P/N + Description + Content Search

[Honeywell]

MICRO SWITCH™ LARGE PREMIUM BASIC SWITCHes

Accurate, reliable, and repeatable, MICRO SWITCH™ BZ/BA/BM/BE Series features precise operating characteristics and enhanced life. These PREMIUM, LARGE snap-action SWITCHes offer precision operation and sensitive differential travel.

Utilizing state-of-the-art manufacturing processes and quality controls, Honeywell has engineered PREMIUM, LARGE snap-action SWITCHes that meet various international agency requirements. Some models have military qualifcations. MICRO SWITCH™ BZ/BA/BM/BE Series are often used for precision on/off applications, as well as end of limit, presence/absence, and manual operator interface functions.

Their engineered design is suitable for various application needs. Confgured options with BZ, BA, BM, and BE SWITCHes provide a wide variety of operating and interface characteristics.

The MICRO SWITCH™ 6AS Series consists of two LARGE PREMIUM BZ/BA/BM/BE snap-action SWITCHes ganged together and actuated by a single actuator. Field adjustable operating point is an option for one or both SWITCHes.

The HC5503PRC is a low cost SLIC optimized for LARGE Telecom SWITCHes. It combines a flexible voltage feed architecture with the Intersil latch-free DI bonded wafer process, to provide a low component count, carrier class solution at very low cost. The re-configurable design permits simple, economical solutions for campus-wide call center and PBX applications. External components can be used in conjunction with the high battery voltage capability to meet the complex impedance and long loop drive requirements of Central Office SWITCHes, worldwide.

Features
• Wide Operating Battery Range (-40V to -58V)
• Single Additional +5V Supply
• 30mA Short Loop Current Limit
• Ring Relay Driver
• SWITCH Hook and Ring Trip Detect
• Low On-Hook Power Consumption
• On-Hook Transmission
• ITU-T Longitudinal Balance Performance
• Loop Power Denial Function
• Thermal Protection
• Supports Tip, Ring or Balanced Ringing Schemes
• Low Profile SO and PLCC Surface Mount Packaging

Applications
• Central Office, PBX, Call Centers
• Related Literature
    - AN571, Using Ring Sync with HC-5502A and HC-5504 SLICs

8.6x4.8x3.0mm Superminiature MICRO SWITCH

FEATURES
> Smaller size than former superminiature MICRO SWITCHes
> Longer operating life than former superminiature MICRO SWITCHes
> THT and SMT terminal type

APPLICATIONS
> Industrial Control
> Notebook
> Joystick
> Computer mouse

Description
The LARGE Digital SWITCH (LDX) is an advanced digital SWITCH allowing the users to build up to 2048 channel non-blocking SWITCH. The serial interface can be at 2, 4 or 8 Mb/s compatible to ST-BUS/MVIP/HMVIP or GCI standards. The LDX can be programmed to provide either minimum or constant throughput delay on all its channels. The device also features three-state control and message mode on per-channel basis.

Features
• 2,048 channel non-blocking SWITCH
• Maintains frame integrity on concatenated channels.
• Per-channel selection of minimum or constant throughput delay
• Serial streams at 2.048, 4.096 or 8.192Mb/s
• Frame offset delay measurement
• Programmable frame delay offset
• Per-channel three-state control
• Per-channel message mode
• Control interface compatible to Intel/Motorola CPUs
• Block programming feature for connection memory
• ST-BUS/MVIP and GCI interfaces
• Test Port compatible to IEEE-1149.1 standard

Applications
• Medium and LARGE SWITCHing platforms
• C.O. SWITCHes
• CTI application
• Voice/data multiplexer
• Digital cross connects
• ST-BUS/HMVIP interface functions

The HC5503PRC is a low cost SLIC optimized for LARGE Telecom SWITCHes. It combines a flexible voltage feed architecture with the Intersil latch-free DI bonded wafer process, to provide a low component count, carrier class solution at very low cost. The re-configurable design permits simple, economical solutions for campus-wide call center and PBX applications. External components can be used in conjunction with the high battery voltage capability to meet the complex impedance and long loop drive requirements of Central Office SWITCHes, worldwide.

Features
• Wide Operating Battery Range (-40V to -58V)
• Single Additional +5V Supply
• 30mA Short Loop Current Limit
• Ring Relay Driver
• SWITCH Hook and Ring Trip Detect
• Low On-Hook Power Consumption
• On-Hook Transmission
• ITU-T Longitudinal Balance Performance
• Loop Power Denial Function
• Thermal Protection
• Supports Tip, Ring or Balanced Ringing Schemes
• Low Profile SO and PLCC Surface Mount Packaging

Applications
• Central Office, PBX, Call Centers
• Related Literature
    - AN571, Using Ring Sync with HC-5502A and HC-5504 SLICs

Product Description
California MICRO Devices CM3512 is a dual channel USB overcurrent power SWITCH that provides 5V power to four independent USB ports. The device has two power SWITCHes that provide the VBUS voltage at each USB output port with minimal voltage drop.

Features
• Dual SWITCHes, each with independent over-current protection and flag indicator, for 4 USB ports
• Two active low Enable controls, one per output
• Up to 1.2A continuous current each output
• Over-current limits at 1.2A min
• 10msec min fault blanking delay on OC# outputs prevents false overcurrent alarms
• Prevents backdrive current when host powered off
• Low operating current (95ΜA typ.)
• Low quiescent current when disabled (<1&MICRO;A max)
• Small 8-Lead SOIC package

Applications
• PC’s, Notebooks, STBs

Description
The MT90820 LARGE Digital SWITCH has a non-blocking SWITCH capacity of 2,048 x 2,048 channels at a serial bit rate of 8.192 Mb/s, 1,024 x 1,024 channels at 4.096 Mb/s and 512 x 512 channels at 2.048 Mb/s. The device has many features that are programmable on per stream or per channel basis, including message mode, input offset delay and high impedance output control.

Features
• 2,048 × 2,048 channel non-blocking SWITCHing at 8.192 Mb/s
• Per-channel variable or constant throughput delay
• Automatic identification of ST-BUS/GCI interfaces
• Accept ST-BUS streams of 2.048 Mb/s, 4.096 Mb/s or 8.192 Mb/s
• Automatic frame offset delay measurement
• Per-stream frame delay offset programming
• Per-channel high impedance output control
• Per-channel message mode
• Control interface compatible to Motorola non-mulitplexed CPUs
• Connection memory block programming
• IEEE-1149.1 (JTAG) Test Port

Applications
• Medium and LARGE SWITCHing platforms
• CTI application
• Voice/data multiplexer
• Digital cross connects
• ST-BUS/GCI interface functions
• Support IEEE 802.9a standard

Description
The SMP1352 series of plastic packaged, surface mountable, low capacitance (0.3 pF) silicon PIN diodes are designed for LARGE signal SWITCH applications from 10 MHz to beyond 2 GHz. These diodes have a reverse voltage rating of 200 V and are designed for use in low distortion SWITCHes that are required to hold off LARGE RF voltages.The nominal 50 µm I region width, combined with the typical 1.5 µS carrier lifetime, results in a PIN diode with low forward resistance and low distortion characteristics.

Features
■ Designed for LARGE Signal SWITCHes
■ Frequency Range from HF to > 2 GHz
■ Base Station and Handset Applications
■ Industry Standard Surface Mount Packages
■ Designed for High Volume Applications
■ Available in Tape and Reel Packaging

DESCRIPTION
The TSU5611 is designed to interface the cellular phone UART, USB, and audio chips with external peripherals via a MICRO-USB connector. The SWITCH features impedance detection for identification of various accessories that are attached through DP and DM of the MICRO-USB port. When an accessory is plugged into the MICRO-USB port, the SWITCH uses a detection mechanism to identify the accessory (see the State Machine for details). It will then SWITCH to the appropriate channel—data, audio, or UART.

FEATURES
• Compatible Accessories
– USB Data Cable
– UART Cable
– Charger (Dedicated Charger or Host/Hub Charger)
– Stereo Headset With Mic
• Integrated LDOs for VREF and Mic Bias
• USB and UART Path Supports USB 2.0 High Speed
• Audio Path Provides Negative Rail Support and Click/Pop Reduction
• Supports Factory Test Mode
• 1.8-V Compatible I2C Interface
• ESD Performance Tested Per JESD 22
– 1500-V Human-Body Model (A114-B, Class II)
– 1000-V Charged-Device Model (C101)

Reliable BASIC SWITCH with External Lever

• Available by 0.1 A, 6 A, 11 A, 16 A and 21 A models, all with
   self-cleaning contacts. 0.1 A utilizes gold alloy crossbar
   contacts for high reliability at low loads.
• Available with internally or externally fitted levers, and 2 fixing
   positions for external levers.
• Conforms to EN61058-1 UL1054.
• High Temperature models rated up to 200°C (D3V-6, D3V-01)
   and 155°C (D3V-11) are available.
• RoHS Compliant.