datasheetbank_Logo    Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site
Part Name  

P/N + Description + Content Search

Search Words :

Part Name(s) : 587B062LPE 587B102LPE 587B162LPE 587B302LPE PROTEC
Protek Devices
Description : LOW PROFILE 240V AC POWER LINE SURGE SUPPRESSOR

DESCRIPTION
The 587B LOW PROFILE (LPE) Series is designed for European applications where no LINE to ground or neutral to ground suppression is alLOWed. These modules employ a three stage technology proven to be the most cost effective and reliable method in protecting sensitive electronic equipment from over voltage transients. This series is designed to protect AC POWERed equipment from the 6,000 Volt peak open circuit voltage and 3,000 Amp short circuit current as defined in ANSI/IEEE C62.41, Category CI.

FEATURES
• Compatble with IEC 61000-4-5 (SURGE): 1kA, 8/20µs, Level 4 (LINE Gnd) & 333A, Level 4 (LINE-LINE)
• Meets ANSI/IEEE C62.41 Outdoor Requirements
• Listed to CSA, File LR65240 (Except 587B302LPE)
• Differental Mode Protecton
LOW Clamping Voltage
• Nanosecond Response Time
• Long Life and Maintenance Free
• Finger Safe Connectons

applications
• Hard Wired Equipment AC POWER Protecton
• Load Side Distributon Systems
• Secondary Protecton for Light Industrail AC POWER

View
Part Name(s) : 587B062LP 587B102LP 587B162LP 587B302LP Protek-Devices
ProTek Devices.
Description : LOW PROFILE 240V AC POWER LINE SURGE SUPPRESSOR

DESCRIPTION
The 587B LOW PROFILE (LP) Series of 240 Volt AC SURGE SUPPRESSORs is designed for use by the OEM, equipment installer and or maintenance contrACtor. These modules employ a three stage technology proven to be the most cost effective and reliable method in protecting sensitive electronic equipment from over voltage transients. This series is designed to protect AC POWERed equipment from the 6,000 Volt peak open circuit voltage and 3,000 Amp short circuit current as defined in ANSI/IEEE C62.41, Category CI.

FEATURES
✔ Meets ANSI/IEEE C62.41 Outdoor Requirements
✔ Listed to CSA, File LR65240 (Except 587B302LP)
✔ Differential and Common Mode Protection
LOW Clamping Voltage
✔ Nanosecond Response Time
✔ Long Life and Maintenance Free
✔ Finger Safe Connectors

APPLICATIONS
✔ Hard Wired Equipment AC POWER Protection
✔ Load Side Distribution Systems
✔ Secondary Protection for Light Industrial AC POWER

View
Part Name(s) : 587B062LPE 587B102LPE 587B162LPE 587B302LPE Protek-Devices
ProTek Devices.
Description : LOW PROFILE 240V AC POWER LINE SURGE SUPPRESSOR

DESCRIPTION
The 587B LOW PROFILE (LPE) Series is designed for European applications where no LINE to ground or neutral to ground suppression is alLOWed. These modules employ a three stage technology proven to be the most cost effective and reliable method in protecting sensitive electronic equipment from over voltage transients. This series is designed to protect AC POWERed equipment from the 6,000 Volt peak open circuit voltage and 3,000 Amp short circuit current as defined in ANSI/IEEE C62.41, Category CI.

FEATURES
✔ Meets ANSI/IEEE C62.41 Outdoor Requirements
✔ Listed to CSA, File LR65240 (Except 587B302LPE)
✔ Differential Mode Protection
LOW Clamping Voltage
✔ Nanosecond Response Time
✔ Long Life and Maintenance Free
✔ Finger Safe Connectors

APPLICATIONS
✔ Hard Wired Equipment AC POWER Protection
✔ Load Side Distribution Systems
✔ Secondary Protection for Light Industrial AC POWER

View
Part Name(s) : 587B051LP 587B101LP 587B151LP 587B301LP Protek-Devices
ProTek Devices.
Description : LOW PROFILE 120V AC POWER LINE SURGE SUPPRESSOR

DESCRIPTION
The 587B LOW PROFILE (LP) Series of 120 Volt AC SURGE SUPPRESSORs is designed for use by the OEM, equipment installer and or maintenance contrACtor. These modules employ a three stage technology proven to be the most cost effective and reliable method in protecting sensitive electronic equipment from over voltage transients.

FEATURES
✔ Meets ANSI/IEEE C62.41 Outdoor Requirements
✔ Listed to CSA, File LR65240
✔ Differential and Common Mode Protection
LOW Clamping Voltage
✔ Nanosecond Response Time
✔ Long Life and Maintenance Free
✔ Finger Safe Connectors

APPLICATIONS
✔ Hard Wired Equipment AC POWER Protection
✔ Load Side Distribution Systems
✔ Secondary Protection for Light Industrial AC POWER

MECHANICAL CHARACTERISTICS
✔ Plastic PACkage
✔ Weight: 360 Grams (Approximate)
✔ Flammability Rating UL 94V-0
✔ Device Marking: Part Number, Date Code, Logo, Voltage and Current Rating

View
Part Name(s) : 587B062 587B162 587B302 Protek-Devices
ProTek Devices.
Description : 240V AC POWER LINE SURGE SUPPRESSOR

DESCRIPTION
The 587B Series of 240 Volt AC SURGE SUPPRESSORs is designed for use by the OEM, equipment installer and or maintenance contrACtor. These modules employ a three stage technology proven to be the most cost effective and reliable method in protect ing sensitive electronic equipment from over voltage transients. This series is designed to protect AC POWERed equipment from the 6,000 volt peak open circuit voltage and 3,000 Amp short circuit current as defined in ANSI/IEEE C62.41, Category C1.

FEATURES
✔ Meets ANSI/IEEE C62.41 Requirements
✔ Listed to CSA, File LR65240
✔ Differential Mode Protection
LOW Clamping Voltage
✔ Nanosecond Response Time
✔ Long Life and Maintenance Free

APPLICATIONS
✔ Hard Wired Equipment AC POWER Protection
✔ Load Side Distribution Systems
✔ Secondary Protection for Light Industrial AC POWER

View
Part Name(s) : 587B051 587B151 587B201 587B301 587BXXX 587BXXX 587B051 587B151 587B201 587B301 Protek-Devices
ProTek Devices.
Description : 120V AC POWER LINE SURGE SUPPRESSOR

DESCRIPTION
The 587B Series of 120 Volt AC SURGE SUPPRESSORs is designed for use by the OEM, equipment installer and or maintenance contrACtor. These modules employ a three stage technology proven to be the most cost effectve and reliable method in protectng sensitve electronic equipment from over voltage transients. This series is designed to protect AC POWERed equipment from the 6,000 volt peak open circuit voltage and 3,000 Amp short circuit current as defned in ANSI/IEEE C62.41, Category C1.
The 587B Series offers a high degree of protecton against 120 VAC EMI LINE noise. It is ideal for protectng 400 Volt components because the solid state TVS technology assures that the LINE-to-neutral voltage will not exceed 400 Volts. While the modules are designed for transient voltage protecton, the advanced circuitry will also atenuate the amplitude and sLOW the rate of rise of high frequency noise ACtng as an EMI flter. The 587B Series includes differental mode protecton, which is effectve in reducing interference from LINE to equipment and are effectve in reducing equipment generated noise to meet FCC, VDE and CSA interference requirements.

FEATURES
• Compatble with IEC 61000-4-5 (SURGE): 1kA, 8/20µs, Level 4 (LINE Gnd) & 333A, Level 4 (LINE-LINE)
• Meets ANSI/IEEE C62.41 Requirements
• Listed to CSA, File LR65240
• Differental and Common Mode Protecton
LOW Clamping Voltage
• Nanosecond Response Time
• Long Life and Maintenance Free

APPLICATIONS
• Hard Wired Equipment AC POWER Protecton
• Load Side Distributon Systems
• Secondary Protecton for Light Industrail AC POWER

View
Part Name(s) : ESDALC5-1BT2Y ST-Microelectronics
STMicroelectronics
Description : Automotive single-LINE LOW capACitance Transil™, transient SURGE voltage SUPPRESSOR (TVS) for ESD protection

Description
The ESDALC5-1BT2Y is bidirectional single-LINE TVS diode designed to protect data LINEs or other I/O ports against ESD transients.
This device is ideal for applications where both printed circuit board spACe and POWER absorption capability are required.

Features
• Single-LINE bidirectional protection
• Breakdown voltage = 5.8 V min.
LOW capACitance = 26 pF at 0 V
• Lead-free pACkages
• ECOPACK®2 compliant component
• AEC-Q101 qualified

Benefits
LOW capACitance for optimized data integrity
LOW leakage current < 60 nA
LOW PCB spACe consumption: 0.6 mm2
• High reliability offered by monolithic integration

Applications
Where transient overvoltage protection in ESD sensitive equipment is required, such as:
• Automotive applications
• Computers
• Printers
• Communication systems
• Cellular phone handsets and ACcessories
• Video equipment

View
Part Name(s) : ESDALC6V1-1M2 ESDALC6V1-1M2 ST-Microelectronics
STMicroelectronics
Description : Single LINE LOW capACitance Transil™, transient SURGE voltage SUPPRESSOR (TVS) for ESD protection

Description
The ESDALC6V1-1M2 is a unidirectional single LINE TVS diode designed to protect the data LINEs or other I/O ports against ESD transients.
The device is ideal for applications where both reduced LINE capACitance and board spACe saving are required.

Features
■ Single LINE LOW capACitance Transil diode
■ Unidirectional ESD protection
■ ESD protection > 30 kV (IEC 61000-4-2 contACt discharge)
■ Breakdown voltage VBR = 6.1 V min.
LOW diode capACitance (22 pF @ 0 V)
LOW leakage current (< 100 nA @ 3 V)
■ Very small PCB area (0.6 mm2)
■ RoHS compliant

Benefits
■ High ESD protection level
■ High integration
■ Suitable for high density boards

Applications
Where transient overvoltage protection in ESD sensitive equipment is required, such as:
■ Computers
■ Printers
■ Communication systems
■ Cellular phone handsets and ACcessories
■ Video equipment

View
Part Name(s) : 60KS200C 90KS200C 60KS200C 90KS200C 60KS200C 90KS200C 60KS200C 90KS200C Protek-Devices
ProTek Devices.
Description : SHIPBOARD/AC POWER BUS VOLTAGE SUPPRESSOR

FEATURES
✔ Meets the FolLOWing Military Specifications:
   - DOD-STD-1399 - MIL-STD-704A
✔ 60 & 90 kiLOWatts Peak Pulse POWER per LINE (tp=1.2/50µs)
✔ EACh Device 100% Tested
✔ 200 Volts Bidirectional

APPLICATIONS
AC POWER Protection
✔ Shipboard (LINE-LINE) Protection
✔ Differential AC POWER Bus
✔ Aircraft AC POWER Bus

View
Part Name(s) : ESDALC5-1BM2 ESDALC5-1BT2 ESDALC5-1BM2 ESDALC5-1BT2 ST-Microelectronics
STMicroelectronics
Description : Single LINE LOW capACitance Transil™, transient SURGE voltage SUPPRESSOR (TVS) for ESD protection

Description
The ESDALC5-1BM2 and ESDALC5-1BT2 are bidirectional single LINE TVS diodes designed to protect dataLINEs or other I/O ports against ESD transients.
These devices are ideal for applications where both reduced LINE capACitance and board spACe saving are required.

Features
■ Single LINE LOW capACitance Transil diode
■ Bidirectional ESD protection
■ Breakdown Voltage Vbr = 5 V min.
LOW diode capACitance (26 pF typ at 0 V)
LOW leakage current < 50 nA @ 3 V
■ Very small PCB area: 0.6 mm²

Benefits
■ High ESD protection level
■ High integration
■ Suitable for high density boards
■ Lead-free
■ “Halogen-free” ACcording to ECOPACK®2

Applications
Where transient overvoltage protection in ESD sensitive equipment is required, such as:
■ Computers
■ Printers
■ Communication systems
■ Cellular phone handsets and ACcessories
■ Video equipment

View

1

2345678910 Next

 

All Rights Reserved © datasheetbank.com 2014 - 2019 [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]