datasheetbank_Logo     Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

P/N + Description + Content Search

Search Words :

Part Name(s) : ADV7533 ADV7533BCBZ-RL EVAL-ADV7533-SAZ ADI
Analog Devices
Description : MIPI/DSI Receiver with HDMI Transmitter View

GENERAL DESCRIPTION
The ADV7533 is a multifunction video interface chip. The ADV7533 provides a mobile industry processor interface/display serial interface (MIPI®/DSI) input port, a high definition multimedia interface (HDMI®) data output in a 49-ball wafer level chip scale package (WLCSP). The display serial interface (DSI) input provides up to four lanes of MIPI/DSI data, each running up to 800 Mbps. The DSI Rx implements DSI video mode operation only. The HDMI Tx supports video resolutions using pixel clocks of up to 80 MHz.

Part Name(s) : THC63LVD823 THINE
THine Electronics, Inc.
Description : Single(135MHz)/Dual(170MHz) Link LVDS Transmitter for SXGA/SXGA+/UXGA View

General Description
The THC63LVD823 transmitter is designed to support Single Link transmission between Host and Flat Panel Display up to SXGA+ resolutions and Dual Link transmission between Host and Flat Panel Display up to UXGA resolutions.
   
Features
• Wide dot clock range: 25-135MHz suited for VGA,
    SVGA, XGA, SXGA, SXGA+ and UXGA
• PLL requires No external components
• Supports Dual Link, Dual-in (TTL)/Dual-out
    (LVDS) pixel up to 170MHz dot clock for UXGA
• Supports Single Link, Dual-in (TTL)/Single-out
    (LVDS) pixel up to 135MHz dot clock for SXGA+
• Supports Single Link, Single-in (TTL)/Single-out
    (LVDS) pixel up to 85MHz dot clock for XGA
• Clock edge selectable
• Supports Reduced swing LVDS for Low EMI
• Power down mode
• Low power Single 3.3V CMOS design
• 100pin TQFP
• THC63LVDM83R compatible
   

Part Name(s) : EHS12B1-S EHS16B1-S EHS2B1-S EHS4B1-S EHS8B1-S ERF2110B1 ERF2112B1 ERF2116B1 ERF212B1 ERF214B1 ERF216B1 ERF218B1 ERL2110B1 ERL2116B1 ERL212B1 ERL214B1 ERL216B1 Microsemi
Microsemi Corporation
Description : Single Phase Bridge, 3 Phase Bridge View

Single Phase Bridge, 3 Phase Bridge

Part Name(s) : 2KBP 2KBP005 2KBP02 2KBP04 2KBP06 2KBP08 2KBP10 Vishay
Vishay Semiconductors
Description : Single Phase Rectifier Bridge, 2 A View

DESCRIPTION
A 2 A Single phase encapsulated Bridge rectifier consisting of four Single diodes connected as a full Bridge. They are intended for general applications in industrial and consumer equipment.

FEATURES
• Suitable for printed circuit board mounting
• Compact construction
• High surge current capability
• RoHS compliant


Part Name(s) : LA6559 SANYO
SANYO -> Panasonic
Description : For CD 5-Channel Driver (BTL : Four-Channel, H Bridge : One-Channel) View

Overview
The LA6559 is a 5-Channel driver (BTL : 4-Channel, H Bridge : 1-Channel) for CD players.

Functions
• Power amplifier 5-Channel built-in. (Bridge-connection (BTL) : 4-Channel, H Bridge : 1-Channel)
• IO max 1A
• Level shift circuit built-in (except H Bridge).
• Mute circuit (output ON/OFF) built-in. (Operable with BTL AMP with MUTE1 : CH1 and MUTE2 : CH2 to 4 and not operable for the H Bridge of 3.3VREG)
• 3.3V regulator built-in (external PNP transistor).
• With a function to set the loading output voltage
• Overheat protection circuit (thermal shutdown) built-in.

Part Name(s) : LA6560 SANYO
SANYO -> Panasonic
Description : Monolithic Linear IC For CD Five-Channel Driver (BTL : Four-Channel, H Bridge : One-Channel) View

Overview
The LA6560 is a 5-Channel driver (BTL : 4-Channel, H Bridge : 1-Channel) for CD players.

Functions
•Power amplifier 5-Channel built-in. (Bridge-connection (BTL) : 4-Channel, H Bridge : 1-Channel)
•IOmax 1A
•Level shift circuit built-in (except H Bridge).
•Mute circuit (output ON/OFF) built-in.
  (Operable with BTL AMP and not operable for the H Bridge of 5VREG)
•5V regulator built-in (external PNP transistor).
•With VREF changeover function (H : external, L : internal (2.5V) selected)
•Overheat protection circuit (thermal shutdown) built-in.

Part Name(s) : LA6565VR SANYO
SANYO -> Panasonic
Description : Five-Channel CD Actuator Driver(BTL: 4 Channels, H Bridge: 1 Channel) View

Overview
The LA6565VR is a four-Channel BTL plus one-Channel H Bridge actuator driver developed for use in CD and DVD drives. The BTL driver Channels 1 and 2 include built-in operational amplifiers allowing the LA6565VR to support a wide range of applications.

Functions and Features
•Five power amplifier Channels on a Single chip (Bridge connection (BTL): 4 Channels, H Bridge: 1 Channel)
•IOmax: 1A
•Built-in level shifters (except for the H Bridge Channel)
•Muting circuits (output on/off, two systems)
(The muting circuits operate for the BTL amplifiers. They do not apply to the H Bridge or regulator circuits.)
•Built-in regulator (Uses an external PNP transistor and is set with an external resistor.)
•Output voltage setting function (loading driver)
•Built-in independent operational amplifiers
•Thermal shutdown circuit

Part Name(s) : KBPC8005 KBPC801 KBPC802 KBPC804 KBPC806 KBPC808 KBPC810 KBPC8 Vishay
Vishay Semiconductors
Description : Single Phase Rectifier Bridge, 8 A View

DESCRIPTION
The KBPC series of Single phase rectifier Bridge consists of four silicon junctions connected as a full Bridge. These device are intended for general use in industrial and consumer equipment.

FEATURES
• Suitable for printed circuit board or chasis mounting
• Compact construction
• High surge current capability
• Fully characterised data
• Wide temperature range
• RoHS compliant

Part Name(s) : NTE5340 NTE5342 NTE5344 NTE-Electronic
NTE Electronics
Description : Silicon Bridge Rectifier Single–Phase, 40 Amp View

Silicon Bridge Rectifier Single–Phase, 40 Amp

1

2345678910 Next

All Rights Reserved © datasheetbank.com 2014 - 2020 [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]