datasheetbank_Logo    Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site
Part Name  

P/N + Description + Content Search

Search Words :

Part Name(s) : MC12009 MC12009P MC12011 MC12011P MC12013 MC12013P Motorola
Motorola => Freescale
Description : MECL PLL COMPONENTS DUAL MODULUS PRESCALER

DUAL MODULUS PRESCALER
   
These devices are two–MODULUS PRESCALERs which will divide by 5 and 6, 8 and 9, and 10 and 11, respectively. A MECL–to–MTTL translator is provided to interface directly with the MC12014 Counter Control Logic. In addition, there is a buffered clock input and MECL bias voltage source.

•MC12009 480 MHz (5/6), MC12011 550 MHz (8/9), MC12013 550 MHz (10/11)
MECL to MTTL Translator on Chip
MECL and MTTL Enable Inputs
•5.0 or –5.2 V Operation*
•Buffered Clock Input — Series Input RC Typ, 20 Ohms and 4 pF
•VBBReference Voltage
•310 Milliwatts (Typ)

View
Part Name(s) : MC12009D MC12009P MC12011D MC12011P ML12009 ML12009-5P ML12009EP ML12011 ML12011-5P ML12011EP LANSDALE
LANSDALE Semiconductor Inc.
Description : MECL PLL COMPONENTS DUAL MODULUS PRESCALER

Legacy Device:Motorola MC12009, MC12011

These devices are two–MODULUS PRESCALERs which will divide by 5 and 6, 8 and 9, respectively. A MECL–to–MTTL translator is provided to interface directly with the Motorola MC12014 Counter Control Logic. In addition, there is a buffered clock input and MECL bias voltage source.

• ML12009 480 MHz (÷5/6), ML12011 550 MHz (÷8/9)
MECL to MTTL Translator on Chip
MECL and MTTL Enable Inputs
• 5.0 or –5.2 V Operation*
• Buffered Clock Input — Series Input RC Typ, 20 Ωand 4.0 pF
• VBB Reference Voltage
• 310 mW (Typ)

View
Part Name(s) : MC12022TSA MC12022TSAD MC12022TSAP MC12022TSB MC12022TSBD MC12022TSBP Motorola
Motorola => Freescale
Description : MECL PLL COMPONENTS ÷64/65, ÷128/129 DUAL MODULUS PRESCALER

The MC12022TSA can be used with CMOS synthesizers requiring positive edges to trigger internal counters such as Motorola’s MC145XXX series in a PLL to provide tuning signals up to 1.1GHz in programmable frequency steps. This device is a reduced current drain version of the MC12022A/B with the addition of on–chip output termination.
The MC12022TSB can be used with CMOS synthesizers requiring negative edges to trigger internal counters.
A Divide Ratio Control (SW) permits selection of a 64/65 or 128/129 divide ratio as desired.
The MODULUS Control (MC) selects the proper divide number after SW has been biased to select the desired divide ratio.
NOTE: The “B” Version Is Not Recommended for New Designs

• 1.1 GHz Toggle Frequency
• Supply Voltage of 4.5 to 5.5V
• Low–Power 4.0mA Typical
• Operating Temperature Range of –40 to +85°C
• Short Setup Time (tset) 16ns Maximum @ 1.1GHz
MODULUS Control Input Level Is Compatible With Standard CMOS and TTL
• Output Load Resistor on Die

View
Part Name(s) : MC12018 MC12018D MC12018P Motorola
Motorola => Freescale
Description : 520MHz DUAL MODULUS PRESCALER

MECL PLL COMPONENTS ÷128/129 DUAL MODULUS PRESCALER

The MC12018 is a DUAL MODULUS PRESCALER which divides by 128 and 129. An internal regulator is provided to allow this device to be used over a wide range of power supply voltages. The devices may be operated by applying a supply voltage of 5.0 Vdc ±10% at Pin 7, or by applying an unregulated voltage source from 5.5 Vdc to 9.5 Vdc to Pin 8.

• 520 MHz Toggle Frequency
• Low–Power 8.0 mA Typical
• Control Input Is Compatible With Standard CMOS and TTL
• Supply Voltage 4.5 V to 9.5 V
• On–Chip 10 kΩ Resistor from Positive Edge to Ground

View
Part Name(s) : MC12015 MC12015P MC12016 MC12016D MC12016P MC12017 MC12017D MC12017P Motorola
Motorola => Freescale
Description : DUAL MODULUS PRESCALER

MECL PLL COMPONENTS DUAL MODULUS PRESCALER

The MC12015, MC12016 and MC12017 are DUAL MODULUS PRESCALERs which will drive divide by 32 and 33, 40 and 41, and 64 and 65, respectively. An internal regulator is provided to allow these devices to be used over a wide range of power–supply voltages. The devices may be operated by
applying a supply voltage of 5.0 Vdc ±10% at Pin 7, or by applying an unregulated voltage source from 5.5Vdc to 9.5 Vdc to Pin 8.


•225 MHz Toggle Frequency
•Low–Power 7.5 mA Maximum at 6.8 V
•Control Input and Output Are Compatible With Standard CMOS
•Connecting Pins 2 and 3 Allows Driving One TTL Load
•Supply Voltage 4.5 V to 9.5 V

View
Part Name(s) : MC12022A MC12022AD MC12022AP MC12022B MC12022BD MC12022BP Motorola
Motorola => Freescale
Description : 1.1GHz DUAL MODULUS PRESCALER

MECL PLL COMPONENTS ÷64/65, ÷128/129 DUAL MODULUS PRESCALER

The MC12022A can be used with CMOS synthesizers requiring positive edges to trigger internal counters such as Motorola’s MC145XXX series in a PLL to provide tuning signals up to 1.1GHz in programmable frequency steps.
The MC12022B can be used with CMOS synthesizers requiring negative edges to trigger internal counters.
A Divide Ratio Control (SW) permits selection of a 64/65 or 128/129 divide ratio as desired. The MODULUS Control (MC) selects the proper divide number after SW has been biased to select the desired divide ratio.

• 1.1 GHz Toggle Frequency
• Supply Voltage of 4.5 to 5.5 V
• Low–Power 7.5 mA Typical
• Operating Temperature Range of –40 to +85°C
• Short Setup Time (tset) 16ns Maximum @ 1.1 GHz
MODULUS Control Input Level Is Compatible With Standard CMOS and TTL. Maximum Input Voltage Should Be Limited to 6.5 Vdc

View
Part Name(s) : MC12026A MC12026B MC12026AD MC12026BD MC12026AP MC12026BP Motorola
Motorola => Freescale
Description : 1.1GHz DUAL MODULUS PRESCALER

1.1GHz DUAL MODULUS PRESCALER

The MC12026 is a high frequency, low voltage DUAL MODULUS PRESCALER used in phase–locked loop (PLL) applications.
The MC12026A can be used with CMOS synthesizers requiring positive edges to trigger internal counters such as Motorola’s MC145xxx series in a PLL to provide tuning signals up to 1.1GHz in programmable frequency steps.
The MC12026B can be used with CMOS synthesizers requiring negative edges to trigger internal counters.
A Divide Ratio Control (SW) permits selection of an 8/9 or 16/17 divide ratio as desired.
The MODULUS Control (MC) selects the proper divide number after SW has been biased to select the desired divide ratio.
NOTE: The “B” Version Is Not Recommended for New Designs

• 1.1GHz Toggle Frequency
• Supply Voltage 4.5V to 5.5V
• Low Power 4.0mA Typical
• Operating Temperature Range of –40°C to +85°C
• The MC12026 is Pin Compatible With the MC12022
• Short Setup Time (tset ) 6ns Typical @ 1.1GHz
MODULUS Control Input Level is Compatible With Standard CMOS and TTL

View
Part Name(s) : MC12079 MC12079D MC12079P Motorola
Motorola => Freescale
Description : MECL PLL COMPONENTS ÷64/128/256 PRESCALER

2.8 GHz PRESCALER

The MC12079 is a single MODULUS divide by 64, 128, 256 PRESCALER for low power frequency division of a 2.8 GHz (typical) high frequency input signal. Divide ratio control inputs SW1 and SW2 select the required divide ratio of ÷64, ÷128, or ÷256.
An external load resistor is required to terminate the output. A 1.2 kΩ
resistor is recommended to achieve a 1.6 Vpp output swing, when dividing a 1.1 GHz input signal by the minimum divide ratio of 64, assuming a 12 pF load. Output current can be minimized dependent on conditions such as output frequency, capacitive load being driven, and output voltage swing required. Typical values for load resistors are included in the Vout specification for various divide ratios at 2.8 GHz input frequency.

• 2.8 GHz Toggle Frequency
• Supply Voltage 4.5 to 5.5 V
• Low Power 9mA Typical at VCC = 5.0 V
• Operating Temperature Range of –40 to 85°C

View
Part Name(s) : MC12079 MC12079D MC12079P TI
Texas Instruments
Description : MECL PLL COMPONENTS ÷64/128/256 PRESCALER

2.8 GHz PRESCALER

The MC12079 is a single MODULUS divide by 64, 128, 256 PRESCALER for low power frequency division of a 2.8 GHz (typical) high frequency input signal. Divide ratio control inputs SW1 and SW2 select the required divide ratio of ÷64, ÷128, or ÷256.
An external load resistor is required to terminate the output. A 1.2 kΩ
resistor is recommended to achieve a 1.6 Vpp output swing, when dividing a 1.1 GHz input signal by the minimum divide ratio of 64, assuming a 12 pF load. Output current can be minimized dependent on conditions such as output frequency, capacitive load being driven, and output voltage swing required. Typical values for load resistors are included in the Vout specification for various divide ratios at 2.8 GHz input frequency.

• 2.8 GHz Toggle Frequency
• Supply Voltage 4.5 to 5.5 V
• Low Power 9mA Typical at VCC = 5.0 V
• Operating Temperature Range of –40 to 85°C

View
Part Name(s) : MC12079D MC12079P ML12079 ML12079-5P ML12079PP LANSDALE
LANSDALE Semiconductor Inc.
Description : 2.8 GHz PRESCALER MECL PLL COMPONENTS ÷64/128/256 PRESCALER

The ML12079 is a single MODULUS divide by 64, 128, 256 PRESCALER for low power frequency division of a 2.8 GHz (typical) high frequency input signal. Divide ratio control inputs SW1 and SW2 select the required divide ratio of ÷64, ÷128, or ÷256.
An external load resistor is required to terminate the output. A 1.2 kΩ resistor is recommended to achieve a 1.6 V pp output swing, when dividing a 1.1 GHz input signal by the minimum divide ratio of 64, assuming a 12 pF load. Output current can be minimized dependent on conditions such as output frequency, capacitive load being driven, and output voltage swing required. Typical values for load resistors are included in the Vout specification for various divide ratios at 2.8 GHz input frequency.

• 2.8 GHz Toggle Frequency
• Supply Voltage 4.5 to 5.5 V
• Low Supply Current 9mA Typical at VCC = 5.0 V
• Operating Temperature Range of TA = –40 to 85°C

 

View

1

2345678910 Next

 

All Rights Reserved © datasheetbank.com 2014 - 2019 [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]