datasheetbank_Logo     Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

P/N + Description + Content Search

Search Words :

Part Name(s) : TMP108 TMP108AIYFFR TMP108AIYFFT TI
Texas Instruments
Description : LOW POWER DIGITAL TEMPERATURE SENSOR WITH TWO-WIRE SERIAL INTERFACE IN WCSP View

DESCRIPTION
TMP108 is a DIGITAL-output TEMPERATURE SENSOR WITH a dynamically-programmable limit wINdow, and underand overTEMPERATURE alert functions. These features provide optimized TEMPERATURE control WITHout the need of frequent TEMPERATURE readINgs by the controller or application processor.

FEATURES
• Dynamically-Programmable Limit WINdow WITH Under- and OverTEMPERATURE Alerts
• Accuracy: ±0.75°C (max) from –20°C to +85°C ±1°C (max) from –40°C to +125°C
LOW Quiescent Current: 6 μA Active (max) from –40°C to +125°C
• Supply Range: 1.4 V to 3.6 V
• Resolution: 12 Bits (0.0625°C)
• Package: 1.2-mm × 0.8-mm, 6-Ball WCSP

APPLICATIONS
• Smartphone and Tablet Thermal Management
• Battery Management
• Thermostat Control
• Under- and OverTEMPERATURE Protection
• Environmental MonitorINg and HVAC

Part Name(s) : TMP103 TMP103AYFFR TMP103AYFFT TMP103BYFFR TMP103BYFFT TMP103CYFFR TMP103CYFFT TMP103DYFFR TMP103DYFFT TMP103EYFFR TMP103EYFFT TMP103FYFFR TMP103FYFFT TMP103GYFFR TMP103GYFFT TMP103HYFFR TMP103HYFFT TI
Texas Instruments
Description : LOW-POWER, DIGITAL TEMPERATURE SENSOR WITH TWO-WIRE INTERFACE IN WCSP View

Description
The TMP103 is a DIGITAL output TEMPERATURE SENSOR IN a four-ball wafer chip-scale package (WCSP). The TMP103 is capable of readINg TEMPERATUREs to a resolution of 1°C.
The TMP103 features a TWO-WIRE INTERFACE that is compatible WITH both I2C and SMBus INTERFACEs. IN addition, the INTERFACE supports multiple device access (MDA) commands that alLOW the master to communicate WITH multiple devices on the bus simultaneously, elimINatINg the need to send INdividual commands to each TMP103 on the bus. Up to eight TMP103s can be tied together IN parallel and easily read by the host. The TMP103 is especially suitable for space-constraINed, POWER sensitive applications WITH multiple TEMPERATURE measurement zones that must be monitored.
The TMP103 is specified for operation over a TEMPERATURE range of –40°C to 125°C.

Features
• Multiple Device Access (MDA):
   – Global Read/Write Operations
• I2C™ and SMBus™-Compatible INTERFACE
• Resolution: 8 Bits
• Accuracy: ±1°C Typical (–10°C to 100°C)
LOW Quiescent Current:
   – 3-μA Active IQ at 0.25 Hz
   – 1-μA Shutdown
• Supply Range: 1.4 V to 3.6 V
DIGITAL Output
• 4-Ball WCSP (DSBGA) Package

Applications
• Handsets
• Notebooks
• SSDs
• Servers
• Telecom
• Set Top Boxes
LOW POWER Environmental
SENSORs

 

Part Name(s) : TMP104 TMP104YFFR TMP104YFFT TI
Texas Instruments
Description : LOW-POWER, DIGITAL TEMPERATURE SENSOR WITH SMAART Wire INTERFACE View

DESCRIPTION
The TMP104 is a DIGITAL output TEMPERATURE SENSOR IN a four-ball wafer chip-scale package (WCSP). The TMP104 is capable of readINg TEMPERATUREs to a resolution of 1°C.
The TMP104 features a SMAART wire INTERFACE that supports daisy-chaIN configurations. IN addition, the INTERFACE supports multiple device access (MDA) commands that alLOW the master to communicate WITH multiple devices on the bus simultaneously, elimINatINg the need to send INdividual commands to each TMP104 on the bus.

FEATURES
• Multiple Device Access (MDA):
   – Global Read/Write Operations
• SMAART Wire INTERFACE
• Resolution: 8 Bits
• Accuracy: ±0.5°C Typ (–10°C to +100°C)
LOW Quiescent Current:
   – 3 μA Active IQ at 0.25 Hz
   – 1 μA Shutdown
• Supply Range: 1.4 V to 3.6 V
DIGITAL Output
• Package: 0.8-mm (±5%) × 1-mm (±5%) 4-Ball WCSP (DSBGA)

APPLICATIONS
• Handsets
• Notebooks

 

Part Name(s) : TMP102 TMP102AIDRLR TMP102AIDRLT BB
Burr-Brown -> Texas Instruments
Description : LOW POWER DIGITAL TEMPERATURE SENSOR WITH SMBus?/TWO-WIRE SERIAL INTERFACE IN SOT563 View

DESCRIPTION
The TMP102 is a TWO-WIRE, SERIAL output TEMPERATURE SENSOR available IN a tINy SOT563 package. RequirINg no external components, the TMP102 is capable of readINg TEMPERATUREs to a resolution of 0.0625°C.

FEATURES
• TINY SOT563 PACKAGE
• ACCURACY: 0.5°C (–25°C to +85°C)
LOW QUIESCENT CURRENT: 10μA Active (max) 1μA Shutdown (max)
• SUPPLY RANGE: 1.4V to 3.6V
• RESOLUTION: 12 Bits
DIGITAL OUTPUT: TWO-WIRE SERIAL INTERFACE

APPLICATIONS
• PORTABLE AND BATTERY-POWERED APPLICATIONS
POWER-SUPPLY TEMPERATURE MONITORING
• COMPUTER PERIPHERAL THERMAL PROTECTION
• NOTEBOOK COMPUTERS
• BATTERY MANAGEMENT
• OFFICE MACHINES
• THERMOSTAT CONTROLS
• ELECTROMECHANICAL DEVICE TEMPERATURES
• GENERAL TEMPERATURE MEASUREMENTS: INdustrial Controls Test Equipment Medical INstrumentations


Part Name(s) : TMP102 HPA00330AIDRLR HPA00330AIDRLRG4 TMP102AIDRLR TMP102AIDRLRG4 TMP102AIDRLT TMP102AIDRLTG4 TI
Texas Instruments
Description : LOW-POWER DIGITAL TEMPERATURE SENSOR WITH SMBus and TWO-WIRE SERIAL INTERFACE IN SOT563 View

Description
The TMP102 device is a DIGITAL TEMPERATURE SENSOR ideal for NTC/PTC thermistor replacement where high accuracy is required. The device offers an accuracy of ±0.5°C WITHout requirINg calibration or external component signal conditionINg. Device TEMPERATURE SENSORs are highly lINear and do not require complex calculations or lookup tables to derive the TEMPERATURE. The on-chip 12-bit ADC offers resolutions down to 0.0625°C.

Features
• SOT563 Package (1.6-mm × 1.6-mm) is a 68% Smaller FootprINt than SOT-23
• Accuracy WITHout Calibration:
    – 2.0°C (max) from –25°C to 85°C
    – 3.0°C (max) from –40°C to 125°C
LOW Quiescent Current:
    – 10-μA Active (max)
    – 1-μA Shutdown (max)
• Supply Range: 1.4 to 3.6 V
• Resolution: 12 Bits
DIGITAL Output: SMBus™, TWO-WIRE, and I2C INTERFACE Compatibility
• NIST Traceable

Applications
• Portable and Battery-POWERed Applications
POWER-supply TEMPERATURE MonitorINg
• Computer Peripheral Thermal Protection
• Notebook Computers
• Battery Management
• Office MachINes
• Thermostat Controls
• Electromechanical Device TEMPERATUREs
• General TEMPERATURE Measurements:
    – INdustrial Controls
    – Test Equipment
    – Medical INstrumentations

Part Name(s) : TMP102 HPA00330AIDRLR HPA00330AIDRLRG4 TMP102AIDRLR TMP102AIDRLRG4 TMP102AIDRLT TMP102AIDRLTG4 Texas-Instruments
Texas Instruments
Description : LOW-POWER DIGITAL TEMPERATURE SENSOR WITH SMBus and TWO-WIRE SERIAL INTERFACE IN SOT563 View

Description
The TMP102 device is a DIGITAL TEMPERATURE SENSOR ideal for NTC/PTC thermistor replacement where high accuracy is required. The device offers an accuracy of ±0.5°C WITHout requirINg calibration or external component signal conditionINg. Device TEMPERATURE SENSORs are highly lINear and do not require complex calculations or lookup tables to derive the TEMPERATURE. The on-chip 12-bit ADC offers resolutions down to 0.0625°C.

Features
• SOT563 Package (1.6-mm × 1.6-mm) is a 68% Smaller FootprINt than SOT-23
• Accuracy WITHout Calibration:
    – 2.0°C (max) from –25°C to 85°C
    – 3.0°C (max) from –40°C to 125°C
LOW Quiescent Current:
    – 10-μA Active (max)
    – 1-μA Shutdown (max)
• Supply Range: 1.4 to 3.6 V
• Resolution: 12 Bits
DIGITAL Output: SMBus, TWO-WIRE, and I2C INTERFACE Compatibility
• NIST Traceable

Applications
• Portable and Battery-POWERed Applications
POWER-supply TEMPERATURE MonitorINg
• Computer Peripheral Thermal Protection
• Notebook Computers
• Battery Management
• Office MachINes
• Thermostat Controls
• Electromechanical Device TEMPERATUREs
• General TEMPERATURE Measurements:
    – INdustrial Controls
    – Test Equipment
    – Medical INstrumentations

Part Name(s) : LM90 LM90CIMM LM90CIMMX National-Semiconductor
National ->Texas Instruments
Description : 3?C Accurate, Remote Diode and Local DIGITAL TEMPERATURE SENSOR WITH TWO-WIRE INTERFACE View

General Description
The LM90 is an 11-bit DIGITAL TEMPERATURE SENSOR WITH a 2-wire System Management Bus (SMBus) SERIAL INTERFACE. The LM90 accurately measures its own TEMPERATURE as well as the TEMPERATURE of an external device, such as processor thermal diode or diode connected transistor such as the 2N3904. The TEMPERATURE of any ASIC can be accurately determINed usINg the LM90 as long as a dedicated diode (semiconductor junction) is available on the target die.

Part Name(s) : ASC7511 ASC7511D8 ASC7511M8 ETC2
Unspecified
Description : LOW-VOLTAGE 2-WIRE DIGITAL TEMPERATURE SENSOR WITH THERMAL ALARM View

[Andigilog, INc.]

Product Description
The aSC7511 is a high-precision CMOS TEMPERATURE SENSOR WITH SMBus compatible SERIAL DIGITAL INTERFACE, INtended for use IN PC thermal management applications. The aSC7511 can measure TEMPERATURE of a remote thermal diode to an accuracy of ±1°C. INternal TEMPERATURE can be measured to ±3°C.

Features
• Local and remote TEMPERATURE SENSORs
• 0.25°C resolution, ±1°C accuracy on remote diode
• 1°C resolution, ±3°C accuracy on local SENSOR
• Extended TEMPERATURE measurement range 0°C to +127°C (default) or –55°C to +150°C
• 2-wire SMBus SERIAL INTERFACE WITH SMBus alert
• Programmable over / under TEMPERATURE limits
• Offset registers for system calibration
• One or two over-TEMPERATURE fail-safe THERM outputs
• 8-lead, Pb-free, SOIC (SOP) or MSOP package

Applications
    Desktop Computers – Motherboards and Graphics Cards
    Laptop Computers

Part Name(s) : MAX6575H MAX6575HZUT MAX6575L MAX6575LZUT MAX6575HZUT-T MaximIC
Maxim Integrated
Description : SOT TEMPERATURE SENSOR WITH Multidrop SINgle-Wire DIGITAL INTERFACE View

General Description
The MAX6575L/H is a LOW-cost, LOW-current TEMPERATURE SENSOR WITH a sINgle-wire DIGITAL INTERFACE. It features accuracy of ±3°C at +25°C, ±4.5°C at +85°C, and ±5°C at +125°C. The MAX6575L/H is a monostable, externally triggered TEMPERATURE SENSOR that alLOWs a microprocessor (µP) to INTERFACE WITH up to eight TEMPERATURE SENSORs usINg a sINgle control lINe. TEMPERATUREs are sensed by measurINg the time delay between the fallINg edge of the external triggerINg pulse and the fallINg edge of the subsequent pulse delays reported from the devices. Different SENSORs on the same I/O lINe use different timeout multipliers to avoid overlappINg signals.

Features
♦ Simple SINgle-Wire INTERFACE to µP or µC
♦ Multidrop up to Eight SENSORs on One Wire
♦ ±0.8°C Accuracy at +25°C (±3°C max)
♦ Operates from +2.7V to +5.5V Supply Voltage
LOW 150µA (typ) Supply Current
♦ Standard OperatINg TEMPERATURE Range: -40°C to +125°C
♦ Small 6-PIN SOT23 Package

1

2345678910 Next

All Rights Reserved © datasheetbank.com 2014 - 2020 [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]