DESCRIPTION:
• The HRM series are miniaturized receivers FOR INFRARED REMOTE CONTROL SYSTEMS. PIN diode and preamplifier are assenmbled on lead frame. The demoduolated output signal can be decoded directly by a microprocessor.
FEATURES:
• High Reliability
• Inner shield FOR good anti-interference ability
• Low Power Consumption, only 5V supply voltage
• High Sensitivity, large transmission range
Description
The TSOP11.. – series are miniaturized receivers FOR INFRARED REMOTE CONTROL SYSTEMS. PIN diode and preamplifier are assembled on lead frame, the epoxy package is designed as IR filter.
The demodulated output signal can directly be decoded by a microprocessor. The main benefit is the operation with short burst transmission codes (e.g. RECS 80) and high data rates.
Features
● PHOTO detector and preamplifier in one package
● Internal filter FOR PCM frequency
● Improved shielding against electrical field disturbance
● TTL and CMOS compatibility
● Output active low
● Low power consumption
● High immunity against ambient light
Special Features
● Enhanced data rate of 3500 bit/s
● Operation with short bursts possible (≥6 cycles/burst)
Description
The TSOP15..XG1 – series are miniaturized receivers FOR INFRARED REMOTE CONTROL SYSTEMS. PIN diode and preamplifier are assembled on lead frame, the epoxy package is designed as IR filter. The demodulated output signal can directly be decoded by a microprocessor. The main benefit is the
reliable function even in disturbed ambient and the protection against unCONTROLled output pulses.
Features
PHOTO detector and preamplifier in one package
Internal filter FOR PCM frequency
Improved shielding against electrical field disturbance
TTL and CMOS compatibility
Output active low
Low power consumption
Suitable burst length ≥10 cycles/burst
Description
The TSOP17..SB1 – series are miniaturized receivers FOR INFRARED REMOTE CONTROL SYSTEMS. PIN diode and preamplifier are assembled on lead frame, the epoxy package is designed as IR filter.
The demodulated output signal can directly be decoded by a microprocessor. TSOP17.. is the standard IR REMOTE CONTROL receiver series, supporting all major transmission codes.
Features
PHOTO detector and preamplifier in one package
Internal filter FOR PCM frequency
Improved shielding against electrical field disturbance
TTL and CMOS compatibility
Output active low
Low power consumption
High immunity against ambient light
Continuous data transmission possible (up to 2400 bps)
Suitable burst length ≥10 cycles/burst
Description
The TSOP18..ON1 – series are miniaturized receivers FOR INFRARED REMOTE CONTROL SYSTEMS. PIN diode and preamplifier are assembled on lead frame, the epoxy package is designed as IR filter. The demodulated output signal can directly be decoded by a microprocessor. The main benefit is the reliable function even in disturbed ambient and the protection against unCONTROLled output pulses.
Features
PHOTO detector and preamplifier in one package
Internal filter FOR PCM frequency
TTL and CMOS compatibility
Output active low
Improved shielding against electrical field disturbance
Suitable burst length ≥6 cycles/burst
Special Features
Small size package
Enhanced immunity against all kinds of disturbance light
No occurrence of disturbance pulses at the output
Short settling time after power on (<200s)
Description
The TSOP18..ST1 – series are miniaturized receivers FOR INFRARED REMOTE CONTROL SYSTEMS. PIN diode and preamplifier are assembled on lead frame, the epoxy package is designed as IR filter. The demodulated output signal can directly be de coded by a microprocessor. The main benefit is the reliable function even in disturbed ambient and the protection against unCONTROLled output pulses.
Features
PHOTO detector and preamplifier in one package
Internal filter FOR PCM frequency
TTL and CMOS compatibility
Output active low
Improved shielding against electrical field disturbance
Suitable burst length ≥6 cycles/burst
Special Features
Small size package
Enhanced immunity against all kinds of disturbance light
No occurrence of disturbance pulses at the output
Short settling time after power on (<200s)
Description
The TSOP48..QJ1 – series are miniaturized receivers FOR INFRARED REMOTE CONTROL SYSTEMS. PIN diode and preamplifier are assembled on lead frame, the epoxy package is designed as IR filter.
The demodulated output signal can directly be decoded by a microprocessor. TSOP48..QJ1 is the standard IR REMOTE CONTROL receiver series, supporting all major transmission codes.
Features
● PHOTO detector and preamplifier in one package
● Internal filter FOR PCM frequency
● Improved shielding against electrical field disturbance
● TTL and CMOS compatibility
● Output active low
● Low power consumption
● High immunity against ambient light
● Continuous data transmission possible (800 bit/s)
● Suitable burst length ≥10 cycles/burst
Description
The TSOP48..XG1 – series are miniaturized receivers FOR INFRARED REMOTE CONTROL SYSTEMS. PIN diode and preamplifier are assembled on lead frame, the epoxy package is designed as IR filter.
The demodulated output signal can directly be decoded by a microprocessor. TSOP48..XG1 is the standard IR REMOTE CONTROL receiver series, supporting all major transmission codes.
Features
● PHOTO detector and preamplifier in one package
● Internal filter FOR PCM frequency
● Improved shielding against electrical field disturbance
● TTL and CMOS compatibility
● Output active low
● Low power consumption
● High immunity against ambient light
● Continuous data transmission possible (800 bit/s)
● Suitable burst length ≥10 cycles/burst
Description
The TSOP11..XG1 – series are miniaturized receivers FOR INFRARED REMOTE CONTROL SYSTEMS. PIN diode and preamplifier are assembled on lead frame, the epoxy package is designed as IR filter. The demodulated output signal can directly be decoded by a microprocessor. The main benefit is the
operation with short burst transmission codes (e.g. RECS 80) and high data rates.
Features
PHOTO detector and preamplifier in one package
Internal filter FOR PCM frequency
Improved shielding against electrical field disturbance
TTL and CMOS compatibility
Output active low
Low power consumption
High immunity against ambient light
Description
The TSOP11..CB1 – series are miniaturized receivers FOR INFRARED REMOTE CONTROL SYSTEMS. PIN diode and preamplifier are assembled on lead frame, the epoxy package is designed as IR filter. The demodulated output signal can directly be de coded by a microprocessor. The main benefit is the
operation with short burst transmission codes (e.g. RECS 80) and high data rates.
Features
PHOTO detector and preamplifier in one package
Internal filter FOR PCM frequency
Improved shielding against electrical field disturbance
TTL and CMOS compatibility
Output active low
Low power consumption
High immunity against ambient light
|