datasheetbank_Logo     Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

P/N + Description + Content Search

Search Words :

Part Name(s) : 74FR245 74FR245PCQR 74FR245SCQR National-Semiconductor
National ->Texas Instruments
Description : OCTAL BIDIRECTIONAL TRANSCEIVER WITH TRI-STATE OUTPUTS View

OCTAL BIDIRECTIONAL TRANSCEIVER WITH TRI-STATE OUTPUTS

Part Name(s) : DV74AC245 DV74AC245DW DV74AC245N DV74ACT245 DV74ACT245DW DV74ACT245N AVG
AVG Semiconductors=>HITEK
Description : OCTAL BIDIRECTIONAL TRANSCEIVER WITH 3-State Inputs/OUTPUTS View

OCTAL BIDIRECTIONAL TRANSCEIVER WITH 3-State Inputs/OUTPUTS

Part Name(s) : 54FCT245 54FCT245DMQB 54FCT245FMQB 54FCT245LMQB 54FCT245D 54FCT245F 54FCT245L National-Semiconductor
National ->Texas Instruments
Description : OCTAL BIDIRECTIONAL TRANSCEIVER WITH TRI-STATE OUTPUTS View

General Description
The ’FCT245 contains eight non-inverting BIDIRECTIONAL buffers WITH TRI-STATE OUTPUTS and is intended for bus-oriented applications. Current sinking capability is 48 mA on both the A and B ports. The Transmit/Receive (T/R) input determines the direction of data flow through the BIDIRECTIONAL TRANSCEIVER. Transmit (active HIGH) enables data from A ports to B ports; Receive (active LOW) enables data from B ports to A ports. The Output Enable input, when HIGH, disables both A and B ports by placing them in a High Z condition.

Features
■ TTL input and output level compatible
■ A and B output sink capability of 48 mA, source capability of 12 mA
■ CMOS power consumption
■ Standard Microcircuit Drawing (SMD) 5962-8762901

Part Name(s) : 54ACQ245MDA 54ACTQ245MDA 54ACTQ245W-QMLV 54ACQ245 54ACTQ245 54ACQ245L 54ACQ245D 54ACQ245F 54ACTQ245L 54ACTQ245D 54ACTQ245F National-Semiconductor
National ->Texas Instruments
Description : Quiet Series OCTAL BIDIRECTIONAL TRANSCEIVER WITH TRI-STATE Inputs/OUTPUTS View

General Description
The ’ACQ/’ACTQ245 contains eight non-inverting BIDIRECTIONAL buffers WITH TRI-STATE OUTPUTS and is intended for bus-oriented applications. Current sinking capability is 24 mA at both the A and B ports. The Transmit/Receive (T/R) input determines the direction of data flow through the BIDIRECTIONAL TRANSCEIVER. Transmit (active-HIGH) enables data from A ports to B ports; Receive (active-LOW) enables data from B ports to A ports. The Output Enable input, when HIGH, disables both A and B ports by placing them in a HIGH Z condition.

Features
■ ICC and IOZ reduced by 50%
■ Guaranteed simultaneous switching noise level and dynamic threshold performance
■ Improved latch-up immunity
TRI-STATE OUTPUTS drive bus lines or buffer memory address registers
OUTPUTS source/sink 24 mA
■ Faster prop delays than the standard ’ACT245
■ 4 kV minimum ESD immunity (’ACQ)
■ Standard Military Drawing (SMD)
    — ’ACTQ245: 5962-92187
    — ’ACQ245: 5962-92177


Part Name(s) : MC54F245 MC54F245DW MC54F245J MC74F245 MC74F245DW MC74F245N Motorola
Motorola => Freescale
Description : OCTAL BIDIRECTIONAL TRANSCEIVER WITH 3-STATE INPUTS/OUTPUTS View

OCTAL BIDIRECTIONAL TRANSCEIVER WITH 3-STATE INPUTS/OUTPUTS

TheMC54/74F245 contains eight noninverting BIDIRECTIONAL buffers WITH 3-stateOUTPUTS and is intended for bus-oriented applications. Currentsinking capabilityis 24 mA at the A ports and 64 mAat the B ports. The Transmit/Re
ceive(T/R) input determines the direction ofdata flow through the BIDIRECTIONAL TRANSCEIVER.Transmit (active HIGH)enables data from A ports to B ports; Receive(active LOW) enables data from B ports to A ports.The Output Enable input, when HIGH, disables both A and B ports by placing them in a high-Z condition.

• Noninverting Buffers
BIDIRECTIONAL Data Path
• B OUTPUTS Sink 64 mA
• ESD>4000 Volts

Part Name(s) : DS3667 DS3667N National-Semiconductor
National ->Texas Instruments
Description : TRI-STATE BIDIRECTIONAL TRANSCEIVER View

General Description
The DS3667 is a high-speed Schottky 8-channel BIDIRECTIONAL TRANSCEIVER designed for digital information and communication systems. Pin selectable totem-pole/open collector OUTPUTS are provided at all driver OUTPUTS. This feature, together WITH the Dumb Mode which puts both driver and receiver OUTPUTS in TRI-STATE at the same time, means higher flexibility of system design. PNP inputs are used at all driver inputs for minimum loading, and hysteresis is provided at all receiver inputs for added noise margin. A power up/down protection circuit is included at all OUTPUTS to provide glitch-free operation during VCC power up or down.

Features
■ 8-channel BIDIRECTIONAL non-inverting TRANSCEIVERs
BIDIRECTIONAL control implemented WITH TRI-STATE output design
■ High speed Schottky design
■ Low power consumption
■ High impedance PNP inputs (drivers)
■ Pin selectable totem-pole/open collector OUTPUTS (drivers)
■ 500 mV (typ) input hysteresis (receivers)
■ Power up/down protection (glitch-free)
■ Dumb Mode capability

Part Name(s) : 54AC245MDA 54AC245WG-QML 5962-8766301BRA 5962-8766301MSA54ACT245FMQB 5962-8775801RA54AC245DMQB 5962-8775801SA54AC245FMQB 5962R8766301B2A 5962R8766301BRA 5962R8766301BSA AC245FM JM38510/75503B2A JM38510/75503BRA JM38510/75503BSA JM38510/75503BZA JM38510R75503BSA JM38510R75503S2A JM38510R75503SRA JM38510R75503SSA JM38510R75503SZA National-Semiconductor
National ->Texas Instruments
Description : OCTAL BIDIRECTIONAL TRANSCEIVER WITH TRI-STATE Inputs/OUTPUTS View

General Description
The ’AC/’ACT245 contains eight non-inverting BIDIRECTIONAL buffers WITH TRI-STATE OUTPUTS and is intended for bus-oriented applications. Current sinking capability is 24 mA at both the A and B ports. The Transmit/Receive (T/R) input determines the direction of data flow through the BIDIRECTIONAL TRANSCEIVER. Transmit (active-HIGH) enables data from A ports to B ports; Receive (active-LOW) enables data from B ports to A ports. The Output Enable input, when HIGH, disables both A and B ports by placing them in a HIGH Z condition.

Features
ICCand IOZreduced by 50%
Noninverting buffers
BIDIRECTIONAL data path
A and B OUTPUTS source/sink 24 mA
’ACT245 has TTL-compatible inputs
Standard Microcircuit Drawing (SMD)
   — ’AC245: 5962-87758
   — ’ACT245: 5962-87663

 

Part Name(s) : DP8308 DP8308N National-Semiconductor
National ->Texas Instruments
Description : 8-Bit TRI-STATE BIDIRECTIONAL TRANSCEIVER (Non-Inverting) View

General Description
The DP8308 is a high speed Schottky 8-bit TRI-STATE BIDIRECTIONAL TRANSCEIVER designed to provide BIDIRECTIONAL drive for bus oriented microprocessor and digital communications systems. It is capable of sinking 16 mA on the A ports and 48 mA on the B ports (bus ports). PNP inputs for low input current and an increased output high (VOH) level allow compatibility WITH MOS, CMOS, and other technologies that have a higher threshold and less drive capabilities. In addition, it features glitch-free power up/down on the B port preventing erroneous glitches on the system bus in power up or down.

Features
■ 8-bit BIDIRECTIONAL data flow reduces system package count
BIDIRECTIONAL TRI-STATE inputs/OUTPUTS interface WITH bus oriented systems
■ PNP inputs reduce input loading
■ Output high voltage interfaces WITH TTL, MOS, and CMOS
■ 48 mA/300 pF bus drive capability
■ Pinouts simplify system interconnections
■ Independent T and R controls for versatility
■ Compact 20-pin dual-in-line package
■ Bus port glitch free power up/down

Part Name(s) : 54ABT245 54ABT245E-QML 54ABT245J-QML 54ABT245MDA 54ABT245MWA 54ABT245W-QML 5962-87629012A 5962-8762901RA 5962-8762901SA 5962-9214801Q2A 5962-9214801QRA 5962-9214801QSA National-Semiconductor
National ->Texas Instruments
Description : OCTAL BIDIRECTIONAL TRANSCEIVER WITH TRI-STATE OUTPUTS View

General Description
The ’ABT245 contains eight non-inverting BIDIRECTIONAL buffers WITH TRI-STATE OUTPUTS and is intended for bus-oriented applications. Current sinking capability is 48 mA on both the A and B ports. The Transmit/Receive (T/R) input determines the direction of data flow through the BIDIRECTIONAL TRANSCEIVER. Transmit (active HIGH) enables data from A ports to B ports; Receive (active LOW) enables data from B ports to A ports. The Output Enable input, when HIGH, disables both A and B ports by placing them in a High Z condition.

Features
BIDIRECTIONAL non-inverting buffers
■ A and B output sink capability of 48 mA, source capability of 24 mA
■ Guaranteed output skew
■ Guaranteed multiple output switching specifications
■ Output switching specified for both 50 pF and 250 pF loads
■ Guaranteed simultaneous switching, noise level and dynamic threshold performance
■ Guaranteed latchup protection
■ High impedance glitch-free bus loading during entire power up and power down cycle
■ Non-destructive hot insertion capability
■ Disable time is less than enable time to avoid bus contention
■ Standard Microcircuit Drawing (SMD) 5962-9214801

 

1

2345678910 Next

All Rights Reserved © datasheetbank.com 2014 - 2019 [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]