datasheetbank_Logo    Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site
Part Name  

P/N + Description + Content Search

Search Words :

Part Name(s) : AD9144 AD9144BCPZ AD9144BCPZRL AD9144BCPAZ AD9144BCPAZRL AD9144-EBZ AD9144-FMC-EBZ AD9144-M6720-EBZ ADI
Analog Devices
Description : QUAD, 16-Bit, 2.8 GSPS, TXDACDIGITAL-TO-ANALOG CONVERTER

GENERAL DESCRIPTION
The AD9144 is a QUAD, 16-bit, high dynamic range DIGITAL-TO-ANALOG CONVERTER (DAC) that provides a maximum sample rate of 2.8 GSPS, permitting a multicarrier generation up to the Nyquist frequency. The DAC outputs are optimized to interface seamlessly with the ADRF6720 analog QUADrature modulator (AQM) from Analog Devices, Inc. An optional 3-wire or 4-wire serial port interface (SPI) provides for programming/readback of many internal parameters. Full-scale output current can be programmed over a typical range of 13.9 mA to 27.0 mA. The AD9144 is available in an 88-lead LFCSP.

FEATURES
   Supports input data rate >1 GSPS
   Proprietary low spurious and distortion design
      6-carrier GSM IMD = 77 dBc at 75 MHz IF
      SFDR = 82 dBc at dc IF, −9 dBFS
      Flexible 8-lane JESD204B interface
      Support QUAD or dual DAC mode at 2.8 GSPS
   Multiple chip synchronization
      Fixed latency
      Data generator latency compensation
   Selectable 1×, 2×, 4×, 8× interpolation filter
      Low power architecture
   Input signal power detection
      Emergency stop for downstream analog circuitry protection
   Transmit enable function allows extra power saving
   High performance, low noise phase-locked loop (PLL) clock
      multiplier
   Digital inverse sinc filter
   Low power: 1.6 W at 1.6 GSPS, 1.7 W at 2.0 GSPS,
      full operating conditions
   88-lead LFCSP with exposed pad

APPLICATIONS
   Wireless communications
      3G/4G W-CDMA base stations
      Wideband repeaters
      Software defined radios
   Wideband communications
      Point-to-point
      Local multipoint distribution service (LMDS) and
         multichannel multipoint distribution service (MMDS)
   Transmit diversity, multiple input/multiple output (MIMO)
   Instrumentation
   Automated test equipment

View
Part Name(s) : AD9154 AD9154BCPZ AD9154BCPZRL AD9154BCPAZ AD9154BCPAZRL AD9154-EBZ AD9154-FMC-EBZ AD9154-M6720-EBZ ADI
Analog Devices
Description : QUAD, 16-Bit, 2.4 GSPS, TXDACDIGITAL-TO-ANALOG CONVERTER

GENERAL DESCRIPTION
The AD9154 is a QUAD, 16-bit, high dynamic range DIGITAL-TO-ANALOG CONVERTER (DAC) that provides a maximum sample rate of 2.4 GSPS, permitting multicarrier generation up to the Nyquist frequency in baseband mode. The AD9154 includes features optimized for direct conversion transmit applications, including complex digital modulation, input signal power detection, and gain, phase, and offset compensation. The DAC outputs are optimized to interface seamlessly with the ADRF6720-27 radio frequency QUADrature modulator (AQM) from Analog Devices, Inc. In mix mode, the AD9154 DAC can reconstruct carriers in the second and third Nyquist zones. A serial port interface (SPI) provides the programming/readback of internal parameters.
The full-scale output current can be programmed over a range of 4 mA to 20 mA. The AD9154 is available in two different 88-lead LFCSP packages.

FEATURES
   Supports input data rates up to 1.096 GSPS
   Proprietary, low spurious and distortion design
      Single carrier LTE 20 MHz bandwidth (BW), ACLR = 77 dBc at
         180 MHz IF
      Six carrier GSM IMD = 78 dBc, 600 kHz carrier spacing at
         180 MHz IF
      SFDR = 72 dBc at 180 MHz IF, −6 dBFS single tone
   Flexible 8-lane JESD204B interface
   Multiple chip synchronization
      Fixed latency
      Data generator latency compensation
   Input signal power detection
   High performance, low noise phase-locked loop (PLL) clock
      multiplier
   Digital inverse sinc filter
   Digital QUADrature modulation using a numerically
      controlled oscillator (NCO)
   Nyquist band selection—mix mode
   Selectable 1×, 2×, 4×, and 8× interpolation filters
   Low power: 2.11 W at 1.6 GSPS, full operating conditions
   88-lead, exposed pad LFCSP

APPLICATIONS
   Wireless communications
      Multicarrier LTE and GSM base stations
      Wideband repeaters
      Software defined radios
   Wideband communications
      Point to point microwave radio
   Transmit diversity, multiple input/multiple output (MIMO)
   Instrumentation
   Automated test equipment

View
Part Name(s) : DAC5681 DAC5681IRGCT DAC5681IRGCR TI
Texas Instruments
Description : 16-BIT, 1.0 GSPS DIGITAL-TO-ANALOG CONVERTER (DAC)

DESCRIPTION
The DAC5681 is a 16-bit 1.0 GSPS DIGITAL-TO-ANALOG CONVERTER (DAC) with wideband LVDS data input and internal voltage reference. The DAC5681 offers superior linearity and noise performance.

FEATURES
• 16-Bit DIGITAL-TO-ANALOG CONVERTER (DAC)
• 1.0 GSPS Update Rate
• 16-Bit Wideband Input LVDS Data Bus
    – 8 Sample Input FIFO
    – On-Chip Delay Lock Loop
• High Performance
    – 73 dBc ACLR WCDMA TM1 at 180 MHz
• On Chip 1.2 V Reference
• Differential Scalable Output: 2 to 20 mA
• Package: 64-Pin 9 × 9 mm QFN

APPLICATIONS
• Cellular Base Stations
• Broadband Wireless Access (BWA)
• WiMAX 802.16
• Fixed Wireless Backhaul
• Cable Modem Termination System (CMTS)
• Medical / Test Instrumentation
• Radar Systems

View
Part Name(s) : DAC3484 DAC3484IRKDR DAC3484IRKDT DAC3484IZAY DAC3484IZAYR DAC3484I Texas-Instruments
Texas Instruments
Description : QUAD-Channel, 16-Bit, 1.25 GSPS DIGITAL-TO-ANALOG CONVERTER (DAC)

Description
The DAC3484 is a very low power, high dynamic range, QUAD-channel, 16-bit DIGITAL-TO-ANALOG CONVERTER (DAC) with a sample rate as high as 1.25 GSPS.

Features
• Very Low Power: 1.27 W at 1.25 GSPS, Full Operating Conditions
• Multi-DAC Synchronization
• Selectable 2x, 4x, 8x, 16x Interpolation Filter
    – Stop-Band Attenuation > 90 dBc
• Flexible On-chip Complex Mixing
    – Two Independent Fine Mixers with 32-Bit NCOs
    – Power Saving Coarse Mixers: ± n×Fs/8
• High Performance, Low Jitter Clock Multiplying PLL
• Digital I and Q Correction
    – Gain, Phase, Offset, and Group Delay Correction
• Digital Inverse Sinc Filter
• Flexible 16-Bit LVDS Input Data Bus
    – 8 Sample Input FIFO
    – Data Pattern Checker
    – Parity Check
    – GC5330 Compatible
• Temperature Sensor
• Differential Scalable Output: 10 mA to 30 mA
• Multiple Package Options: 88-Pin 9x9mm WQFN and 196-Ball 12mmx12mm NFBGA (GREEN / Pb-Free)

Applications
• Cellular Base Stations
• Diversity Transmit
• Wideband Communications

View
Part Name(s) : AD9148 AD9148-EBZ AD9148-M5372-EBZ AD9148-M5375-EBZ AD9148BBCZ AD9148BBCZRL AD9148BBPZ AD9148BBPZRL ADI
Analog Devices
Description : QUAD 16-Bit,1 GSPS, TXDAC+ DIGITAL-TO-ANALOG CONVERTER

GENERAL DESCRIPTION
The AD9148 is a QUAD, 16-bit, high dynamic range, digital-toanalog CONVERTER (DAC) that provides a sample rate of 1000 MSPS. This device includes features optimized for direct conversion transmit applications, including gain, phase, and offset compensation. The DAC outputs are optimized to interface seamlessly with analog QUADrature modulators such as the ADL5371/ADL5372/ADL5373/ADL5374/ADL5375.

FEATURES
Single-carrier W-CDMA ACLR = 80 dBc at 150 MHz IF
Channel-to-channel isolation > 90 dB
Analog output
  Adjustable 8.7 mA to 31.7 mA
  RL = 25 Ω to 50 Ω
Novel 2×, 4×, and 8× interpolator eases data interface
On-chip fine complex NCO allows carrier placement anywhere in DAC bandwidth
High performance, low noise PLL clock multiplier
Multiple chip synchronization interface
Programmable digital inverse sinc filter
Auxiliary DACs allow for offset control
Gain DACs allow for I and Q gain matching
Programmable I and Q phase compensation
Digital gain control
Flexible LVDS digital I/F supports 32- or 16-bit bus width
196-ball CSP_BGA, 12 mm × 12 mm

APPLICATIONS
Wireless infrastructure
   LTE, TD-SCDMA, WiMAX, W-CDMA, CDMA2000, GSM
MIMO/transmit diversity
Digital high or low IF synthesis

View
Part Name(s) : DAC3484 DAC3484IRKD25 DAC3484IRKDR DAC3484IRKDT DAC3484IZAY DAC3484IZAYR DAC3484I TI
Texas Instruments
Description : QUAD-Channel, 16-Bit, 1.25 GSPS DIGITAL-TO-ANALOG CONVERTER (DAC)

Description
The DAC3484 is a very low power, high dynamic range, QUAD-channel, 16-bit DIGITAL-TO-ANALOG CONVERTER (DAC) with a sample rate as high as 1.25 GSPS.

Features
• Very Low Power: 1.27 W at 1.25 GSPS, Full Operating Conditions
• Multi-DAC Synchronization
• Selectable 2x, 4x, 8x, 16x Interpolation Filter
    – Stop-Band Attenuation > 90 dBc
• Flexible On-chip Complex Mixing
    – Two Independent Fine Mixers with 32-Bit NCOs
    – Power Saving Coarse Mixers: ± n×Fs/8
• High Performance, Low Jitter Clock Multiplying PLL
• Digital I and Q Correction
    – Gain, Phase, Offset, and Group Delay Correction
• Digital Inverse Sinc Filter
• Flexible 16-Bit LVDS Input Data Bus
    – 8 Sample Input FIFO
    – Data Pattern Checker
    – Parity Check
    – GC5330 Compatible
• Temperature Sensor
• Differential Scalable Output: 10 mA to 30 mA
• Multiple Package Options: 88-Pin 9x9mm WQFN and 196-Ball 12mmx12mm NFBGA (GREEN / Pb-Free)

Applications
• Cellular Base Stations
• Diversity Transmit
• Wideband Communications

View
Part Name(s) : DAC34SH84 DAC34SH84IZAY DAC34SH84IZAYR XDAC34SH84IZAY TI
Texas Instruments
Description : QUAD-Channel, 16-Bit, 1.5 GSPS DIGITAL-TO-ANALOG CONVERTER (DAC)

DESCRIPTION
The DAC34SH84 is a very low-power, high-dynamic range, QUAD-channel, 16-bit DIGITAL-TO-ANALOG CONVERTER (DAC) with a sample rate as high as 1.5 GSPS.
The device includes features that simplify the design of complex transmit architectures: 2× to 16× digital interpolation filters with over 90 dB of stop-band attenuation simplify the data interface and reconstruction filters. Independent complex mixers allow flexible carrier placement. A high-performance
low-jitter clock multiplier simplifies clocking of the device without significant impact on the dynamic
range. The digital QUADrature modulator correction (QMC) enables complete IQ compensation for gain,
offset and phase between channels in direct upconversion applications.

FEATURES
• Low Power: 1.8 W at 1.5 GSPS, Full Operating Condition
• Multi-DAC Synchronization
• Selectable 2×, 4×, 8×, 16× Interpolation Filter
   – Stop-Band Attenuation > 90 dBc
• Flexible On-Chip Complex Mixing
   – Two Independent Fine Mixers With 32-Bit NCOs
   – Power-Saving Coarse Mixers: ±n × fS / 8
• High-Performance, Low-Jitter Clock-Multiplying PLL
• Digital I and Q Correction
   – Gain, Phase and Offset
• Digital Inverse Sinc Filters
• 32-Bit DDR Flexible LVDS Input Data Bus
   – 8-Sample Input FIFO
   – Supports Data Rates up to 750 MSPS
   – Data Pattern Checker
   – Parity Check
• Temperature Sensor
• Differential Scalable Output: 10 mA to 30 mA
• 196-Ball, 12-mm × 12-mm BGA

APPLICATIONS
• Cellular Base Stations
• Diversity Transmit
• Wideband Communications

View
Part Name(s) : DAC34H84 DAC34H84I DAC34H84IZAY DAC34H84IZAYR PDAC34H84IZAY TI
Texas Instruments
Description : QUAD-Channel, 16-Bit, 1.25 GSPS DIGITAL-TO-ANALOG CONVERTER (DAC)

Description
The DAC34H84 is a very low power, high dynamic range, QUAD-channel, 16-bit DIGITAL-TO-ANALOG CONVERTER (DAC) with a sample rate as high as 1.25 GSPS.
The device includes features that simplify the design of complex transmit architectures: 2x to 16x digital interpolation filters with over 90 dB of stop-band attenuation simplify the data interface and reconstruction filters. Independent complex mixers allow flexible carrier placement.

Features
• Very Low Power: 1.4 W at 1.25 GSPS
• Multi-DAC Synchronization
• Selectable 2x, 4x, 8x, 16x Interpolation Filter
   – Stop-Band Attenuation > 90 dBc
• Flexible On-chip Complex Mixing
   – Two Independent Fine Mixers with 32-bit NCOs
   – Power Saving Coarse Mixers: ± n×Fs/8
• High Performance, Low Jitter Clock Multiplying PLL
• Digital I and Q Correction
   – Gain, Phase, Offset, and Group Delay Correction
• Digital Inverse Sinc Filters
• 32-Bit DDR Flexible LVDS Input Data Bus
   – 8 Sample Input FIFO
   – Supports Data Rates up to 625 MSPS
   – Data Pattern Checker
   – Parity Check
• Temperature Sensor
• Differential Scalable Output: 10mA to 30mA
• 196-Ball, 12x12mm NFBGA (GREEN / Pb-Free)

Applications
• Cellular Base Stations
• Diversity Transmit
• Wideband Communications

View
Part Name(s) : AD9625 AD9625-2.0EBZ AD9625BBPZ-2.0 AD9625BBPZRL-2.0 ADI
Analog Devices
Description : 12-Bit, 2.0 GSPS, 1.3 V/2.5 V Analog-to-Digital CONVERTER

GENERAL DESCRIPTION
The AD9625 is a 12-bit monolithic sampling analog-to-digital CONVERTER (ADC) that operates at conversion rates of up to 2.0 giga samples per second (GSPS). This product is designed for sampling wide bandwidth analog signals up to the second Nyquist zone. The combination of wide input bandwidth, high sampling rate, and excellent linearity of the AD9625 is ideally suited for spectrum analyzers, data acquisition systems, and a wide assortment of military electronics applications, such as radar and jamming/antijamming measures.

FEATURES
12-bit 2.0 GSPS ADC, no missing codes
SFDR = 80 dBc, AIN up to 1 GHz at −1 dBFS, 2.0 GSPS
SFDR = 76 dBc, AIN up to 1.8 GHz at −1 dBFS, 2.0 GSPS
SNR = 59 dBFS, AIN up to 1 GHz at −1 dBFS, 2.0 GSPS
SNR = 58 dBFS, AIN up to 1.8 GHz at −1 dBFS, 2.0 GSPS
Noise floor = −149.5 dBFS/Hz at 2.0 GSPS
Power consumption: 3.5 W at 2.0 GSPS
Differential analog input: 1.1 V p-p
Differential clock input
High speed 6- or 8-lane JESD204B serial output Subclass 1: 5.0 Gbps at 2.0 GSPS
Two independent decimate by 8 or decimate by 16 filters  with 10-bit NCOs
Supply voltages: 1.3 V, 2.5 V
Serial port control
  Flexible digital output modes
  Built-in selectable digital test patterns

View
Part Name(s) : DAC34SH84 DAC34SH84I DAC34SH84IZAY DAC34SH84IZAYR Texas-Instruments
Texas Instruments
Description : QUAD-Channel, 16-Bit, 1.5 GSPS DIGITAL-TO-ANALOG CONVERTER (DAC)

Description
The DAC34SH84 is a very low-power, high-dynamic range, QUAD-channel, 16-bit DIGITAL-TO-ANALOG CONVERTER (DAC) with a sample rate as high as 1.5 GSPS.
The device includes features that simplify the design of complex transmit architectures: 2× to 16× digital interpolation filters with over 90 dB of stop-band attenuation simplify the data interface and reconstruction filters. Independent complex mixers allow flexible carrier placement.
A high-performance low-jitter clock multiplier simplifies clocking of the device without significant impact on the dynamic range. The digital QUADrature modulator correction (QMC) enables complete IQ compensation for gain, offset and phase between channels in direct upconversion applications.
Digital data is input to the device through a 32-bit wide LVDS data bus with on-chip termination. The wide bus allows the processing of high-bandwidth signals. The device includes a FIFO, data pattern checker, and parity test to ease the input interface. The interface also allows full synchronization of multiple devices.
The device is characterized for operation over the entire industrial temperature range of –40°C to 85°C and is available in a 196-ball, 12-mm × 12-mm, 0.8-mm pitch NFBGA package.
The DAC34SH84 low-power, high-bandwidth support, superior crosstalk, high dynamic range, and features are an ideal fit for next-generation communication systems.

Features
• Low Power: 1.8 W at 1.5 GSPS, Full Operating
   Condition
• Multi-DAC Synchronization
• Selectable 2×, 4×, 8×, 16× Interpolation Filter
   – Stop-Band Attenuation > 90 dBc
• Flexible On-Chip Complex Mixing
   – Two Independent Fine Mixers With 32-Bit
      NCOs
   – Power-Saving Coarse Mixers: ±n × fS / 8
• High-Performance, Low-Jitter Clock-Multiplying
   PLL
• Digital I and Q Correction
   – Gain, Phase and Offset
• Digital Inverse Sinc Filters
• 32-Bit DDR Flexible LVDS Input Data Bus
   – 8-Sample Input FIFO
   – Supports Data Rates up to 750 MSPS
   – Data Pattern Checker
   – Parity Check
• Temperature Sensor
• Differential Scalable Output: 10 mA to 30 mA
• 196-Ball, 12-mm × 12-mm NFBGA

Applications
• Cellular Base Stations
• Diversity Transmit
• Wideband Communications

View

1

2345678910 Next

 

All Rights Reserved © datasheetbank.com 2014 - 2019 [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]