datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

P/N + Description + Content Search

Search Word's :
Description : TaNFilm® High Temperature DIP and SIP Networks

TaNFilm® High Temperature DIP and SIP Networks

The IRC 1900HT and 4700HT Series is the ultimate combination of precision performance, reliability, and long term stability in a low profile, TaNFilm® DIP and SIP packages. The rugged welded lead construction combined with the inherent passivation characteristics of tantalum nitride film insure superior continuous performance in high temperature applications over the installed life of the part.

1900HT / 4700HT SERIES
• Inherent reliability
• Custom configurations available
• Bonded leads not susceptible to solder reflow problems
• Absolute tolerence to ±0.1% - ratio accuracy to ±0.05%
• Absolute TCR to ±25 ppm/°C - ratio tracking to ±5ppm/°C

Description : GANG PROGRAMMERS FOR ST62 MCU FAMILY

DESCRIPTION
The ST62 gang programmers are designed for programming up to 10 EPROM or OTP devices. It can run either in standalone or remote mode under control of a Windows compatible PC.
In standalone mode, the target ST62 MCUs are programmed with a simple key operation directly from a master EPROM memory or from a master EPROM MCU. Two color LEDs indicate for each target device the operational pass or fail. Both VERIFY and BLANK CHECK functions are pro vided.
In Remote mode, the gang programmer is connected to a PC through an RS232 serial channel. Object code in either S19 or INTEL HEX format is read from disk files to program the target devices.
The Windows software also offers VERIFY, BLANK CHECK, READ master and other utility functions. The software allows various user friend ly facilities, such as re-instating the same pro gramming session, user selectable programming steps.
The gang programmer is made up of a two parts, a base unit common to all ST62XX devices and a dedicated package adaptator.

HARDWARE FEATURES
■ Programs simultaneously up to 10 ST62Exx EPROM and OTP MCUs
■ Standalone and PC driven modes
DIP and SO packages supported

SOFTWARE FEATURES
■ Windows based software
■ S19 or INTEL hex file format

Part Name(s) : LA7687 LA7687A
SANYO
SANYO -> Panasonic
Description : Application (TV Horizontal Synthesizer Circuit) / DIP 52P

LA7687 Datasheet Pinout : Sanyo 52Pin, TV Horizontal Synthesizer Circuit.

Description : Generation DIP and Mini-DIP-IPM

Features:
• Employing 5th generation planar IGBT chips with 0.6µm design rule or CSTBT™ technology with superior loss performance
• Ultra compact dual or single-in-line transfer mold package (compatible with 2nd generation)
• Including driver and protection circuitry (UV, SC)
DIP-IPM with reduction of thermal resistance by 20%
• 2500Vrms isolation voltage
• High-active interface logic for direct connection to a 3V or 5V MCU
• Highest reliability and optimised EMI performance
• Available from 3A to 50A / 600V for motor ratings from 0.1kW to 3.7kW
• Optional with open emitter topology for vector control
• All Mitsubishi DIP and Mini-DIP-IPMs have lead-free terminals
• From January 2006 onwards, all DIP and Mini-DIP-IPMs will be supplied with completely lead-free technology
   

Description : 2nd Generation DIP and Mini-DIP-IPM

Features:
• Ultra Compact Transfer Mold Package
• Including Drive and Protection ICs (low and high voltage drive ICs)
• Low and High Speed Types
• All Mitsubishi DIP and Mini-DIP-IPMs have lead-free terminals
• From January 2006 onwards, all DIP and Mini-DIP-IPMs will be supplied with completely lead-free technology

Description : 32.768kHz Temperature-Compensated Crystal Oscillator

GENERAL DESCRIPTION
The DS32kHz is a temperature-compensated crystal oscillator (TCXO) with an output frequency of 32.768kHz. This device addresses applications requiring better timekeeping accuracy, and can be used to drive the X1 input of most Dallas Semiconductor real-time clocks (RTCs), chipsets, and other ICs containing RTCs. This device is available in commercial (DS32kHz) and industrial (DS32kHz-N) temperature versions.

FEATURES
Accurate to ±4 Minutes/Year (-40°C to +85°C)
Accurate to ±1 Minute/Year (0°C to +40°C)
Battery Backup for Continuous Timekeeping
VBAT Operating Voltage: 2.7V to 5.5V with VCC Grounded
VCCOperating Voltage: 4.5V to 5.5V
Operating Temperature Range:
  0°C to +70°C (Commercial)
  -40°C to +85°C (Industrial)
No Calibration Required
Low-Power Consumption
Surface Mountable Using BGA Package
UL Recognized

APPLICATIONS
GPS Receivers
Telematics
Network Timing and Synchronization in Servers,
Routers, Hubs, and Switches
Automatic Power Meters

Description : Thin Film Differential Terminator Resistor Network

Product Description
The PRN103/153/125/155 is a high performance Integrated Passive Device (IPD) designed to eliminate transmission line effects on high-speed data lines on a special bus called SCSI (Small Computer Systems Interface). SCSI is a bus interface covered by an ANSI standard that allows for an input/output bus to connect small computers with a variety of peripheral devices.

Features
• Thin film on silicon
• Tolerance ±2%
• Wide body surface mount SOIC and DIP configuration
• Drop-in replacement to thick film networks
• Also available in custom schematic and configuration

Applications
• Differential SCSI Termination
• SCSI Host Adapter Cards and Other SCSI Devices

Description : Thin Film Differential Terminator Resistor Network

Product Description
The PRN103/153/125/155 is a high performance Integrated Passive Device (IPD) designed to eliminate transmission line effects on high-speed data lines on a special bus called SCSI (Small Computer Systems Interface). SCSI is a bus interface covered by an ANSI standard that allows for an input/output bus to connect small computers with a variety of peripheral devices.

Features
• Thin film on silicon
• Tolerance ±2%
• Wide body surface mount SOIC and DIP configuration
• Drop-in replacement to thick film networks
• Also available in custom schematic and configuration

Applications
• Differential SCSI Termination
• SCSI Host Adapter Cards and Other SCSI Devices

Description : 3M™ Textool™ Receptacles for DIP Sockets

3M™ Textool™ Receptacles for DIP Sockets

• Matching receptacle for every ZIP DIP Socket, including “Universal DIP” and “Shrink DIP
• Mounting flanges hold receptacle to board
• Pre-tapped holes in receptacle body mate with screw-hole in socket to hold socket frmly to receptacle (2 screws provided with each receptacle)
• Available in wire-wrap and solder-tail options, with and without mounting flanges

Description : 5-Function Remote Controller / Package: 14-pin DIP, 14-pin SOIC, 16-pin DIP and 16-pin SOIC

The PTA977P (or 977W) and PT8A978P (or 978LW) provide a complete control functions to the remote controlled toy. The PT8A977P/977W has five input pins corresponding with the five function buttons i.e, forward, backward, rightward, leftward and turbo.

The encoding circuit in the PT8A977P/977W sends digital codes to the two output pins SO and SC. The digital codes correspond to the definite function buttons or their combinations. The SO and SC outputs are used in wireless and infra-red applications respectively.

12345678910 Next

All Rights Reserved© datasheetbank.com  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]