datasheetbank_Logo    Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site
Part Name  

P/N + Description + Content Search

Search Words :

Part Name(s) : SN54LV574 SN54LV574FK SN54LV574J SN54LV574W SN74LV574 SN74LV574DB SN74LV574DW SN74LV574PW TI
Texas Instruments
Description : OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS WITH 3-STATE OUTPUTS

These OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS are designed for 2.7-V to 5.5-V VCCoperation. The ’LV574 feature 3-STATE OUTPUTS designed specifically for driving highly capacitive or relatively low-impedance loads. This device is particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers.

View
Part Name(s) : SN74HCT574PWE4 SN74HCT574PWRE4 SN74HCT574PWTE4 SN74HCT574NSRE4 TI
Texas Instruments
Description : OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS WITH 3-STATE OUTPUTS

description/ordering information
These OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS feature 3-STATE OUTPUTS designed specifically for bus driving. The ’HCT574 devices are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers.

● Operating Voltage Range of 4.5 V to 5.5 V
● High-Current 3-STATE Noninverting OUTPUTS Drive Bus Lines Directly or Up To 15 LSTTL Loads
● Low Power Consumption, 80-µA Max ICC
● Typical tpd = 22 ns
● ±6-mA Output Drive at 5 V
● Low Input Current of 1 µA Max
● Inputs Are TTL-Voltage Compatible
● Bus-Structured Pinout

View
Part Name(s) : 5962-8872801RA ALS564B SN54ALS564B SN54ALS564BFK SN54ALS564BJ SN54ALS564BW SN74ALS564B SN74ALS564BDW SN74ALS564BN SN74ALS564BNSR SNJ54ALS564BJ TI
Texas Instruments
Description : OCTAL D-TYPE EDGE-TRIGGERED FLIP-FLOPS WITH 3-STATE OUTPUTS

description
These OCTAL D-TYPE EDGE-TRIGGERED FLIP-FLOPS feature inverting 3-STATE OUTPUTS designed specifically for bus driving. They are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers.

3-STATE Buffer-Type Inverting OUTPUTS Drive Bus Lines Directly
• Bus-Structured Pinout
• Buffered Control Inputs
• Package Options Include Plastic Small-Outline (DW) Packages, Ceramic Chip Carriers (FK), Standard Plastic (N) and Ceramic (J) 300-mil DIPs, and Ceramic Flat (W) Packages

View
Part Name(s) : SN54AC534 SN54AC534J SN54AC534W SN74AC534 SN74AC534DB SN74AC534NS SNJ54AC534FK SNJ54AC534J SNJ54AC534W SN74AC534DBR SN74AC534DW SN74AC534DWR SN74AC534NSR SN74AC534PW SN74AC534PWR SN74AC534N AC534 Texas-Instruments
Texas Instruments
Description : OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS WITH 3-STATE OUTPUTS

description/ordering information
These OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS feature 3-STATE OUTPUTS designed specifically for driving highly capacitive or relatively low-impedance loads. The devices are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers.

● 2-V to 6-V VCC Operation
● Inputs Accept Voltages to 6 V
● Max tpd of 11 ns at 5 V
3-STATE Inverting OUTPUTS Drive Bus Lines Directly
● Full Parallel Access for Loading

View
Part Name(s) : SN54ACT564 SN74ACT564 SN74ACT564DBR SN74ACT564DW SN74ACT564DWR SN74ACT564NSR SN74ACT564PW SN74ACT564PWR SNJ54ACT564FK SNJ54ACT564J SNJ54ACT564W SN74ACT564N ACT564 AD564 Texas-Instruments
Texas Instruments
Description : OCTAL D-TYPE EDGE-TRIGGERED FLIP-FLOPS WITH 3-STATE OUTPUTS

description/ordering information
The ’ACT564 devices are OCTAL D-TYPE EDGE-TRIGGERED FLIP-FLOPS that feature 3-STATE OUTPUTS designed specifically for driving highly capacitive or relatively low-impedance loads. They are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers.

● 4.5-V to 5.5-V VCC Operation
● Inputs Accept Voltages to 5.5 V
● Max tpd of 8.5 ns at 5 V
● Inputs Are TTL-Voltage Compatible
3-STATE Inverted OUTPUTS Drive Bus Lines Directly
● Flow-Through Architecture to Optimize PCB Layout
● Full Parallel Access for Loading

View
Part Name(s) : CD54AC374 CD54AC374F3A CD54AC534 CD54ACT374 CD54ACT374F3A CD54ACT534 CD54ACT534F3A CD74AC374 CD74AC374E CD74AC374EE4 CD74AC374M CD74AC374M96 CD74AC374M96E4 CD74AC374M96G4 CD74AC374ME4 CD74AC374MG4 CD74AC534 CD74AC534M96 CD74AC534M96E4 CD74AC534M96G4 CD74ACT374 CD74ACT374E CD74ACT374EE4 CD74ACT374M CD74ACT374M96 TI
Texas Instruments
Description : OCTAL D-TYPE FLIP-FLOPS, 3-STATE Positive-Edge Triggered

OCTAL D-TYPE FLIP-FLOPS, 3-STATE Positive-Edge Triggered

View
Part Name(s) : SN54AC534 SN54AC534J SN54AC534W SN74AC534 SN74AC534DB SN74AC534DBLE SN74AC534DBR SN74AC534DW SN74AC534DWR SN74AC534NS SN74AC534NSR SN74AC534PW SN74AC534PWLE SN74AC534PWR SNJ54AC534FK SNJ54AC534J SNJ54AC534W SN74AC534N AC534 TI
Texas Instruments
Description : OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS WITH 3-STATE OUTPUTS

description/ordering information
These OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS feature 3-STATE OUTPUTS designed specifically for driving highly capacitive or relatively low-impedance loads. The devices are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers.

● 2-V to 6-V VCC Operation
● Inputs Accept Voltages to 6 V
● Max tpd of 11 ns at 5 V
3-STATE Inverting OUTPUTS Drive Bus Lines Directly
● Full Parallel Access for Loading

View
Part Name(s) : AC564 SN74AC564 SN74AC564DB SN74AC564DBR SN74AC564DW SN74AC564DWR SN74AC564N SN74AC564NS SN74AC564NSR SN74AC564PW SN74AC564PWR SNJ54AC564FK SNJ54AC564J SNJ54AC564W SN54AC564J SN54AC564W SN54AC564FK Texas-Instruments
Texas Instruments
Description : OCTAL D-TYPE EDGE-TRIGGERED FLIP-FLOPS WITH 3-STATE OUTPUTS

description/ordering information
The ’AC564 devices are OCTAL D-TYPE EDGE-TRIGGERED FLIP-FLOPS that feature inverting 3-STATE OUTPUTS designed specifically for driving highly capacitive or relatively low-impedance loads. They are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers.

● 2-V to 6-V VCC Operation
● Inputs Accept Voltages to 6 V
● Max tpd of 9 ns at 5 V
3-STATE Inverting OUTPUTS Drive Bus Lines Directly
● Full Parallel Access for Loading
● Flow-Through Architecture to Optimize PCB Layout

View
Part Name(s) : SN74F374DB TI
Texas Instruments
Description : OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS WITH 3-STATE OUTPUTS

description
These 8-bit FLIP-FLOPS feature 3-STATE OUTPUTS designed specifically for driving highly capacitive or relatively low-impedance loads. They are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers.
   
• Eight D-TYPE FLIP-FLOPS in a Single Package
3-STATE Bus-Driving True OUTPUTS
• Full Parallel Access for Loading
• Buffered Control Inputs
• Package Options Include Plastic
    Small-Outline (SOIC) and Shrink
    Small-Outline (SSOP) Packages, Ceramic
    Chip Carriers, and Plastic and Ceramic
    DIPs
   

View
Part Name(s) : 5962-9756201QRA 83020022A 8302002RA 8302002SA AS374 JM38510/37204B2A JM38510/37204BRA M38510/37204B2A M38510/37204BRA SN54ALS374A SN54AS374 SN74ALS374A SN74ALS374ADW SN74ALS374ADWR SN74ALS374ADWRE4 SN74ALS374ANE4 SN74ALS374ANSR SN74AS374 SN74AS374DW SN74AS374N SNJ54ALS374AFK SNJ54ALS374AJ SNJ54ALS374AW SNJ54AS374J SN54ALS374AJ Texas-Instruments
Texas Instruments
Description : OCTAL D-TYPE EDGE-TRIGGERED FLIP-FLOPS WITH 3-STATE OUTPUTS

description
These OCTAL D-TYPE EDGE-TRIGGERED FLIP-FLOPS feature 3-STATE OUTPUTS designed specifically for driving highly capacitive or relatively low-impedance loads. They are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers.

D-TYPE FLIP-FLOPS in a Single Package WITH 3-STATE Bus Driving True OUTPUTS
● Full Parallel Access for Loading
● Buffered Control Inputs
● Package Options Include Plastic Small-Outline (DW) Packages, Ceramic Chip Carriers (FK), and Standard Plastic (N) and Ceramic (J) DIPs

View

1

2345678910 Next

 

All Rights Reserved © datasheetbank.com 2014 - 2019 [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]