datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

P/N + Description + Content Search

Search Word's :
Description : Military COTS DC/DC Converters

Military COTS DC/DC Converters

The MilQor series of MIL COTS DC/DC converters brings SynQor’s field proven high-efficiency synchronous rectification technology to the Military/Aerospace industry. SynQor’s ruggedized encased packaging approach ensures survivability in demanding environments. Compatible with the industry standard format, these converters operate at a fixed frequency, and follow conservative component derating guidelines. They are designed and manufactured to comply with a wide range of military standards

Operational Features
•  High efficiency, 90% at full rated load current
•  Operating input voltage range: 16-40 V
•  Fixed frequency switching provides predictable EMI
•  No minimum load requirement

Mechanical Features
•  Industry standard quarter-brick Pin-out configuration
•  Size: 1.54" x 2.39" x 0.50" (39.0 x 60.6 x 12.7mm)
•  Total weight: 3 oz (85 g)

Control Features
•  On/Off control referenced to input side
•  Remote sense for the output voltage
•  Output voltage trim range of -20%, +10%

Safety Features
•  2250 V, 30 MW input-to-output isolation
• Certified 60950-1 requirements for basic insulation (see Standards and Qualifications page)
• CE Marked
• RoHS compliant

Protection Features
•  Input under-voltage lockout
•  Output current limit and short circuit protection
•  Active back bias limit
•  Output over-voltage protection
•  Thermal shutdown

Description : KK 156 HOUSING PCB 41815 SERIES

KK 156 HOUSING PCB 41815 SERIES

Description : High Performance E2CMOS® In-System Programmable Logic

GENERAL DESCRIPTION
The ispMACH™ 4A family from Lattice offers an exceptionally flexible architecture and delivers a superior Complex Programmable Logic Device (CPLD) solution of easy-to-use silicon products and software tools. The overall benefits for users are a guaranteed and predictable CPLD solution, faster time-to-market, greater flexibility and lower cost. The ispMACH 4A devices offer densities ranging from 32 to 512 macrocells with 100% utilization and 100% Pin-out retention. The ispMACH 4A families offer 5-V (M4A5- xxx) and 3.3-V (M4A3-xxx) operation.

FEATURES
◆ High-performance, E2CMOS 3.3-V & 5-V CPLD families
◆ Flexible architecture for rapid logic designs
    — Excellent First-Time-FitTM and refit feature
    — SpeedLockingTM performance for guaranteed fixed timing
    — Central, input and output switch matrices for 100% routability and 100% Pin-out retention
◆ High speed
    — 5.0ns tPD Commercial and 7.5ns tPD Industrial
    — 182MHz fCNT
◆ 32 to 512 macrocells; 32 to 768 registers
◆ 44 to 388 Pins in PLCC, PQFP, TQFP, BGA, fpBGA and caBGA packages
◆ Flexible architecture for a wide range of design styles
    — D/T registers and latches
    — Synchronous or asynchronous mode
    — Dedicated input registers
    — Programmable polarity
    — Reset/ preset swapPing
◆ Advanced capabilities for easy system integration
    — 3.3-V & 5-V JEDEC-compliant operations
    — JTAG (IEEE 1149.1) compliant for boundary scan testing
    — 3.3-V & 5-V JTAG in-system programming
    — PCI compliant (-5/-55/-6/-65/-7/-10/-12 speed grades)
    — Safe for mixed supply voltage system designs
    — Programmable pull-up or Bus-FriendlyTM inputs and I/Os
    — Hot-socketing
    — Programmable security bit
    — Individual output slew rate control
◆ Advanced E2CMOS process provides high-performance, cost-effective solutions
◆ Lead-free package options

Description : High Performance E2CMOS® In-System Programmable Logic

GENERAL DESCRIPTION
The MACH® 4 family from Lattice offers an exceptionally flexible architecture and delivers a superior Complex Programmable Logic Device (CPLD) solution of easy-to-use silicon products and software tools. The overall benefits for users are a guaranteed and predictable CPLD solution, faster time-to-market, greater flexibility and lower cost. The MACH 4 devices offer densities ranging from 32 to 256 macrocells with 100% utilization and 100% Pin-out retention.
The MACH 4 family offer 5-V (M4-xxx) and 3.3-V (M4LV-xxx) operation.

FEATURES
◆ High-performance, E2CMOS 3.3-V & 5-V CPLD families
◆ Flexible architecture for rapid logic designs
    — Excellent First-Time-FitTM and refit feature
    — SpeedLockingTM performance for guaranteed fixed timing
    — Central, input and output switch matrices for 100% routability and 100% Pin-out retention
◆ High speed
    — 7.5ns tPD Commercial and 10ns tPD Industrial
    — 111.1MHz fCNT
◆ 32 to 256 macrocells; 32 to 384 registers
◆ 44 to 256 Pins in PLCC, PQFP, TQFP and BGA packages
◆ Flexible architecture for a wide range of design styles
    — D/T registers and latches
    — Synchronous or asynchronous mode
    — Dedicated input registers
    — Programmable polarity
    — Reset/ preset swapPing
◆ Advanced capabilities for easy system integration
    — 3.3-V & 5-V JEDEC-compliant operations
    — JTAG (IEEE 1149.1) compliant for boundary scan testing
    — 3.3-V & 5-V JTAG in-system programming
    — PCI compliant (-7/-10/-12 speed grades)
    — Safe for mixed supply voltage system designs
    — Bus-FriendlyTM inputs and I/Os
    — Programmable security bit
    — Individual output slew rate control
◆ Advanced E2CMOS process provides high-performance, cost-effective solutions
◆ Supported by ispDesignEXPERTTM software for rapid logic development
    — Supports HDL design methodologies with results optimized for MACH 4
    — Flexibility to adapt to user requirements
    — Software partnerships that ensure customer success
◆ Lattice and third-party hardware programming support
    — LatticePROTM software for in-system programmability support on PCs and automated test equipment
    — Programming support on all major programmers including Data I/O, BP Microsystems, Advin, and System General

Description : High Performance E2CMOS® In-System Programmable Logic

GENERAL DESCRIPTION
The ispMACH™ 4A family from Lattice offers an exceptionally flexible architecture and delivers a superior Complex Programmable Logic Device (CPLD) solution of easy-to-use silicon products and software tools. The overall benefits for users are a guaranteed and predictable CPLD solution, faster time-to-market, greater flexibility and lower cost. The ispMACH 4A devices offer densities ranging from 32 to 512 macrocells with 100% utilization and 100% Pin-out retention. The ispMACH 4A families offer 5-V (M4A5-xxx) and 3.3-V (M4A3-xxx) operation.

FEATURES
◆ High-performance, E2CMOS 3.3-V & 5-V CPLD families
◆ Flexible architecture for rapid logic designs
   — Excellent First-Time-FitTM and refit feature
   — SpeedLockingTM performance for guaranteed fixed timing
   — Central, input and output switch matrices for 100% routability and 100% Pin-out retention
◆ High speed
   — 5.0ns tPD Commercial and 7.5ns tPD Industrial
   — 182MHz fCNT
◆ 32 to 512 macrocells; 32 to 768 registers
◆ 44 to 388 Pins in PLCC, PQFP, TQFP, BGA, fpBGA and caBGA packages
◆ Flexible architecture for a wide range of design styles
   — D/T registers and latches
   — Synchronous or asynchronous mode
   — Dedicated input registers
   — Programmable polarity
   — Reset/ preset swapPing
◆ Advanced capabilities for easy system integration
   — 3.3-V & 5-V JEDEC-compliant operations
   — JTAG (IEEE 1149.1) compliant for boundary scan testing
   — 3.3-V & 5-V JTAG in-system programming
   — PCI compliant (-5/-55/-6/-65/-7/-10/-12 speed grades)
   — Safe for mixed supply voltage system designs
   — Programmable pull-up or Bus-FriendlyTM inputs and I/Os
   — Hot-socketing
   — Programmable security bit
   — Individual output slew rate control
◆ Advanced E2CMOS process provides high-performance, cost-effective solutions
◆ Supported by ispDesignEXPERTTM software for rapid logic development
   — Supports HDL design methodologies with results optimized for ispMACH 4A
   — Flexibility to adapt to user requirements
   — Software partnerships that ensure customer success
◆ Lattice and third-party hardware programming support
   — LatticePROTM software for in-system programmability support on PCs
         and automated test equipment
   — Programming support on all major programmers including Data I/O, BP Microsystems,
         Advin, and System General

Description : TQ RELAYS Leading the market, our 5 mm 2-pole surface mount relays comply with JIS C0806

Leading the market, our 5 mm 2-pole surface mount relays comply with JIS C0806

FEATURES
1. Flat compact size
   14.0(L) ×9.0(W) ×5.0(H) .551(L) × .354(W) ×.197(H)
2. Nominal operating power:
   High sensitivity of 140mW (2 Form C single side stable type) By using the highly efficient polar
magnetic circuit “seesaw balance mechanism”, a nominal operating power of 140 mW (minimum operating power of 79 mW) has been achieved(4 Form C single side stable type is 280 mW).
3. Suitable for SMD automatic insertion (SA type)
   With a height of 5.6 mm .220 inch, the relays meet JIS C 0806 specifications.
4. High density mounting possible 
   High-efficiency magnetic circuits ensure low magnetic flux leakage. Because characteristics are little changed by proximity mounting, high density mounting is possible.
5. The use of gold-clad twin crossbar contacts ensures high contact reliability.
6. DIL terminal array enables use of IC sockets
7. Low thermal electromotive force
   As well as low power consumption of  140 mW, use of a structure with separate coil and contact sections has reduced thermal electromotive force to the low level of approximately 5 µV.
Surface mount types achieve approximately 2 µV.
8. Latching types also available
9. Self-clinching terminal also available
10. A range of surface-mount types is also available.
    SA: Low-profile surface-mount terminal type
    SL: High connection reliability surface mount terminal type
    SS: Space saving surface-mount terminal type
11. M.B.B. contact types available

 
TYPICAL APPLICATIONS
1. Communications
2. Measurement equipment
3. OA equipment
4. Industrial machines

Description : ispMACH™ 4A CPLD Family High Performance E2CMOS® In-System Programmable Logic

GENERAL DESCRIPTION
The ispMACH™ 4A family from Lattice offers an exceptionally flexible architecture and delivers a superior Complex Programmable Logic Device (CPLD) solution of easy-to-use silicon products and software tools. The overall benefits for users are a guaranteed and predictable CPLD solution, faster time-to-market, greater flexibility and lower cost. The ispMACH 4A devices offer densities ranging from 32 to 512 macrocells with 100% utilization and 100% Pin-out retention.
The ispMACH 4A families offer 5-V (M4A5-xxx) and 3.3-V (M4A3-xxx) operation.
   
FEATURES
◆ High-performance, E2CMOS 3.3-V & 5-V CPLD families
◆ Flexible architecture for rapid logic designs
    — Excellent First-Time-FitTM and refit feature
    — SpeedLockingTM performance for guaranteed fixed timing
    — Central, input and output switch matrices
        for 100% routability and 100% Pin-out retention
◆ High speed
    — 5.0ns tPD Commercial and 7.5ns tPD Industrial
    — 182MHz fCNT
◆ 32 to 512 macrocells; 32 to 768 registers
◆ 44 to 388 Pins in PLCC, PQFP, TQFP, BGA, fpBGA and caBGA packages
◆ Flexible architecture for a wide range of design styles
    — D/T registers and latches
    — Synchronous or asynchronous mode
    — Dedicated input registers
    — Programmable polarity
    — Reset/ preset swapPing
◆ Advanced capabilities for easy system integration
    — 3.3-V & 5-V JEDEC-compliant operations
    — JTAG (IEEE 1149.1) compliant for boundary scan testing
    — 3.3-V & 5-V JTAG in-system programming
    — PCI compliant (-5/-55/-6/-65/-7/-10/-12 speed grades)
    — Safe for mixed supply voltage system designs
    — Programmable pull-up or Bus-FriendlyTM inputs and I/Os
    — Hot-socketing
    — Programmable security bit
    — Individual output slew rate control
◆ Advanced E2CMOS process provides high-performance, cost-effective solutions
◆ Supported by ispDesignEXPERTTM software for rapid logic development
    — Supports HDL design methodologies with results optimized
        for ispMACH 4A
    — Flexibility to adapt to user requirements
    — Software partnerships that ensure customer success
◆ Lattice and third-party hardware programming support
    — LatticePROTM software for in-system programmability support
        on PCs and automated test equipment
    — Programming support on all major programmers
        including Data I/O, BP Microsystems, Advin,
        and System General
   

Description : MILITARY COTS EMI FILTER

The Mil-COTS series of EMI flters brings SynQor’s feld proven technology and manufacturing expertise to the industrial power applications marketplace. SynQor’s innovative packaging approach ensures survivability in the most hostile environments. Compatible with the industry standard format, these flters have high differential-mode and commonmode attenuation, low DC resistance, and a stabilizing bulk capacitor resistor. They follow conservative component derating guidelines and they are designed and manufactured to the highest standards.

Operational Features
•  30A output current
• Very low DC resistance
• > 80 dB differential-mode resistance at 250kHz
• > 36 dB common-mode resistance at 250kHz
• Stabalizing bulk capacitor and damPing resistor included
• All capacitors are X7R multi-layer ceramic

Description : High Performance E2CMOS® In-System Programmable Logic

GENERAL DESCRIPTION
The ispMACH™ 4A family from Lattice offers an exceptionally flexible architecture and delivers a superior Complex Programmable Logic Device (CPLD) solution of easy-to-use silicon products and software tools. The overall benefits for users are a guaranteed and predictable CPLD solution, faster time-to-market, greater flexibility and lower cost. The ispMACH 4A devices offer densities ranging from 32 to 512 macrocells with 100% utilization and 100% Pin-out retention. The ispMACH 4A families offer 5-V (M4A5-xxx) and 3.3-V (M4A3-xxx) operation.

FEATURES
◆ High-performance, E2CMOS 3.3-V & 5-V CPLD families
◆ Flexible architecture for rapid logic designs
   — Excellent First-Time-FitTM and refit feature
   — SpeedLockingTM performance for guaranteed fixed timing
   — Central, input and output switch matrices for 100% routability and 100% Pin-out retention
◆ High speed
   — 5.0ns tPD Commercial and 7.5ns tPD Industrial
   — 182MHz fCNT
◆ 32 to 512 macrocells; 32 to 768 registers
◆ 44 to 388 Pins in PLCC, PQFP, TQFP, BGA, fpBGA and caBGA packages
◆ Flexible architecture for a wide range of design styles
   — D/T registers and latches
   — Synchronous or asynchronous mode
   — Dedicated input registers
   — Programmable polarity
   — Reset/ preset swapPing
◆ Advanced capabilities for easy system integration
   — 3.3-V & 5-V JEDEC-compliant operations
   — JTAG (IEEE 1149.1) compliant for boundary scan testing
   — 3.3-V & 5-V JTAG in-system programming
   — PCI compliant (-5/-55/-6/-65/-7/-10/-12 speed grades)
   — Safe for mixed supply voltage system designs
   — Programmable pull-up or Bus-FriendlyTM inputs and I/Os
   — Hot-socketing
   — Programmable security bit
   — Individual output slew rate control
◆ Advanced E2CMOS process provides high-performance, cost-effective solutions
◆ Supported by ispDesignEXPERTTM software for rapid logic development
   — Supports HDL design methodologies with results optimized for ispMACH 4A
   — Flexibility to adapt to user requirements
   — Software partnerships that ensure customer success
◆ Lattice and third-party hardware programming support
   — LatticePROTM software for in-system programmability support on PCs
         and automated test equipment
   — Programming support on all major programmers including Data I/O, BP Microsystems,
         Advin, and System General

Description : Single / Dual output DC-DC converter 1.5W ~ 25W

PP-SERIES Single output DC-DC converter 1.5W ~ 25W

Features
Compact and single output DC-DC converter Ultra-thin profile: 8mm
Wide input voltage range
   DC5V input: DC4.5 ~ 7.2V (PP25: 4.7V ~ 7.2V)
   DC12V input: DC9 ~ 18V (PP1R5 ~ PP10: 8V ~ 16.5V)
   DC24V input: DC18 ~ 36V (PP1R5 ~ PP10: 18V ~ 32V)
   DC48V input: DC36 ~ 72V (PP1R5 ~ PP10: 32V ~ 63V)
Operating temperature: –20 ~ +71°C
Isolation between input and output
PP15, PP25: Output voltage variable, on/off control
3 year warranty

PPD-SERIES Dual output DC-DC converter 1.5W ~ 10W

Features
Compact and dual output DC-DC converter Ultra-low profile: 8mm
Wide input voltage range
   DC5V input: DC4.5 ~ 7.2V
   DC12V input: DC8 ~ 16.5V
   DC24V input: DC18 ~ 32V
   DC48V input: DC32 ~ 63V
Operating temperature: –20 ~ +71°C
Isolation between input and output
3 year warranty

12345678910 Next

All Rights Reserved© datasheetbank.com  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]