datasheetbank_Logo     Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

P/N + Description + Content Search

Search Words :

Part Name(s) : NTE7039 NTE7104 NTE-Electronic
NTE Electronics
Description : INTEGRATED CIRCUIT. VERTICAL DEFLECTION OUTPUT CIRCUIT, W/DRIVE CIRCUIT FOR CRT DISPLAY. View

Description:
The NTE7039 and NTE7104 are VERTICAL DEFLECTION OUTPUT ICs developed FOR use in high–grade TVs
and DISPLAYs. The interlace and crossover distortion responses, in particular, have been greatly im
proved, allowing excellent picture quality on large size television screens and high precision interlace mode DISPLAYs. Also, pulse signals can be used FOR input signals due to the on–chip sawtooth wave generating CIRCUIT and driver CIRCUIT. Further, the DC and AC feedback CIRCUITs can be FORmed with these ICs alone, simplyfing pattern design of sets and ensuring stable perFORmance. The NTE7104 has a maximum DEFLECTION current of 1.8Ap–p, making it appropriate FOR use in portable to mid–size televisions while the NTE7039 has a minimum DEFLECTION current of 2.2Ap–p, so it can be used FOR larger size sets, and can drive television screen sizes from 33 to 37 inches.

Features:
Low Power Dissipation due to On–Chip Pump–Up CIRCUIT
On–Chip 50/60Hz VERTICAL Size Control CIRCUIT
On–Chip Sawtooth Wave Generating CIRCUIT
On–Chip Drive CIRCUIT
ertical OUTPUT CIRCUIT
On–Chip Thermal Protection CIRCUIT
Excellent Interlace Response
Excellent Crossover Response

Part Name(s) : NTE7086 NTE-Electronic
NTE Electronics
Description : INTEGRATED CIRCUIT Sync DEFLECTION CIRCUIT FOR CRT DISPLAY View

Description:
The NTE7086 is a sync•DEFLECTION CIRCUIT IC in a 20–Lead DIP type package dedicated to CRT DISPLAY use. This device can be connected to the NTE1773/NTE1797 (FOR VERTICAL OUTPUT use) to FORm a sync•DEFLECTION CIRCUIT that meets every requirement FOR CRT DISPLAY use.
So far, IC’s FOR color TV use have been applied to the sync•DEFLECTION CIRCUIT FOR CRT DISPLAY use and general–purpose IC’s such as one–shot multivibrators, inverters, and a lot of transistors have been used to FORm the peripherals such as the sync input interface and horizontal phase shifter.
The NTE7086 contains these peripherals on chip and adopts a stable CIRCUIT FOR horizontal oscillation from 15kHz to 100kHz aiming at improving the characteristics required FOR CRT DISPLAY use.

Features:
• The Horizontal Oscillation Frequency can be Adjusted Stably from 15kHz to 100kHz.
• The Horizontal DISPLAY can be Shifted Right/Left.
• The Horizontal/VERTICAL Sync Input can be used intact Regardless of the Difference in Pulse Polarity and Pulse Width.
• The AFC Feedback Sawtooth Wave can be Obtained by Simply Applying a Flyback Pulse to the IC as a Trigger Pulse.
• Any Duty of the Horizontal Pulse Can be Set.
• Good Linearity because DC Bias at VERTICAL OUTPUT Stage is Subjected to Sampling Control within Retrace Time.

On–Chip Functions:
Horizontal Block
• AFC
• Horizontal OSC
• X–Ray Protector
• Horizontal Phase Shifter
• AFC Sawtooth Wave Generator
• Horizontal Pulse Duty Setting

VERTICAL Block
VERTICAL OSC
VERTICAL Sawtooth Wave Generator
• Sampling Type DC Voltage Control

Part Name(s) : NTE7062 NTE-Electronic
NTE Electronics
Description : INTEGRATED CIRCUIT CRT DISPLAY Synchronization DEFLECTION CIRCUIT View

Description:
The NTE7062 is a sync DEFLECTION CIRCUIT in a 20–Lead DIP type package. When used in combination with the NTE1773 or the NTE1797 (FOR VERTICAL OUTPUT use) this device FORms a sync–DEFLECTION CIRCUIT that meets every requirement FOR CRT DISPLAY use.
So far, ICs FOR color TV use have been applied to the sync–DEFLECTION CIRCUIT FOR CRT DISPLAY use and general purpose ICs such as one–shot multivibrators, inverters, and a lot of transistors have been used to FORm the peripherals such as sync input interface, horizontal phase shifter. The NTE7062 contains these peripherals on chip and adopts a stable CIRCUIT FOR horizontal oscillation from 15kHz to 100kHz aiming at improving the characteristics required FOR CRT DISPLAY use.

Features:
• The VERTICAL Pull–In Range is Approximately 20Hz at VERTICAL Sync 50Hz/60Hz.
• The Horizontal Oscillation Frequency can be Adjusted Stably from 15kHz to 100kHz.
• The Horizontal DISPLAY can be Shifted Right/Left.
• The Horizontal/VERTICAL Sync Input can be Used Intact Regardless of the Difference in Pulse Polarity and Pulse Width.
• The AFC Feedback Sawtooth Wave can be Obtained by Simply Applying a Flyback Pulse to the IC as a Trigger Pulse.
• Any Duty of the Horizontal Pulse can be Set.
• Good VERTICAL Linearity because DC Bias at VERTICAL OUTPUT Stage is Subjected to Sampling Control Within Retrace Time.

On–Chip Functions:
Horizontal Block
• AFC
• Horizontal OSC
• X–Ray Protector
• Horizontal Phase Shifter
• AFC Sawtooth Wave Generator
• Horizontal Pulse Duty Setting

VERTICAL Block
VERTICAL OSC
VERTICAL Sawtooth Wave Generator
• Sampling Type DC Voltage Control

 

Part Name(s) : NTE7063 NTE-Electronic
NTE Electronics
Description : INTEGRATED CIRCUIT CRT DISPLAY Synchronization DEFLECTION CIRCUIT View

Description:
The NTE7063 is a sync–DEFLECTION CIRCUIT IC dedicated to CRT DISPLAY use. It can be connected to the NTE1773, NTE1797, or the NTE1855 (FOR VERTICAL OUTPUT use) to FORm a sync–DEFLECTION CIRCUIT that meets every requirement FOR CRT use.
So far, ICs FOR color TV use have been applied to the sync–DEFLECTION CIRCUIT FOR CRT DISPLAY use and general purpose ICs such as one–shot multivibrators, inverters, and a lot of transistors have been used to FORm the peripherals such as sync input interface, horizontal phase shifter. The NTE7063 contains these peripherals on chip and adopts a stable CIRCUIT FOR horizontal oscillation from 15kHz to 100kHz aiming at improving the characteristics required FOR CRT DISPLAY use.
The NTE7063 has independent GND pins FOR the horizontal block and VERTICAL block, thus facilitating pattern layout FOR applications where the NTE7063 is used at high frequencies.

Features:
• The VERTICAL Pull–In Range is Approximately 10Hz at fV = 60Hz.
• The Horizontal Oscillation Frequency can be Adjusted Stably from 15kHz to 100kHz.
• The Horizontal DISPLAY can be Shifted Right/Left.
• The Horizontal/VERTICAL Sync Input can be Used Intact Regardless of the Difference in Pulse Polarity and Pulse Width.
• The AFC Feedback Sawtooth Wave can be Obtained by Simply Applying a Flyback Pulse to the IC as a Trigger Pulse.
• Any Duty of the Horizontal Pulse can be Set.
• Good VERTICAL Linearity because DC Bias at VERTICAL OUTPUT Stage is Subjected to Sampling Control Within Retrace Time.
• Excellent Interlace and VERTICAL Jitter Characteristics on the High–Definition DISPLAY Because of Independent GND Pins FOR the Horizontal Block and VERTICAL Block.

On–Chip Functions:
Horizontal Block
• AFC
• Horizontal OSC
• X–Ray Protector
• Horizontal Phase Shifter
• AFC Sawtooth Wave Generator
• Horizontal Pulse Duty Setting

VERTICAL Block
VERTICAL OSC
VERTICAL Sawtooth Wave Generator
• Sampling Type DC Voltage Control

 


Part Name(s) : NTE7167 NTE-Electronic
NTE Electronics
Description : INTEGRATED CIRCUIT VERTICAL DEFLECTION OUTPUT CIRCUIT View

Description:
The NTE7167 is a VERTICAL DEFLECTION OUTPUT INTEGRATED CIRCUIT in a 7-Lead SIP type package designed FOR use in high-resolution television and CRT DISPLAY systems that use a bus controller system signal processing IC. It can directly drive the DEFLECTION yoke (including the required DC component) from the bus controller system signal processing IC’s sawtooth waveFORm OUTPUT. Since the NTE7167 has a maximum DEFLECTION current of 2.2AP-P, it is optimal FOR use in large aperture products, and is capable of driving 33 to 37 inch class monitors.

Features:
● Low Power Dissipation due to the Provision of a Built-In Pump CIRCUIT
VERTICAL OUTPUT CIRCUIT
● On-Chip Thermal Protection CIRCUIT
● Good Crossover Characteristics
● Supports DC Coupling

Part Name(s) : NTE7085 NTE-Electronic
NTE Electronics
Description : INTEGRATED CIRCUIT VERTICAL DEFLECTION OUTPUT CIRCUIT W/DRIVE CIRCUIT FOR Monitor View

Description:
The NTE7085 is an INTEGRATED CIRCUIT in a 13–Lead SIP type package that contains a VERTICAL DEFLECTION OUTPUT CIRCUIT with a driver FOR color, B/W TV sets, monitors, and DISPLAY units with a large aperture (maximum current 2.2AP–P). The NTE7085 can be used in conjunction with the NTE1863 (NTSC) to provide all the functions required FOR color TV signal processing.

Features:
• Low Power Dissipation due to On–Chip Pump–Up CIRCUIT
• On–Chip 50/60Hz VERTICAL Size Control CIRCUIT
• On–Chip Ramp Generator
• On–Chip Driver CIRCUIT
VERTICAL OUTPUT CIRCUIT
• On–Chip Thermal Protection CIRCUIT
• Minimum Number of External Parts Required

 

Part Name(s) : LA7853 SANYO
SANYO -> Panasonic
Description : CRT DISPLAY Synchronization DEFLECTION CIRCUIT View

Overview
The LA7853 is a sync DEFLECTION CIRCUIT IC dedicated to CRT DISPLAY use. It can be connected to the LA7832, 7833, 7837, 7838 (FOR VERTICAL OUTPUT use) to FORm a sync DEFLECTION CIRCUIT that meets every requirement FOR CRT DISPLAYuse.
So far, ICs FOR color TV use have been applied to the sync DEFLECTION CIRCUIT FOR CRT DISPLAY use and general-purpose ICs such as one-shot multivibrator, inverter and a lot of transistors have been used to FORm the peripherals such as sync input interface, horizontal phase shifter. The LA7853 contains these peripherals on chip and adopts a stable CIRCUIT FOR horizontal oscillation from 15kHz to 100kHz aiming at improving the characteristics requierd FOR CRT dispaly use.
The LA7853 has independent GND pins FOR the horizontal block and VERTICAL block, thus facilitating pattern layout FOR applications where the LA7853 is used at high frequencies.

Features
• The VERTICAL pull-in range is approximately 20Hz, 2 times that of the LA7852, at fV=60Hz.
• The horizontal oscillation frequency can be adjusted stably from 15kHz to 100kHz.
• The horizontal DISPLAY can be shifted right/left.
• The horizontal/VERTICAL sync input can be used intact regardless of the difference in pulse polarity and pulse width.
• The AFC feedback sawtooth wave can be obtained by simply applying a flyback pulse to the IC as a trigger pulse.
• Any duty of the horizontal pulse can be set.
• Good VERTICAL linearity because DC bias at VERTICAL OUTPUT stage is subject to sampling control within retrace time.
• Excellent interlace and VERTICAL jitter characteristics on the high-definition DISPLAY because of independent GND
pins FOR the horizontal block and VERTICAL block.

Part Name(s) : STK792-210 SANYO
SANYO -> Panasonic
Description : VERTICAL DEFLECTION OUTPUT CIRCUIT FOR CTV and CRT DISPLAYs View

Overview
The STK792-210 is a VERTICAL DEFLECTION OUTPUT IC FOR color television and CRT DISPLAYs. It incorporates a VERTICAL DEFLECTION OUTPUT amplifier, centering correction and pumpup CIRCUITs into single package .

Features
VERTICAL centering correction CIRCUIT built-in, variable over a wide range, DC controllable
• Pump-up CIRCUIT built-in FOR low power dissipation
• Supply-independent pump-up CIRCUIT to cover different trace times
• High-current, high withstand voltage OUTPUT amplifier (IOppmax=4A at VCCmax=160V)
• DC controllable VERTICAL amplitude
• Quiescent current adjustment FOR zero crossover distortion in the OUTPUT amplifier
• Wide supply range FOR all loads
• Compatible with DISPLAYs from color television to wideangle vision and HDTV

Applications
• Color television, wide-angle vision, HDTV and CRT DISPLAYs

Part Name(s) : NTE7153 NTE-Electronic
NTE Electronics
Description : INTEGRATED CIRCUIT VERTICAL DEFLECTION OUTPUT CIRCUIT View

Description:
The NTE7153 is a VERTICAL DEFLECTION OUTPUT INTEGRATED CIRCUIT in a 7–Lead SIP type package designed FOR use in TV and CRT DISPLAYs with excellent image quality that use a BUS control system signal processing IC. This device can drive the direct (even including a DC component) DEFLECTION yoke with the sawtooth wave OUTPUT from the BUS control system signal processing IC. Because the maximum DEFLECTION current is 2.2AP–P, the NTE7153 is suitable FOR use in large screen sets.

Features:
● Low Power Dissipation due to Built–In Pump–Up CIRCUIT
VERTICAL OUTPUT CIRCUIT
● Thermal Protection CIRCUIT Built–In
● Excellent Crossover Characteristics
● DC Coupling Possible

1

2345678910 Next

All Rights Reserved © datasheetbank.com 2014 - 2020 [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]