datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

P/N + Description + Content Search

Search Word's :
Part Name(s) : NY7805C
Unspecified
Unspecified
Description : 3-Terminal Positive Voltage regulator

3-Terminal Positive Voltage regulator

Part Name(s) : TO220
Diodes Incorporated.
Diodes Incorporated.
Description : package information - TO220

package information - TO220

Description : 5-V Low-Drop Voltage Regulator

Functional Description
TLE 4267 is a 5-V low-drop voltage regulator in a TO220-7 package. It supplies an output current of > 400 mA. The IC is shortcircuit-proof and incorporates temperature protection that disables the IC at overtemperature.


Features
● Output voltage tolerance ≤ ± 2 %
● Low-drop voltage
● Very low standby current consumption
● Input voltage up to 40 V
● Overvoltage protection up to 60 V (≤ 400 ms)
● Reset function down to 1 V output voltage
● ESD protection up to 2000 V
● Adjustable reset time
● On/off logic
● Overtemperature protection
● Reverse polarity protection
● Short-circuit proof
● Wide temperature range
● Suitable for use in automotive electronics

Application
The IC regulates an input voltage VI in the range 5.5 V < VI < 40 V to VQrated = 5.0 V. A reset signal is generated for an output voltage VQ of < 4.5 V. The reset delay can be set with an external capacitor. The device has two logic inputs. It is turned-ON by a voltage of > 4 V on E2 by the ignition for example. It remains active as a function of the voltage on E6, even if the voltage on E2 goes Low. This makes it possible to implement a self holding circuit without external components. When the device is turned-OFF, the output voltage drops to 0 V and current consumption tends towards 0 µA.

Part Name(s) : TO-220 TO220
International Rectifier
International Rectifier
Description : TO-220 package 3-Pin

(T) TO-220 package 3-Pin

Infineon Technologies
Infineon Technologies
Description : OptiMOS™3 Power-Transistor

Features
• Ideal for high frequency switching and sync. rec.
• Optimized technology for DC/DC converters
• Excellent gate charge x R DS(on) product (FOM)
• Very low on-resistance RDS(on)
• N-channel, normal level
• 100% avalanche tested
• Pb-free plating; RoHS compliant
• Qualified according to JEDEC1) for target applications
• Halogen-free according to IEC61249-2-21

Infineon Technologies
Infineon Technologies
Description : Off-Line SMPS Current Mode Controller with integrated 650V CoolMOS® and Startup cell (frequency jitter Mode) in FullPak

Description
The CoolSET®-F3R FullPak is the enhanced version of CoolSET®-F3 and targets for the Off-Line Adapters and high power range SMPS in DVD R/W, DVD Combi, set top box, etc. It has a wide Vcc range to 25V by adopting the BiCMOS technology. With the merit of Active Burst Mode, it can achieve the lowest Standby Power Requirements (<100mW) at no load and Vin = 270VAC. Since the controller is always active during the Active Burst Mode, it is an immediate response on load jumps and leads to <1% voltage ripple voltage at output. In case of protection for Overtemperature, Overvoltage, Open loop and Overload conditions, it would enter Auto Restart Mode. Thanks for the internal precise peak current limitation, it can provide accurate information to optimize the dimension of the transformer and the output diode. The built-in blanking window can provide sufficient buffer time before entering the Auto Restart Mode. In case of longer blanking time, a simply addition of capacitor to BA pin can serve the purpose. Furthermore, the built-in frequency jitter function can effectively reduce the EMI noise and further reduce the scale of input filter. The component counts can further be reduced with the various built-in functions such as soft start, blanking time and frequency jitter.

Product Highlights
TO220 FullPak with low Rdson MOSFET for high power application
• Active Burst Mode to reach the lowest Standby Power Requirements
   < 100mW
• Auto Restart protection for overload, overtemperature, overvoltage
• External auto-restart enable function
• Built-in soft start and blanking window
• Extendable blanking Window for high load jumps
• Built-in frequency jitter and soft driving for low EMI
• Green Mould Compound
• Pb-free lead plating; RoHS compliant

Features
• 650V avalanche rugged CoolMOS® with built-in
   Startup Cell
• Active Burst Mode for lowest Standby Power
• Fast load jump response in Active Burst Mode
• 67kHz internally fixed switching frequency
• Auto Restart Protection Mode for Overload,
   Open Loop, VCC Undervoltage,
   Overtemperature & Overvoltage
• Built-in Soft Start
• Built-in blanking window with extendable
   blanking time for short duration high current
• External auto-restart enable pin
• Max Duty Cycle 75%
• Overall tolerance of Current Limiting < ±5%
• Internal PWM Leading Edge Blanking
• BiCMOS technology provide wide VCC range
• Built-in Frequency jitter and soft driving for low
   EMI

Part Name(s) : BYT08-400-220M
Semelab - > TT Electronics plc
Semelab - > TT Electronics plc
Description : DUAL FAST RECOVERY RECTIFIER IN TO220 METAL package FOR HI–REL APPLICATIONS

DUAL FAST RECOVERY RECTIFIER IN TO220 METAL package FOR HI–REL APPLICATIONS



FEATURES

• HERMETIC TO220 METAL package

• ISOLATED CASE


Description : 5-V Low Drop Voltage Regulator

Functional Description
TLE 4267 is a 5-V low drop voltage regulator for automotive applications in the PG-TO220-7 or PG-DSO-14-30 package. It supplies an output current of > 400 mA. The IC is shortcircuit-proof and has an overtemperature protection circuit.

Features
• Output voltage tolerance ≤ ±2%
• 400 mA output current capability
• Low-drop voltage
• Very low standby current consumption
• Input voltage up to 40 V
• Overvoltage protection up to 60 V (≤ 400 ms)
• Reset function down to 1 V output voltage
• ESD protection up to 2000 V
• Adjustable reset time
• On/off logic
• Overtemperature protection
• Reverse polarity protection
• Short-circuit proof
• Wide temperature range
• Suitable for use in automotive electronics
• Green Product (RoHS compliant)
• AEC Qualified

Application
The IC regulates an input voltage VI in the range of 5.5 V < VI < 40 V to a nominal output voltage of VQ = 5.0 V. A reset signal is generated for an output voltage of VQ < VRT (typ. 4.5 V). The reset delay can be set with an external capacitor. The device has two logic inputs. A voltage of VE2 > 4.0 V given to the E2-pin (e.g. by ignition) turns the device on. Depending on the voltage on pin E6 the IC may be hold in active-state even if VE2 goes to low level. This makes it simple to implement a self-holding circuit without external components. When the device is turned off, the output voltage drops to 0 V and current consumption tends towards 0 μA.

Part Name(s) : NTE597
NTE Electronics
NTE Electronics
Description : Silicon Rectifier Ultra Fast, 200V, 8A

Description:
The NTE597 is a silicon rectifier in a 2–Lead TO220 type package designed for use in switching power supplies, inverters and as free wheeling diodes.

Features:
● Ultrafast 50ns Recovery Time
● 175°C Operating Junction Temperature
● Popular TO220 package
● Epoxy meets UL94, VO @ 1/8”
● Low Forward Voltage
● Low Leakage Current
● High Temperature Glass Passivated Junction

Description : CoolMOS® Power Transistor

Feature
• New revolutionary high voltage technology
• Worldwide best RDS(on) in TO 220
• Ultra low gate charge
• Periodic avalanche rated
• Extreme dv/dt rated
• Ultra low effective capacitances
• Improved transconductance
• P-TO-220-3-31: Fully isolated package (2500 VAC; 1 minute)

12345678910 Next

All Rights Reserved© datasheetbank.com  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]