datasheetbank_Logo     Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

P/N + Description + Content Search

Search Words :

Part Name(s) : MC1471 MC1741C MC1741CD MC1741CDR2 MC1741CP1 ON-Semiconductor
ON Semiconductor
Description : INTERNALLY COMPENSATED, HIGH PERFORMANCE OPERATIONAL AMPLIFIER View

The MC1741C was designed for use as a summing AMPLIFIER, integrator, or AMPLIFIER with operating characteristics as a function of the external feedback components.

• No Frequency Compensation Required
• Short Circuit Protection
• Offset Voltage Null Capability
• Wide Common Mode and Differential Voltage Ranges
• Low Power Consumption
• No Latch Up

 

Part Name(s) : NE5532NB Philips
Philips Electronics
Description : INTERNALLY-COMPENSATED dual low noise OPERATIONAL AMPLIFIER View

The 5532 is a dual HIGH-PERFORMANCE low noise OPERATIONAL AMPLIFIER. Compared to most of the standard OPERATIONAL AMPLIFIERs, such as the 1458, it shows better noise PERFORMANCE, improved output drive capability and considerably HIGHer small-signal and power bandwidths.

1. Small-signal bandwidth: 10MHz
2. Output drive capability: 600Ω, 10VRMS
3. Input noise voltage:  5nV Hz (typical)
4. DC voltage gain: 50000
5. AC voltage gain: 2200 at 10kHz
6. Power bandwidth: 140kHz
7. Slew rate: 9V/µs
8. Large supply voltage range: ±3 to ±20V
9. COMPENSATED for unity gain

Part Name(s) : NE5532 NE5532A NE5532AD8 NE5532AF NE5532AN NE5532D NE5532D8 NE5532FE NE5532N SA5532 SA5532A SA5532AD8 SA5532AN SA5532D8 SA5532N SE5532 SE5532A SE5532AD8 SE5532AF SE5532AFE SE5532D8 SE5532FE SE5532N Philips
Philips Electronics
Description : INTERNALLY-COMPENSATED dual low noise OPERATIONAL AMPLIFIER View

DESCRIPTION
The 5532 is a dual HIGH-PERFORMANCE low noise OPERATIONAL AMPLIFIER. Compared to most of the standard OPERATIONAL AMPLIFIERs, such as the 1458, it shows better noise PERFORMANCE, improved output drive capability and considerably HIGHer small-signal and power bandwidths.
This makes the device especially suitable for application in HIGH-quality and professional audio equipment, instrumentation and control circuits, and telephone channel AMPLIFIERs. The op amp is INTERNALLY COMPENSATED for gains equal to one. If very low noise is of prime importance, it is recommended that the 5532A version be used because it has guaranteed noise voltage specifications.

FEATURES
• Small-signal bandwidth: 10MHz
• Output drive capability: 600Ω, 10VRMS
• Input noise voltage: 5nV/√Hz (typical)
• DC voltage gain: 50000
• AC voltage gain: 2200 at 10kHz
• Power bandwidth: 140kHz
• Slew rate: 9V/µs
• Large supply voltage range: ±3 to ±20V
COMPENSATED for unity gain

 

Part Name(s) : NE5532 NE5532A SA5532 SE5532 SE5532A NE5532AD8 NE5532AD8G NE5532AD8R2 NE5532AD8R2G NE5532AN NE5532ANG NE5532D NE5532DG NE5532DR2 NE5532DR2G NE5532D8 NE5532D8G NE5532D8R2 NE5532D8R2G NE5532N NE5532NG SA5532N SA5532NG SE5532AD8 SE5532AD8G ON-Semiconductor
ON Semiconductor
Description : INTERNALLY COMPENSATED Dual Low Noise OPERATIONAL AMPLIFIER View

The 5532 is a dual HIGH-PERFORMANCE low noise OPERATIONAL AMPLIFIER. Compared to most of the standard OPERATIONAL AMPLIFIERs, such as the 1458, it shows better noise PERFORMANCE, improved output drive capability and considerably HIGHer small-signal and power bandwidths.
This makes the device especially suitable for application in HIGH-quality and professional audio equipment, instrumentation and control circuits, and telephone channel AMPLIFIERs. The op amp is INTERNALLY COMPENSATED for gains equal to one. If very low noise is of prime importance, it is recommended that the 5532A version be used because it has guaranteed noise voltage specifications.

Features
• Small-Signal Bandwidth: 10 MHz
• Output Drive Capability: 600Ω, 10 VRMS
• Input Noise Voltage: 5.0 nV/√Hz (Typical)
• DC Voltage Gain: 50000
• AC Voltage Gain: 2200 at 10 kHz
• Power Bandwidth: 140 kHz
• Slew Rate: 9.0 V/μs
• Large Supply Voltage Range: ±3.0 to ±20 V
COMPENSATED for Unity Gain
• Pb−Free Packages are Available


Part Name(s) : LA6324N_12 SANYO
SANYO -> Panasonic
Description : HIGH-PERFORMANCE Quad OPERATIONAL AMPLIFIER View

Overview
The LA6324 consists of four independent, HIGH-PERFORMANCE, INTERNALLY phase COMPENSATED OPERATIONAL AMPLIFIERs that are designed to operate from a single power supply over a wide range of voltages. These four OPERATIONAL AMPLIFIERs are packaged in a single package. As in case of conventional general-purpose OPERATIONAL AMPLIFIERs, operation from dual power supplies is also possible and the power dissipation is low. It can be applied to various uses in commercial and industrial equipment including all types of transducer AMPLIFIERs and DC AMPLIFIERs.

Features
• No phase compensation required
• Wide operating voltage range:
   3.0 V to 30.0 V (single supply)
   ±1.5 V to ±15.0 V (dual supplies)
HIGHly resistant to dielectric breakdown
• Input voltag range includes the neighborhood of GND level and output voltage range VOUT is from 0 to VCC –1.5 V.
• Small current dissipation:
   ICC = 0.6 mA typ/VCC = + 5 V, RL = ∞

Part Name(s) : LA6324N LA6324NM SANYO
SANYO -> Panasonic
Description : HIGH-PERFORMANCE Quad OPERATIONAL AMPLIFIER View

Overview
The LA6324 consists of four independent, HIGH-PERFORMANCE, INTERNALLY phase COMPENSATED OPERATIONAL AMPLIFIERs that are designed to operate from a single power supply over a wide range of voltages. These four OPERATIONAL AMPLIFIERs are packaged in a single package. As in case of conventional general-purpose OPERATIONAL AMPLIFIERs, operation from dual power supplies is also possible and the power dissipation is low. It can be applied to various uses in commercial and industrial equipment including all types of transducer AMPLIFIERs and DC AMPLIFIERs.

Features
• No phase compensation required
• Wide operating voltage range:
   3.0 V to 30.0 V (single supply)
   ±1.5 V to ±15.0 V (dual supplies)
HIGHly resistant to dielectric breakdown
• Input voltag range includes the neighborhood of GND level and output voltage range VOUT is from 0 to VCC –1.5 V.
• Small current dissipation:
   ICC = 0.6 mA typ/VCC = + 5 V, RL = ∞

Part Name(s) : LA6324N_96 LA6324NM_96 SANYO
SANYO -> Panasonic
Description : HIGH-PERFORMANCE Quad OPERATIONAL AMPLIFIER View

Overview
The LA6324 consists of four independent, HIGH-PERFORMANCE, INTERNALLY phase COMPENSATED OPERATIONAL AMPLIFIERs that are designed to operate from a single power supply over a wide range of voltages. These four OPERATIONAL AMPLIFIERs are packaged in a single package. As in case of conventional general-purpose OPERATIONAL AMPLIFIERs, operation from dual power supplies is also possible and the power dissipation is low. It can be applied to various uses in commercial and industrial equipment including all types of transducer AMPLIFIERs and DC AMPLIFIERs.

Features
• No phase compensation required
• Wide operating voltage range:
   3.0 V to 30.0 V (single supply)
   ±1.5 V to ±15.0 V (dual supplies)
HIGHly resistant to dielectric breakdown
• Input voltage range includes the neighborhood of GND level and output voltage range VOUT is from 0 to VCC − 1.5 V.
• Small current dissipation:
   ICC = 0.6 mA typ/VCC = +5 V, RL = ∞

Part Name(s) : LA6358NJM SANYO
SANYO -> Panasonic
Description : HIGH-PERFORMANCE Dual OPERATIONAL AMPLIFIER View

Overview
The LA6358NJM is a HIGH-PERFORMANCE dual OPERATIONAL AMPLIFIER that can operate from a single voltage power supply. It features a built-in phase correction circuit. It can also operate from a dual power supply with both positive and negative levels and features low power consumption. The LA6358NJM can be used in a wide range of industrial applications as a transducer AMPLIFIER for all types of transducers, as a DC AMPLIFIER circuit, and for other purposes as well.

Functions
HIGH-PERFORMANCE dual OPERATIONAL AMPLIFIER

Part Name(s) : LA6358NJ SANYO
SANYO -> Panasonic
Description : HIGH PERFORMANCE Dual OPERATIONAL AMPLIFIER View

Overview
The LA6358NJ is a HIGH-PERFORMANCE dual OPERATIONAL AMPLIFIER that can operate from a single voltage power supply. It features a built-in phase correction circuit. It can also operate from a dual power supply with both positive and negative levels and features low power consumption. The LA6358NJ can be used in a wide range of industrial applications as a transducer AMPLIFIER for all types of transducers, as a DC AMPLIFIER circuit, and for other purposes as well.


Functions
HIGH-PERFORMANCE dual OPERATIONAL AMPLIFIER

1

2345678910 Next

All Rights Reserved © datasheetbank.com 2014 - 2020 [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]