datasheetbank_Logo     Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

P/N + Description + Content Search

Search Words :

Part Name(s) : MM54C941 MM54C941J MM54C941N MM74C941 MM74C941J MM74C941N National-Semiconductor
National ->Texas Instruments
Description : OCTAL BUFFERS/LINE Receivers/Line DRIVERS WITH TRI-STATE OUTPUTS View

General Description
These OCTAL buffers and line DRIVERS are monolithic complementary MOS (CMOS) integrated circuits WITH TRI-STATE OUTPUTS. These OUTPUTS have been specially designed to drive highly capacitive loads such as bus-oriented systems. These devices have a fan-out of 6 low power Schottky loads. When VCC e 5V, inputs can accept true TTL high and low logic levels.

Features
■ Wide supply voltage range (3V to 15V)
■ Low power consumption
■ TTL compatibility (Improved on the inputs)
■ High capacitive load
TRI-STATE OUTPUTS
■ Input protection
■ 20-pin dual-in-line package
■ High output drive

 

Part Name(s) : HD74LS241 HD74LS241FPEL HD74LS241P Renesas
Renesas Electronics
Description : OCTAL Buffers / Line DRIVERS / Line Receivers (non inverted three-state OUTPUTS) View

OCTAL Buffers / Line DRIVERS / Line Receivers (non inverted three-state OUTPUTS)

Part Name(s) : 54LS244 DM74LS244 54LS244DMQB 54LS244FMQB 54LS244LMQB DM74LS244WM DM74LS244N National-Semiconductor
National ->Texas Instruments
Description : OCTAL TRI-STATE BUFFERS/LINE DRIVERS/Line Receivers View

General Description
These BUFFERS/LINE DRIVERS are designed to improve both the performance and PC board density of TRI-STATE buffers/DRIVERS employed as memory-address DRIVERS, clock DRIVERS, and bus-oriented transmitters/receivers. Featuring 400 mV of hysteresis at each low current PNP data line input, they provide improved noise rejection and high fanout OUTPUTS and can be used to drive terminated lines down to 133Ω.

Features
TRI-STATE OUTPUTS drive bus lines directly
■ PNP inputs reduce DC loading on bus lines
■ Hysteresis at data inputs improves noise margins
■ Typical IOL (sink current)
   54LS 12 mA
   74LS 24 mA
■ Typical IOH (source current)
   54LS -12 mA
   74LS -15 mA
■ Typical propagation delay times
   Inverting 10.5 ns
   Noninverting 12 ns
■ Typical enable/disable time 18 ns
■ Typical power dissipation (enabled)
   Inverting 130 mW
   Noninverting 135 mW

Part Name(s) : SN74LS241DWRE4 SN74LS241DWE4 TI
Texas Instruments
Description : OCTAL BUFFERS AND LINE DRIVERS WITH 3-STATE OUTPUTS View

description
These OCTAL buffers and line DRIVERS are designed specifically to improve both the performance and density of three-state memory address DRIVERS, clock DRIVERS, and bus-oriented receivers and transmitters.

● 3-State OUTPUTS Drive Bus Lines or Buffer Memory Address Registers
● PNP Inputs Reduce DC Loading
● Hysteresis at Inputs Improves Noise Margins


Part Name(s) : MM54C240 MM54C240J MM54C240N MM54C244 MM54C244J MM54C244J-MIL MM54C244N MM74C240 MM74C240J MM74C240N MM74C244 MM74C244J MM74C244N National-Semiconductor
National ->Texas Instruments
Description : MM54C240/MM74C240 Inverting,MM54C244/MM74C244 Non-Inverting OCTAL Buffers and Line DRIVERS WITH TRI-STATE OUTPUTS View

General Description
These OCTAL buffers and line DRIVERS are monolithic complementary MOS (CMOS) integrated circuits WITH TRI-STATE OUTPUTS. These OUTPUTS have been specially designed to drive highly capacitive loads such as bus-oriented systems. These devices have a fan out of 6 low power Schottky loads. A high logic level on the output disable control input G makes the OUTPUTS go into the high impedance state. For improved TTL input compatibility see MM74C941.

Features
■ Wide supply voltage range (3V to 15V)
■ High noise immunity (0.45 VCC typ)
■ Low power consumption
■ High capacitive load drive capability
TRI-STATE OUTPUTS
■ Input protection
■ TTL compatibility
■ 20-pin dual-in-line package
■ High speed 25 ns (typ.) @ 10V, 50 pF (MM74C244)

Part Name(s) : 74LS240 DM54LS240 DM54LS240E DM54LS240J DM54LS240W DM54LS241 DM54LS241E DM54LS241J DM54LS241W DM74LS240 DM74LS240N DM74LS240WM DM74LS241 DM74LS241N DM74LS241WM LS240 LS241 National-Semiconductor
National ->Texas Instruments
Description : OCTAL TRI-STATE BUFFERS/LINE DRIVERS/Line Receivers View

General Description
These BUFFERS/LINE DRIVERS are designed to improve both the performance and PC board density of TRI-STATE buffers DRIVERS employed as memory-address DRIVERS, clock DRIVERS, and bus-oriented transmitters/receivers. Featuring 400 mV of hysteresis at each low current PNP data line input, they provide improved noise rejection and high fanout OUTPUTS and can be used to drive terminated lines down to 133X.

Features
TRI-STATE OUTPUTS drive bus lines directly
PNP inputs reduce DC loading on bus lines
Hysteresis at data inputs improves noise margins
Typical IOL (sink current)
   54LS 12 mA
   74LS 24 mA
Typical IOH (source current)
   54LS b12 mA
   74LS b15 mA
Typical propagation delay times
   Inverting 10.5 ns
   Noninverting 12 ns
Typical enable/disable time 18 ns
Typical power dissipation (enabled)
   Inverting 130 mW
   Noninverting 135 mW

Part Name(s) : SN74HC540NSRE4 SN74HC540DBRE4 SN74HC540PWE4 SN74HC540PWTE4 TI
Texas Instruments
Description : OCTAL BUFFERS AND LINE DRIVERS WITH 3-STATE OUTPUTS View

description/ordering information
These OCTAL buffers and line DRIVERS feature the performance of the popular ’HC240 series and offer a pinout WITH inputs and OUTPUTS on opposite sides of the package. This arrangement greatly facilitates printed circuit board layout.

● Wide Operating Voltage Range of 2 V to 6 V
● High-Current 3-State OUTPUTS Drive Bus Lines Directly or Up To 15 LSTTL Loads
● Low Power Consumption, 80-µA Max ICC
● Typical tpd = 8 ns
● ±6-mA Output Drive at 5 V
● Low Input Current of 1 µA Max
● Data Flow-Through Pinout (All Inputs on Opposite Side From OUTPUTS)

Part Name(s) : 54FCT244 54FCT244DM 54FCT244FM 54FCT244LM 54FCT244DMQB 54FCT244FMQB 54FCT244LMQB ROCHESTER
Rochester Electronics
Description : OCTAL Buffer/Line Driver WITH TRI-STATE OUTPUTS View

General Description
The ’FCT244 is an OCTAL buffer and line driver WITH TRI-STATE OUTPUTS designed to be employed as a memory and address driver, clock driver, or bus-oriented transmitter/receiver.

Features
■ Non-inverting buffers
■ Output sink capability of 48 mA, source capability of 12 mA
TRI-STATE OUTPUTS drive lines or buffer memory address registers
■ TTL input and output level compatible
■ CMOS power consumption
■ Standard Microcircuit Drawing (SMD) 5962-8763001

Part Name(s) : 84074012A 8407401RA 8407401SA HC240 SN74HC240 SN54HC240 JM38510/65703B2A JM38510/65703BRA SN54HC240J SN74HC240DBR SN74HC240DW SN74HC240DWR SN74HC240N SN74HC240N3 SN74HC240NSR SN74HC240PW SN74HC240PWR SN74HC240PWT SNJ54HC240FK SNJ54HC240J SNJ54HC240W TI
Texas Instruments
Description : OCTAL BUFFERS AND LINE DRIVERS WITH 3-STATE OUTPUTS View

description/ordering information
These OCTAL buffers and line DRIVERS are designed specifically to improve both the performance and density of 3-state memory address DRIVERS, clock DRIVERS, and bus-oriented receivers and transmitters. The ’HC240 devices are organized as two 4-bit buffers/DRIVERS WITH separate output-enable (OE) inputs. When OE is low, the device passes inverted data from the A inputs to the Y OUTPUTS. When OE is high, the OUTPUTS are in the high-impedance state.

● Wide Operating Voltage Range of 2 V to 6 V
● High-Current OUTPUTS Drive Up To 15 LSTTL Loads
● Low Power Consumption, 80-µA Max ICC
● Typical tpd = 9 ns
● ±6-mA Output Drive at 5 V
● Low Input Current of 1 µA Max
● 3-State OUTPUTS Drive Bus Lines or Buffer Memory Address Registers

1

2345678910 Next

All Rights Reserved © datasheetbank.com 2014 - 2019 [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]