P/N + Description + Content Search

DESCRIPTION
The NMH series of industrial temperature range DC-DC CONVERTERS are the standard building blocks for on-board point-of-use power systems. They are ideally suited for providing DUAL rail supplies on single rail boards with the added benefit of galvanic isolation to reduce circuit noise. All of the rated power may be drawn from a single pin provided the total load does not exceed 2W.
Pin compatibility with the NMA 1 watt series ensures minimal effort in upgrading distributed power systems.

FEATURES
■ Wide Temperature performance at full 2 Watt load, –40°C to 85°C
■ DUAL OUTPUT from a Single Input Rail
■ Industry Standard Pinout
■ Power Sharing on OUTPUT
■ 1kVDC Isolation
■ Efficiency to 86%
■ Power Density up to 1.44W/cm3
■ 5V, 12V, 24V & 48V Input
■ 5V, 9V,12V and 15V OUTPUT
■ Footprint from 1.46cm2
■ UL 94V-0 Package Material
■ No Heatsink Required
■ Internal SMD Construction
■ Toroidal Magnetics
■ Fully Encapsulated
■ No External Components Required
■ MTTF up to 2.0 Million hours
■ Custom Solutions Available
■ No Electrolytic or Tantalum Capacitors

Key Features:
• 2W OUTPUT Power
• Miniature SIP Case
• UL Approved (File E245422)
• DUAL ISOLATED OUTPUTs
• 1,000 VDC Isolation
• >3.5 MHour MTBF
• 12 Standard Models
• Industry Standard Pin-Out
• LOWEST COST!!

[MicroPower Direct]

Key Features:
•2W OUTPUT Power
•Miniature SIP Case
•UL Approved (File E245422)
•DUAL ISOLATED OUTPUTs
•1,000 VDC Isolation
•>3.5 MHour MTBF
•12 Standard Models
•Industry Standard Pin-Out
• LOWEST COST!!

DESCRIPTION
The NML series of DC/DC CONVERTERS is particularly suited to isolating and/or converting DC power rails. The galvanic isolation allows the device to be configured to provide an ISOLATED negative rail in systems where only positive rails exist. The wide temperature range guarantees startup from –40°C and full 2 watt OUTPUT at 85°C.

FEATURES
■ UL 60950 recognised
■ Single ISOLATED OUTPUT
■ 1kVDC isolation ‘Hi Pot Test’
■ Efficiency up to 85%
■ Wide temperature performance at full 2 watt load, –40°C to 85°C
■ Industry standard pinout
■ 5V & 12V input
■ 5V, 9V, 12V and 15V OUTPUT
■ Internal SMD construction
■ No external components required
■ MTTF up to 2.3 million hours
■ Custom solutions available
■ Pin compatible with CME, CRE1, CRL2, LME, MEE1, NKE & NME series
■ No electrolytic or tantalum capacitors

Single & DUAL OUTPUT Miniature, 2W SIP DC/DC CONVERTERS

Key Features:
•2W OUTPUT Power
•Miniature SIP Case
•Single & DUAL OUTPUTs
•1,000 VDC Isolation
•>1.12 MHour MTBF
•28 Standard Models
•Industry Standard Pin-Out

[Murata]

DESCRIPTION
The NMS series of DC/DC CONVERTERS are UL1950 recognized which makes them ideal for all telecom and safety applications where approved isolation is required. The low profile package allows mounting in rack systems without risk of touching other boards. The OUTPUT configuration allows all of the rated power to be drawn from a single pin provided the total load does not exceed 2 watts. The devices feature low noise and low isolation capacitance suiltable for applications in high noise environments, e.g. heavy electrical machine interface.

FEATURES
■ RoHS compliant
■ UL1950 recognized
■ Efficiency to 82%
■ Power density up to 0.44W/cm3
■ DUAL OUTPUTs
■ Low profile package
■ UL 94V-0 package material
■ No heatsink required
■ Footprint 4.75cm2
■ 6kVDC isolation
■ 5V & 12V input
■ 5V, 9V, 12V and 15V OUTPUT
■ Internal SMD construction
■ Fully encapsulated with toroidal magnetics
■ MTTF up to 747 kHrs
■ PCB mounting

DESCRIPTION
The NML series of DC/DC CONVERTERS is particularly suited to isolating and/or converting DC power rails. The galvanic isolation allows the device to be configured to provide an ISOLATED negative rail in systems where only positive rails exist. The wide temperature range guarantees startup from –40°C and full 2 watt OUTPUT at 85°C. Pin compatibility with the NME and LME ensures ease of upgradeability.

FEATURES
■ RoHS compliant
■ Single ISOLATED OUTPUT
■ 1kVDC isolation
■ Efficiency up to 85%
■ Wide temperature performance at full 2 watt load, –40°C to 85°C
■ Power density 2.01W/cm3
■ UL 94V-0 package material
■ Footprint from 1.05cm2
■ Industry standard pinout
■ 5V & 12V input
■ 5V, 9V, 12V and 15V OUTPUT
■ No heatsink required
■ Internal SMD construction
■ Fully encapsulated with toroidal magnetics
■ No external components required
■ MTTF up to 2.3 million hours
■ Custom solutions available
■ Pin compatible with LME & NME series
■ No electrolytic or tantalum capacitors

DESCRIPTION
The NMS series of DC/DC CONVERTERS are UL1950 recognized which makes them ideal for all telecom and safety applications where approved isolation is required. The low profi le package allows mounting in rack systems without risk of touching other boards. The OUTPUT confi guration allows all of the rated power to be drawn from a single pin provided the total load does not exceed 2 watts. The devices feature low noise and low isolation capacitance suiltable for applications in high noise environments, e.g. heavy electrical machine interface.

FEATURES
■ RoHS compliant
■ UL1950 recognized
■ Effi ciency to 82%
■ Power density up to 0.44W/cm3
■ DUAL OUTPUTs
■ Low profi le package
■ UL 94V-0 package material
■ No heatsink required
■ Footprint 4.75cm2
■ 6kVDC isolation
■ 5V & 12V input
■ 5V, 9V, 12V and 15V OUTPUT
■ Internal SMD construction
■ Fully encapsulated with toroidal magnetics
■ MTTF up to 747 kHrs
■ PCB mounting

Single & DUAL OUTPUT Miniature, 2W SIP DC/DC CONVERTERS

Key Features:
•2W OUTPUT Power
•Miniature SIP Case
•Single & DUAL OUTPUTs
•1,000 VDC Isolation
•>1.12 MHour MTBF
•28 Standard Models
•Industry Standard Pin-Out