datasheetbank_Logo     Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

P/N + Description + Content Search

Search Words :

Part Name(s) : Q32M210 Q32M210F08ALNA ON-Semiconductor
ON Semiconductor
Description : Precision MIXED-SIGNAL 32-bit MICROCONTROLLER View

Introduction
Q32M210 is a precision, MIXEDSIGNAL 32−bit MICROCONTROLLER. The MICROCONTROLLER is built on the high performance ARM® Cortex−M3 processor. The MICROCONTROLLER incorporates a highly configurable sensor interface designed to work directly with a wide range of sensors having multiple characteristics, including specialized electrochemical sensors. The sensor interface includes dual programmable gain amplifiers, dual 16−bit Analog−to−Digital converters, triple 10−bit Digital−to−Analog converters (for voltage waveform generation and other applications) and three uncommitted, low−noise opamps with configurable SIGNAL multiplexing. Flexible connectivity to external non−volatile memory, personal computers, wireless devices, LCD displays and a wide range of other peripherals is enabled by several digital interfaces including I2C, USB (2.0 full−speed compliant) and a high−speed SPI/SQI interface.

Part Name(s) : C8051F006 C8051F006-GQ Silabs
Silicon Laboratories
Description : 25 MIPS, 32 kB Flash, 12-Bit ADC, 48-Pin MIXED-SIGNAL MCU View

25 MIPS, 32 kB Flash, 12-Bit ADC, 48-Pin MIXED-SIGNAL MCU

Part Name(s) : C8051F000 C8051F001 C8051F002 C8051F005 C8051F006 C8051F007 C8051F010 C8051F011 C8051F012 C8051F015 C8051F016 C8051F017 ETC
Unspecified
Description : MIXED-SIGNAL 32KB ISP FLASH MCU Family View

[CYGNAL]

MIXED-SIGNAL 32KB ISP FLASH MCU Family

SYSTEM OVERVIEW
The C8051F000 family are fully integrated MIXED-SIGNAL System on a Chip MCUs with a true 12-bit multi-channel ADC (F000/01/02/05/06/07), or a true 10-bit multi-channel ADC  (F010/11/12/15/16/17). See the Product Selection Guide in Table 1.1 for a quick reference of each MCUs’ feature set. Each has a programmable gain pre-amplifier, two 12-bit DACs, two voltage comparators (except for the F002/07/12/17, which have one), a voltage reference, and an 8051-compatible MICROCONTROLLER core with 32kbytes of FLASH memory. There are also I2C/SMBus, UART, and SPI serial interfaces implemented in hardware (not “bit-banged” in user software) as well as a Programmable Counter/Timer Array (PCA) with five capture/compare modules. There are also 4 general-purpose 16-bit timers and 4 byte-wide general-purpose digital Port I/O. The C8051F000/01/02/10/11/12 have 256 bytes of RAM and execute up to 20MIPS, while the C8051F005/06/07/15/16/17 have 2304 bytes of RAM and execute up to 25MIPS.
With an on-board VDD monitor, WDT, and clock oscillator, the MCUs are truly stand-alone System-on-a-Chip solutions. Each MCU effectively configures and manages the analog and digital peripherals. The FLASH memory can be reprogrammed even in-circuit, providing non-volatile data storage, and also allowing field upgrades of the 8051 firmware. Each MCU can also individually shut down any or all of the peripherals to conserve power.

Part Name(s) : AD9876 AD9876-EB AD9876BST AD9876BSTRL ADI
Analog Devices
Description : Broadband Modem MIXED-SIGNAL Front End View

PRODUCT DESCRIPTION
The AD9876 is a single-supply broadband modem MIXED-SIGNAL front end (MxFE) IC. The device contains a transmit path interpolation filter and DAC and a receive path PGA, LPF, and ADC supporting a variety of broadband modem applications. Also on-chip is a PLL clock multiplier that provides all required clocks from a single crystal or clock input. The AD9876 provides 12-bit converter performance on both the Tx and Rx path.

FEATURES
Low Cost 3.3 V CMOS MIXED-SIGNAL Front End (MxFE™)
Converter for Broadband Modems
10-/12-Bit D/A Converter (TxDAC+®)
  64/32 MSPS Input Word Rate
  2/4 Interpolating LPF or BPF Transmit Filter
  128 MSPS DAC Output Update Rate
  Wide (26 MHz) Transmit Bandwidth
  Power-Down Mode
10-/12-Bit 50 MSPS A/D Converter
  Fourth Order Low-Pass Filter 12 MHz or 26 MHz with Bypass
  –6 dB to +36 dB Programmable Gain Amplifier
Internal Clock Multiplier (PLL)
Clock Outputs
Voltage Regulator Controller
48-Lead LQFP Package

APPLICATIONS
Powerline Networking
Home Phone Networking
xDSL
Broadband Wireless
Home RF


Part Name(s) : MAXQ3120 MAXQ3120-FFN MAXQ3120-FFN+ MaximIC
Maxim Integrated
Description : High-Precision ADC MIXED-SIGNAL MICROCONTROLLER View

General Description
The MAXQ3120 MICROCONTROLLER is a high-performance, 16-bit MICROCONTROLLER that incorporates dual, true-differential, 16-bit sigma-delta analog-to-digital converters (ADCs), a liquid-crystal display (LCD) interface that can drive up to 112 segments, and a real-time clock (RTC) module with a dedicated battery-backup supply. The MAXQ3120 is uniquely suited for the single-phase electricity metering market, but can be used in any application that requires high-performance operation.

Features
♦ High-Performance, Low-Power, 16-Bit RISC Core
    DC to 8MHz Operation, Approaching 1MIPS per MHz
    3.3V Core and I/O
    33 Instructions, Most Single-Cycle
    Three Independent Data Pointers Accelerate Data Movement with Automatic Increment/Decrement
    16-Level Hardware Stack
    16-Bit Instruction Word, 16-Bit Data Bus
    16 x 16-Bit, General-Purpose Working Registers
    Optimized for C-Compiler (High-Speed/Density Code)
♦ Program and Data Memory
    16kWords Flash Memory
    1,000,000 Flash Write/Erase Cycles
    256 Words of Internal Data RAM
    JTAG Bootloader for Programming
♦ Dual, 16-Bit Sigma-Delta ADCs
    Differential Analog Input Channels
    Programmable Gain of 1x or 16x
    Integrated Sinc3 Filters
    Digital Phase Compensation and Trimmable Bandgap Reference
♦ Peripheral Features
    Up to 32 General-Purpose I/O Pins
    112-Segment LCD Driver
        Up to 4 COM and 28 Segments
        Static, 1/2, and 1/3 LCD Bias Supported
        No External Resistors Required
    Two Serial USARTs, One with Infrared PWM Support
    One-Cycle, 16 x 16 Hardware Multiply/Accumulate with 40-Bit Accumulator
    Three 16-Bit Programmable Timers/Counters, One with Infrared PWM Support
    8-Bit, Subsecond, System Timer/Alarm
    Battery-Backed, 32-Bit RTC with Time-of-Day Alarm and Digital Trim
    Programmable Watchdog Timer
♦ Flexible Programming Interface
    Bootloader Simplifies Programming
    In-System Programming Through JTAG
    Supports In-Application Programming of Flash
    Memory
♦ Power Consumption
    < 28mA at 8MHz, 3.3V Flash Operation
    320µA Standby Current in Sleep Mode
    Low-Power Divide-by-256 Mode

Applications
    Single-Phase Electricity Metering
    Battery-Powered and Portable Devices
    Electrochemical and Optical Sensors
    Industrial Control
    Data-Acquisition Systems and Data Loggers
    Home Appliances
    Consumer Electronics
    Thermostats/Humidity Sensors
    Security Sensors
    Gas and Chemical Sensors
    HVAC
    Smart Transmitters

Part Name(s) : AD9867 ADI
Analog Devices
Description : Broadband Modem MIXED-SIGNAL Front End View

GENERAL DESCRIPTION
The AD9867 is a MIXED-SIGNAL front-end (MxFE) IC for transceiver applications requiring Tx and Rx path functionality with data rates up to 75 MSPS. Its flexible digital interface, power-saving modes, and high Tx-to-Rx isolation make the part well suited for half-duplex and full-duplex applications. The digital interface is extremely flexible allowing simple interfaces to digital back ends.

FEATURES
Low cost, 3.3 V CMOS MxFE® for broadband modems
10-bit digital-to-analog converter (DAC)
  2×/4× interpolation filter
  250 MSPS DAC update rate
10-bit, 75 MSPS ADC
Low noise RxPGA
  Dual channel muxed input
  6 dB input overload attenuator
  −12 dB to +48 dB (without attenuator)
  Third-order programmable low-pass filter
Flexible digital datapath interface
  Half-duplex and full-duplex operation
  Programmable delay Tx driver disable SIGNAL
Various power-down/reduction modes
Internal clock multiplier (PLL)
2 auxiliary programmable clock outputs
64-lead LFCSP

APPLICATIONS
Power-line networking

Part Name(s) : AD9860 AD9860BST AD9860PCB AD9862 AD9862BST AD9862BSTZ AD9862BSTZRL AD9862PCB ADI
Analog Devices
Description : MIXED-SIGNAL Front-End (MxFE™) Processor for Broadband Communications View

FEATURES
MIXED-SIGNAL Front-End Processor with Dual Converter  Receive and Dual Converter Transmit SIGNAL Paths
Receive SIGNAL Path Includes:
    Two 10-/12-Bit, 64 MSPS Sampling A/D Converters
    with Internal or External Independent References,
    Input Buffers, Programmable Gain Amplifiers,
    Low-Pass Decimation Filters, and a Digital Hilbert Filter
Transmit SIGNAL Path Includes:
    Two 12-/14-Bit, 128 MSPS D/A Converters with Programmable Full-Scale Output Current, Channel Independent Fine Gain and Offset Control, Digital Hilbert and Interpolation Filters, and Digitally Tunable  Real or Complex Up-Converters
Delay-Locked Loop Clock Multiplier and Integrated Timing Generation Circuitry Allow for Single Crystal or Clock Operation
Programmable Output Clocks, Serial Programmable Interface, Programmable Sigma-Delta, Three Auxiliary DAC Outputs and Two Auxiliary ADCs with Dual Multiplexed Inputs

APPLICATIONS
Broadband Wireless Systems
   Fixed Wireless, WLAN, MMDS, LMDS
Broadband Wireline Systems
   Cable Modems, VDSL, PowerPlug
Digital Communications
   Set-Top Boxes, Data Modems

Part Name(s) : MAXQ3100 MAXQ3100-EMN MAXQ3100-EMN+ MaximIC
Maxim Integrated
Description : MIXED-SIGNAL MICROCONTROLLER with Analog Comparators, LCD, and RTC View

General Description
The MAXQ3100 MICROCONTROLLER is a low-power, 16-bit RISC device that incorporates an integrated liquid-crystal display (LCD) interface that can drive up to 160 segments, two analog comparators with precision internal 1.25V reference voltage, and a real-time clock (RTC) module with a dedicated battery-backup supply.

Features
♦ High-Performance, Low-Power, 16-Bit RISC Core
    4.194MHz Operation, Approaching 1MIPS per MHz
    3.3V Core and I/O
    33 Instructions, Most Single-Cycle
    Three Independent Data Pointers Accelerate Data Movement with Automatic Increment/Decrement
    16-Level Hardware Stack
    16-Bit Instruction Word, 16-Bit Data Bus
    16 x 16-Bit, General-Purpose Working Registers
    Optimized for C-Compiler (High-Speed/Density Code)
♦ Program and Data Memory
    8kWords EEPROM
    200,000 EEPROM Write/Erase Cycles
    512 Words of Internal Data RAM
    JTAG-Compatible Debug Port Bootloader for Programming
♦ Peripheral Features
    Up to 27 General-Purpose I/O Pins, Most 5V Tolerant
    160-Segment LCD Driver
        Up to 4 COM and 40 Segments
        Static, 1/2, and 1/3 LCD Bias Supported
        No External Resistors Required
    Two Analog Comparators with Internal +1.25V Precision Reference
    Two Serial USARTs, One with Infrared PWM Support
    Digital Temperature Sensor
    Three 16-Bit Programmable Timers/Counters
    8-Bit, Subsecond, System Timer/Alarm
    Battery-Backed, 32-Bit RTC with Time-of-Day Alarm and Digital Trim
    Programmable Watchdog Timer
♦ Flexible Programming Interface
    Bootloader Simplifies Programming
    In-System Programming Through Debug Port
    Supports In-Application Programming of EEPROM
♦ Power Consumption
    1.9mA at 4.194MHz, 3.6V Operation
    1.9µA Standby Current in Sleep Mode
    Low-Power Divide-by-256 Mode

Applications
    Utility Meters
    Battery-Powered and Portable Devices
    Electrochemical and Optical Sensors
    Industrial Control
    Data-Acquisition
    Systems and Data Loggers
    Home Appliances
    Consumer Electronics
    Thermostats/Humidity Sensors
    Security Sensors
    Gas and Chemical Sensors
    HVAC
    Smart Transmitters

Part Name(s) : AD9868 AD9868BCPZ AD9868BCPZRL ADI
Analog Devices
Description : Broadband Modem MIXED-SIGNAL Front End View

GENERAL DESCRIPTION
The AD9868 is a MIXED-SIGNAL front-end (MxFE®) IC for transceiver applications requiring Tx path and Rx path functionality with data rates up to 80 MSPS. A lower cost, pin compatible version of the AD9865, the AD9868 removes the current amplifier (IAMP) IOUTP functionality and limits the PLL VCO operating range of 80 MHz to 200 MHz.

FEATURES
Low cost 3.3 V CMOS MxFE for broadband modems
10-bit DAC converter
  2×/4× interpolation filter
  200 MSPS DAC update rate
Integrated 17 dBm line driver with 19.5 dB gain control
10-bit, 80 MSPS, ADC converter
−12 dB to +48 dB low noise RxPGA (<3 nV/√Hz)
Third-order, programmable low-pass filter
Flexible digital data path interface
  Half- and full-duplex operation
  Pin compatible with the AD9865
  Various power-down/reduction modes
Internal clock multiplier (PLL)
2 auxiliary programmable clock outputs
Available in a 64-lead LFCSP_VQ

APPLICATIONS
Broadband wireline networking

1

2345678910 Next

All Rights Reserved © datasheetbank.com 2014 - 2020 [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]