datasheetbank_Logo    Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site
Part Name  

P/N + Description + Content Search

Search Words :

Part Name(s) : TLE2074Y TI
Texas Instruments
Description : EXCALIBUR LOW-NOISE HIGH-SPEED JFET-INPUT OPERATIONAL AMPLIFIERS

description
The TLE207x series of JFET-input OPERATIONAL AMPLIFIERS more than double the bandwidth and triple the slew rate of the TL07x and TL08x families of BiFET OPERATIONAL AMPLIFIERS. Texas Instruments Excalibur process yields a typical NOISE floor of 11.6 nV/√Hz, 17-nV/√Hz ensured maximum, offering immediate improvement in NOISE-sensitive circuits designed using the TL07x. The TLE207x also has wider supply voltage rails, increasing the dynamic signal range for BiFET circuits to ±19 V. On-chip zener trimming of offset voltage yields PRECISION grades for greater accuracy in dc-coupled applications. The TLE207x are pin-compatible with LOWer performance BiFET OPERATIONAL AMPLIFIERS for ease in improving performance in existing designs.

● Direct Upgrades to TL05x, TL07x, and TL08x BiFET OPERATIONAL AMPLIFIERS
● Greater Than 2× Bandwidth (10 MHz) and 3× Slew Rate (45 V/µs) Than TL07x
● Ensured Maximum NOISE Floor 17 nV/√Hz
● On-Chip Offset Voltage Trimming for Improved DC Performance
● Wider Supply Rails Increase Dynamic Signal Range to ±19 V

View
Part Name(s) : TLE2142Y TLE2142MP TI
Texas Instruments
Description : EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION DUAL OPERATIONAL AMPLIFIERS

description
The TLE2142 and TLE2142A devices are HIGH-performance internally-compensated OPERATIONAL AMPLIFIERS built using Texas Instruments complementary bipolar Excalibur process. The TLE2142A is a tighter offset voltage grade of the TLE2142. Both are pin-compatible upgrades to standard industry products.

LOW NOISE
   10 Hz . . . 15 nV/√Hz
   1 kHz . . . 10.5 nV/√Hz
• 10000-pF Load Capability
• 20-mA Min Short-Circuit Output Current
• 27-V/µs Min Slew Rate
HIGH Gain-Bandwidth Product . . . 5.9 MHz
LOW VIO . . . 750 µV Max at 25°C
• Single or Split Supply
• Fast Settling Time
   340 ns to 0.1%
   400 ns to 0.01%
• Saturation Recovery . . . 150 ns
• Large Output Swing
   VCC– +0.1 V to VCC+ – 1 V

View
Part Name(s) : JM38510/13503BPA JM38510/13506BPA M38510/13503BPA M38510/13506BPA OP27 OP27A OP27AFK OP27AFKB OP27AJG OP27AJGB OP27C OP27CFK OP27CJG OP27CJGB TI
Texas Instruments
Description : LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS

description
The OP27 OPERATIONAL AMPLIFIERS combine out standing NOISE performance with excellent PRECISION and HIGH-SPEED specifications. The wideband NOISE is only 3 nV/√Hz and with the 1/f NOISE corner at 2.7 Hz, LOW NOISE is maintained for all LOW-frequency applications.
The outstanding characteristics of the OP27 make these devices excellent choices for LOW-NOISE amplifier applications requiring PRECISION performance and reliability.
The OP27 series is compensated for unity gain. The OP27A and OP27C are characterized for operation over the full military temperature range of −55°C to 125°C.

• Replacements for ADI, PMI and LTC OP27 Series
   Features of OP27A and OP27C:
• Maximum Equivalent Input NOISE Voltage:
   3.8 nV/√Hz at 1 kHz
   5.5 nV/√Hz at 10 kHz
• Very LOW Peak-to-Peak NOISE Voltage at
   0.1 Hz to 10 Hz . . . 80 nV Typ
LOW Input Offset Voltage
   OP27A . . . 25 μV Max
   OP27C . . . 100 μV Max
HIGH Voltage Amplification
   OP27A . . . 1 V/μV Min
   OP27C . . . 0.7 V/μV Min

View
Part Name(s) : OP27AP OP27CP OP27E OP27EFK OP27EJG OP27EP OP27G OP27GFK OP27GJG OP27GP OP37A OP37AFK OP37AJG OP37AP OP37C OP37CFK OP37CJG OP37CP OP37E OP37EFK OP37EJG OP37EP OP37G OP37GFK OP37GJG TI
Texas Instruments
Description : LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS

description
The OP27 and OP37 OPERATIONAL AMPLIFIERS combine outstanding NOISE performance with
excellent PRECISION and HIGH-SPEED specifications. The wideband NOISE is only 3 nV/√Hzand with the 1/f NOISE corner at 2.7 Hz, LOW NOISE is maintained for all LOW-frequency applications.
The outstanding characteristics of the OP27 and OP37 make these devices excellent choices for LOW-NOISE amplifier applications requiring PRECISION performance and reliability. Additionally,
the OP37 is free of latch-up in HIGH-gain, large-capacitive-feedback configurations.

•Direct Replacements for PMI and LTC OP27 and OP37 Series

Features of OP27A, OP27C, OP37A, and OP37C:
•Maximum Equivalent Input NOISE Voltage:
  3.8 nV/√Hzat 1 kHz
  5.5 nV/√Hzat 10 kHz
•Very LOW Peak-to-Peak NOISE Voltage at
  0.1 Hz to 10 Hz . . . 80 nV Typ
LOW Input Offset Voltage ...25 µV Max
HIGH Voltage Amplification ...1 V/µV Min

Feature of OP37 Series:
•Minimum Slew Rate ...11 V/µs

 

View
Part Name(s) : TLE2141AMD TLE2141AMP TLE2141MJB TLE2141MP TI
Texas Instruments
Description : EXCALIBUR LOW NOISE HIGH SPEED PRECISION OPERATIONAL AMPLIFIERS

description
The TLE2141 and TLE2141A devices are HIGH-performance, internally compensated OPERATIONAL AMPLIFIERS built using Texas Instruments complementary bipolar Excalibur process. The TLE2141A is a tighter offset voltage grade of the TLE2141. Both are pin-compatible upgrades to standard industry products.

LOW NOISE
   10 Hz . . . 15 nV/√Hz
   1 kHz . . . 10.5 nV/√Hz
• 10000-pF Load Capability
• 20-mA Min Short-Circuit Output Current
• 27-V/µs Min Slew Rate
HIGH Gain-Bandwidth Product . . . 5.9 MHz
LOW VIO . . . 500 µV Max at 25°C
• Single or Split Supply . . . 4 V to 44 V
• Fast Settling Time
   340 ns to 0.1%
   400 ns to 0.01%
• Saturation Recovery . . . 150 ns
• Large Output Swing VCC– +0.1 V to VCC+ – 1 V

 

View
Part Name(s) : LT1007 LT1007A LT1007ACP LT1007AMJG LT1007AMP LT1007CDW LT1007CDWR LT1007CP LT1007MJG LT1007MP LT1037 LT1037A LT1037ACP LT1037AMJG LT1037AMP LT1037CDW LT1037CDWR LT1037CP LT1037MJG LT1037MP TI
Texas Instruments
Description : LOW-NOISE, HIGH-SPEED, PRECISION OPERATIONAL AMPLIFIERS

description
These monolithic OPERATIONAL AMPLIFIERS feature extremely LOW-NOISE performance and out
standing PRECISION and SPEED specifications.The typical differential voltage amplification (at TA= 25°C) of these devices is an extremely HIGH 20 V/µV driving a 2-kΩload to ±12 V and 12 V/µV driving, a 600-Ωload to ±10V.
In the design, processing, and testing of the device, particular attention has been paid to the optimization of the entire distribution of several key parameters. Consequently, the specifications of even the LOWest-cost grades (the LT1007C and the LT1037C) have been greatly improved compared to equivalent grades of competing AMPLIFIERS.

•Maximum Equivalent Input NOISE Voltage:
  3.8 nV/√Hzat 1 kHz
  4.5 nV/√Hzat 10 Hz
LOW Peak-to-Peak Equivalent Input NOISE Voltage: 60 nV Typ From 0.1 Hz to 10 Hz
•Slew Rate (LT1037 and LT1037A): 11 V/µs Min
LT1007A and LT1037A Specifications:
HIGH Voltage Amplification:
  7 V/µV Min, RL= 2 kΩ
  3 V/µV Min, RL= 600 Ω
LOW Input Offset Voltage: 25 µV Max
LOW Input Offset Voltage Temperature Coefficient: 0.6 µV/°C Max
•Common-Mode Rejection Ratio: 117 dB Min

View
Part Name(s) : 5962-9460201QHA 5962-9460203QDA TLE2071ACDRG4 TLE2071AIPE4 TLE2071IPE4 TLE2071MUB TLE2074MWB TI
Texas Instruments
Description : EXCALIBUR LOW-NOISE HIGH-SPEED JFET-INPUT OPERATIONAL AMPLIFIERS

description
The TLE207x series of JFET-input OPERATIONAL AMPLIFIERS more than double the bandwidth and triple the slew rate of the TL07x and TL08x families of BiFET OPERATIONAL AMPLIFIERS. Texas Instruments Excalibur process yields a typical NOISE floor of 11.6 nV/√Hz, 17-nV/√Hz ensured maximum, offering immediate improvement in NOISE-sensitive circuits designed using the TL07x. The TLE207x also has wider supply voltage rails, increasing the dynamic signal range for BiFET circuits to ±19 V. On-chip zener trimming of offset voltage yields PRECISION grades for greater accuracy in dc-coupled applications. The TLE207x are pin-compatible with LOWer performance BiFET OPERATIONAL AMPLIFIERS for ease in improving performance in existing designs.
BiFET OPERATIONAL AMPLIFIERS offer the inherently HIGHer input impedance of the JFET-input transistors, without sacrificing the output drive associated with bipolar AMPLIFIERS. This makes them better suited for interfacing with HIGH-impedance sensors or very LOW-level ac signals. They also feature inherently better ac response than bipolar or CMOS devices having comparable power consumption.
The TLE207x family of BiFET AMPLIFIERS are Texas Instruments HIGHest performance BiFETs, with tighter input offset voltage and ensured maximum NOISE specifications. Designers requiring less stringent specifications but seeking the improved ac characteristics of the TLE207x should consider the TLE208x OPERATIONAL amplifier family.
Because BiFET OPERATIONAL AMPLIFIERS are designed for use with dual power supplies, care must be taken to observe common-mode input voltage limits and output swing when operating from a single supply. DC biasing of the input signal is required and loads should be terminated to a virtual ground node at mid-supply. Texas Instruments TLE2426 integrated virtual ground generator is useful when operating BiFET AMPLIFIERS from single supplies.
The TLE207x are fully specified at ±15 V and ±5 V. For operation in LOW-voltage and/or single-supply systems, Texas Instruments LinCMOS families of OPERATIONAL AMPLIFIERS (TLC- and TLV-prefix) are recommended. When moving from BiFET to CMOS AMPLIFIERS, particular attention should be paid to slew rate and bandwidth requirements and output loading.

● Direct Upgrades to TL05x, TL07x, and
   TL08x BiFET OPERATIONAL AMPLIFIERS
● Greater Than 2× Bandwidth (10 MHz) and
   3× Slew Rate (45 V/µs) Than TL07x
● Ensured Maximum NOISE Floor
   17 nV/√Hz
● On-Chip Offset Voltage Trimming for
   Improved DC Performance
● Wider Supply Rails Increase Dynamic
   Signal Range to ±19 V

View
Part Name(s) : TLE2141AM TLE2141AMFK TLE2141AMJG TLE2141M TLE2141MFK TLE2141MJG TLE2141Y TI
Texas Instruments
Description : EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS

description
The TLE2141M and TLE2141AM are HIGH-performance, internally compensated OPERATIONAL AMPLIFIERS built using Texas Instruments complementary bipolar Excalibur process. The TLE2141AM is a tighter offset voltage grade of the TLE2141M. Both are pin-compatible upgrades to standard industry products.
The design incorporates a patent-pending input stage that simultaneously achieves LOW audio band NOISE of 10.5 nV/√Hz with a 10-Hz 1/f corner and symmetrical 40-V/µs slew rate typically with loads up to 800 pF. The resulting LOW distortion and HIGH power bandwidth are important in HIGH-fidelity audio applications. A fast settling time of 340 ns to 0.1% of a 10-V step with a 2-kΩ/100-pF load is useful in fast actuator/positioning drivers. Under similar test conditions, settling time to 0.01% is 400 ns.

available features
LOW NOISE:
   10 Hz . . . 15 nV/√Hz
   1 kHz . . . 10.5 nV/√Hz
• 10000-pF Load Capability
• 20-mA Min Short-Circuit Output Current
• 30-V/µs Min Slew Rate
HIGH Gain-Bandwidth Product . . . 5.9 MHz
LOW VIO . . . 500 µV Max at 25°C
• Single or Split Supply . . . 4 V to 44 V
• Fast Settling Time
   340 ns to 0.1%
   400 ns to 0.01%
• Saturation Recovery . . . 150 ns
• Large Output Swing . . . VCC– +0.1 V to VCC+ – 1 V

 

View
Part Name(s) : OPA27CJ OPA27CZ TI
Texas Instruments
Description : Ultra-LOW NOISE, PRECISION OPERATIONAL AMPLIFIERS

DESCRIPTION
The OPA27 and OPA37 are ultra-LOW NOISE, HIGH-PRECISION monolithic OPERATIONAL AMPLIFIERS.
Laser-trimmed thin-film resistors provide excellent long-term voltage offset stability and alLOW superior voltage offset compared to common zener-zap techniques.
A unique bias current cancellation circuit alLOWs bias and offset current specifications to be met over the full –40°C to +85°C temperature range.
The OPA27 is internally compensated for unity-gain stability.
The decompensated OPA37 requires a closed-loop gain ≥ 5.
The Texas Instruments’ OPA27 and OPA37 are improved replacements for the industry-standard OP-27 and OP-37.

FEATURES
LOW NOISE: 4.5nV/√Hz max at 1kHz
LOW OFFSET: 100µV max
LOW DRIFT: 0.4µV/°C
HIGH OPEN-LOOP GAIN: 117dB min
HIGH COMMON-MODE REJECTION: 100dB min
HIGH POWER-SUPPLY REJECTION: 94dB min
● FITS OP-07, OP-05, AD510, AND AD517 SOCKETS

APPLICATIONS
PRECISION INSTRUMENTATION
● DATA ACQUISITION
● TEST EQUIPMENT
● PROFESSIONAL AUDIO EQUIPMENT
● TRANSDUCER AMPLIFIERS
● RADIATION HARD EQUIPMENT

 

View
Part Name(s) : TLE2141-Q1 TLE2141QDRQ1 Texas-Instruments
Texas Instruments
Description : Excalibur™ LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS

DESCRIPTION
The TLE2141-Q1 device is a HIGH-performance, internally compensated OPERATIONAL amplifier built using the Texas Instruments complementary bipolar Excalibur™ process. It is a pin-compatible upgrade to standard industry products.
The design incorporates an input stage that simultaneously achieves LOW audio-band NOISE of 10.5 nV/√Hz with a 10-Hz 1/f corner and symmetrical 40-V/μs slew rate typically with loads up to 800 pF. The resulting LOW distortion and HIGH power bandwidth are important in HIGH-fidelity audio applications. A fast settling time of 340 ns to 0.1% of a 10-V step with a 2-kΩ/100-pF load is useful in fast actuator/positioning drivers. Under similar test conditions, settling time to 0.01% is 400 ns.

FEATURES
• Qualified for Automotive Applications
LOW NOISE
   – 10 Hz … 15 nV/√Hz
   – 1 kHz … 10.5 nV/√Hz
• 10000-pF Load Capability
• 20-mA Min Short-Circuit Output Current
• 27-V/μs Slew Rate (Min)
HIGH Gain-Bandwidth Product … 5.9 MHz
LOW VIO … 500 μV (Max) at 25°C
• Single or Split Supply … 4 V to 44 V
• Fast Settling Time
   – 340 ns to 0.1%
   – 400 ns to 0.01%
• Saturation Recovery … 150 ns
• Large Output Swing … VCC– + 0.1 V to VCC+ – 1 V

 

View

1

2345678910 Next

 

All Rights Reserved © datasheetbank.com 2014 - 2019 [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]