datasheetbank_Logo     Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

P/N + Description + Content Search

Search Words :

Part Name(s) : HD74LS241 HD74LS241FPEL HD74LS241P Renesas
Renesas Electronics
Description : OCTAL BUFFERS / Line DRIVERS / Line Receivers (non inverted three-state OUTPUTS) View

OCTAL BUFFERS / Line DRIVERS / Line Receivers (non inverted three-state OUTPUTS)

Part Name(s) : 74F240 74F240PC 74F240PCX 74F240SC 74F240SCX 74F240SJ 74F240SJX 74F241 74F241PC 74F241PCX 74F241SC 74F241SCX 74F241SJX 74F244 74F244CW 74F244MSA 74F244MSAX 74F244PC 74F244SC 74F244SCX 74F244SJ 74F244SJX Fairchild
Fairchild Semiconductor
Description : OCTAL BUFFERS/Line DRIVERS WITH 3-STATE OUTPUTS View

General Description
The 74F240, 74F241 and 74F244 are OCTAL BUFFERS and line DRIVERS designed to be employed as memory and address DRIVERS, clock DRIVERS and bus-oriented transmitters/receiv ers which provide improved PC and board density.

Features
3-STATE OUTPUTS drive bus lines or buffer memoryaddress registers
OUTPUTS sink 64 mA (48 mA mil)
■12 mA source current
■Input clamp diodes limit high-speed termination effects

Part Name(s) : HD74LVCZ244A Hitachi
Hitachi -> Renesas Electronics
Description : OCTAL BUFFERS / Line DRIVERS WITH 3–state OUTPUTS View

Description
The HD74LVCZ244A has eight line DRIVERS WITH three state OUTPUTS in a 20 pin package. This device is a noninverting buffer and has two active low enables (1G and 2G). Each enable independently controls four BUFFERS.

Features
• VCC = 2.7 to 5.5 V
• All inputs VIH (Max) = 5.5 V (@VCC = 0 to 5.5 V)
• All OUTPUTS VO (Max) = 5.5 V (@VCC = 0 V or output off state)
• Typical VOL ground bounce < 0.8 V (@VCC = 3.3 V, Ta = 25°C)
• Typical VOH undershoot > 2.0 V (@VCC = 3.3 V, Ta = 25°C)
• High impedance state during power up and power down
• Power off disables OUTPUTS, permitting live insertion
• High output current ±24 mA (@VCC = 3.0 to 5.5 V)

Part Name(s) : U74AC244 U74AC244G-P20-R U74AC244G-P20-T U74AC244L U74AC244L-P20-R U74AC244L-P20-T U74AC244G UTC
Unisonic Technologies
Description : OCTAL BUFFERS/DRIVERS WITH 3-STATE OUTPUTS View

DESCRIPTION
The U74AC244 is a OCTAL BUFFERS/DRIVERS WITH 3-STATE OUTPUTS. It is organized as two 4-bit BUFFERS/DRIVERS WITH separate output-enable ( OE ) inputs. When OE is high, the Y OUTPUTS are in a high-impedance state, and the OUTPUTS neither load nor drive the bus lines. When OE is low, the device passes noninverted data from the A inputs to the Y OUTPUTS

FEATURES
* Wide supply voltage range from 2V to 6V
* Max tpd of 7 ns from A to Y at 5V
* Low power consumption, ICC = 4 μA (Max.) at 5.5V
* ±24 mA output driver at 5.5V


Part Name(s) : HD74LVC2244A Hitachi
Hitachi -> Renesas Electronics
Description : OCTAL BUFFERS / Line DRIVERS WITH 3–state OUTPUTS View

Description
The HD74LVC2244A has eight line DRIVERS WITH three state OUTPUTS in a 20 pin package. This device is a noninverting buffer and has two active low enables (1G and 2G). Each enable independently controls four BUFFERS.

Features
• VCC = 1.65 to 5.5 V
• All inputs VIH (Max) = 5.5 V (@VCC = 0 to 5.5 V)
• All OUTPUTS VO (Max) = 5.5 V (@VCC = 0 V or output off state)
• Typical VOL ground bounce < 0.8 V (@VCC = 3.3 V, Ta = 25°C)
• Typical VOH undershoot > 2.0 V (@VCC = 3.3 V, Ta = 25°C)
• High output current ±12 mA (@VCC = 3.0 to 5.5 V)
• All OUTPUTS have equivalent 26 Ω series resistors, so no external resistors are required

Part Name(s) : HD74LVC2244A HD74LVC2244AFPEL HD74LVC2244ATELL Renesas
Renesas Electronics
Description : OCTAL BUFFERS / Line DRIVERS WITH 3–state OUTPUTS View

Description
The HD74LVC2244A has eight line DRIVERS WITH three state OUTPUTS in a 20 pin package. This device is a noninverting buffer and has two active low enables (1G and 2G). Each enable independently controls four BUFFERS.

Features
• VCC = 1.65 to 5.5 V
• All inputs VIH (Max) = 5.5 V (@VCC = 0 to 5.5 V)
• All OUTPUTS VO (Max) = 5.5 V (@VCC = 0 V or output off state)
• Typical VOL ground bounce < 0.8 V (@VCC = 3.3 V, Ta = 25°C)
• Typical VOH undershoot > 2.0 V (@VCC = 3.3 V, Ta = 25°C)
• High output current ±12 mA (@VCC = 3.0 to 5.5 V)
• All OUTPUTS have equivalent 26 Ω series resistors, so no external resistors are required

Part Name(s) : HD74LVCZ240A Hitachi
Hitachi -> Renesas Electronics
Description : OCTAL BUFFERS / Line DRIVERS WITH 3–state OUTPUTS View

Description
The HD74LVCZ240A has eight inverter DRIVERS WITH three state OUTPUTS in a 20 pin package. This device is a inverting buffer and has two active low enables (1G and 2G). Each enable independently controls four BUFFERS.
When VCC is between 0 and 1.5 V, the device is in the high impedance state during power up or power down.
Low voltage and high speed operation is suitable at battery drive product (note type personal computer) and low power consumption extends the life of a battery for long time operation.

Features
• VCC = 2.7 to 5.5 V
• All inputs VIH (Max) = 5.5 V (@VCC = 0 to 5.5 V)
• All OUTPUTS VO (Max) = 5.5 V (@VCC = 0 V or output off state)
• Typical VOL ground bounce < 0.8 V (@VCC = 3.3 V, Ta = 25°C)
• Typical VOH undershoot > 2.0 V (@VCC = 3.3 V, Ta = 25°C)
• High impedance state during power up and power down
• Power off disables OUTPUTS, permitting live insertion
• High output current ±24 mA (@VCC = 3.0 to 5.5 V)

Part Name(s) : HD74LVCZ240A HD74LVCZ240AFPEL HD74LVCZ240ATELL Renesas
Renesas Electronics
Description : OCTAL BUFFERS / Line DRIVERS WITH 3–state OUTPUTS View

Description
The HD74LVCZ240A has eight inverter DRIVERS WITH three state OUTPUTS in a 20 pin package. This device is an inverting buffer and has two active low enables (1G and 2G). Each enable independently controls four BUFFERS.
When VCC is between 0 and 1.5 V, the device is in the high impedance state during power up or power down.
Low voltage and high-speed operation is suitable at battery drive product (note type personal computer) and low power consumption extends the life of a battery for long time operation.

Features
• VCC = 2.7 to 5.5 V
• All inputs VIH (Max) = 5.5 V (@VCC = 0 to 5.5 V)
• All OUTPUTS VO (Max) = 5.5 V (@VCC = 0 V or output off state)
• Typical VOL ground bounce < 0.8 V (@VCC = 3.3 V, Ta = 25°C)
• Typical VOH undershoot > 2.0 V (@VCC = 3.3 V, Ta = 25°C)
• High impedance state during power up and power down
• Power off disables OUTPUTS, permitting live insertion
• High output current ±24 mA (@VCC = 3.0 to 5.5 V)

Part Name(s) : HD74LVC240A Hitachi
Hitachi -> Renesas Electronics
Description : OCTAL BUFFERS / Line DRIVERS WITH 3-STATE OUTPUTS View

Description
The HD74LVC240A has eight inverter DRIVERS WITH three state OUTPUTS in a 20 pin package. This device is a inverting buffer and has two active low enables (1G and 2G). Each enable independently controls four BUFFERS. Low voltage and high speed operation is suitable at the battery drive product (note type personal computer) and low power consumption extends the life of a battery for long time operation.

Features
• VCC = 2.0 V to 5.5 V
• All inputs VIH (Max.) = 5.5 V (@VCC = 0 V to 5.5 V)
• All OUTPUTS VOUT (Max.) = 5.5 V (@VCC = 0 V or output off state)
• Typical VOL ground bounce < 0.8 V (@VCC = 3.3 V, Ta = 25°C)
• Typical VOH undershoot > 2.0 V (@VCC = 3.3 V, Ta = 25°C)
• High output current ±24 mA (@VCC = 3.0 V to 5.5 V)

1

2345678910 Next

All Rights Reserved © datasheetbank.com 2014 - 2020 [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]