery Back-Up Circuit

• Power Failure Detector



 


Description : LOW VOLTAGE DETECTOR

OUTLINE
The R×5VT Series are voltage detector ICs with high detector threshold accuracy and ultra-low supply current by CMOS process, which can be operated at an extremely low voltage and is used, for instance, for system reset. Each of these ICs consists of a voltage reference unit, a comparator, resistors for voltage detection, an output driver and a hysteresis circuit. The detector threshold is fixed with high accuracy.
The R× 5VT Series are operable by a lower voltage than that for the R× 5VL Series, and can be driven by a sin gle battery.
Two output types, Nch open drain type and CMOS type, are available. Three types of packages, TO-92, SOT-89 (Mini-power Mold), SOT-23-5 (Mini-mold), are available.

FEATURES
• Ultra-low Supply Current ............................TYP. 0.8µA (VDD=1.5V)
• Broad Operating Voltage Range.................. 0.7V to 10.0V (Topt =25˚C)
• Detector Threshold........................................Stepwise setting with a step of 0.1V
                                                                         in the range of 0.9V to 6.0V
                                                                         is possible (refer to Selection Guide).
• High Accuracy Detector Threshold..............±2.5%
• Low Temperature-Drift Coefficien of Detector Threshold..............TYP. ±100ppm/˚C
• Two Output Types.........................................Nch Open Drain and CMOS
• Three Types of Packages ..............................TO-92, SOT-89 (Mini-power Mold),
                                                                          SOT-23-5 (Mini-mold)

APPLICATIONS
• CPU & Logic Circuit Reset
• Battery Checker
• Window Comparator
• Wave Shaping Circuit
• Battery Back-Up Circuit
• Power Failure Detector

Description : Ferrite Chip Bead

General Specification:
    (a) Operating Temp. : -40°C to +125°C
    (b) Storage Temp. : -40°C to +125°C
    (c) Temperature Rise: 20°C Max. at Rated Current
    (d) Humidity Range: 85 ± 2% RH
    (e) Storage Condition (Component in its packaging)
        i) Temperature: Less than 40%
        ii) Humidity : 60% RH

Description : VOLTAGE REGULATOR

OUTLINE
The R×5RL Series are voltage regulator ICs with high accuracy output voltage and ultra-low quiescent current by CMOS process. Each of these ICs consists of a voltage reference unit, an error amplifier, a driver transistor, and resistors for setting output voltage.  The output voltage is fixed with high accuracy. Three types of packages, TO-92, SOT-89 (Mini-power Mold), SOT-23-5 (Mini-mold), are available.

FEATURES
• Ultra-low Quiescent Current ...........................TYP. 1.1µA (R×5RL30A, VIN=5.0V)
• Small Dropout Voltage .....................................TYP. 30mV (R×5RL50A, IOUT=1mA)
• Low Temperature-Drift Coefficient of Output Voltage...............TYP. ±100 ppm/˚C
• Excellent Line Regulation.................................TYP. 0.1%/V
• Output Voltage ..................................................Stepwise setting with a step of 0.1V in the range of 2.0V to 6.0V
is possible (refer to Selection Guide).
• High Accuracy Output Voltage.........................±2.5%
• Three Types of Packages...................................TO-92, SOT-89 (Mini-power Mold), SOT-23-5 (Mini-mold)

APPLICATIONS
• Power source for battery-powered equipment.
• Power source for cameras, video instruments such as camcorders, VCRs, and hand- held communication equipment.
• Precision voltage references.

12345678910 Next

All Rights Reserved© datasheetbank.com  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]