datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

P/N + Description + Content Search

Search Word's :
Description : Ideal for solar inverter compact size, 1a 22A/33A power relays LF-G relays (ALFG)

[Panasonic]

FEATURES
• High capacity
   High capacity control possible at 22A/
   33A (High capacity type) 250V AC rating
   in compact size (L: 15.7 × W: 30.1 ×
   H: 23.3 mm L: .618 × W: 1.185 × H: .917
   inch)
• Contact gap: 1.5 mm .059 inch and
   1.8 mm*** .071 inch
   Compliant with European photovoltaic
   standard (IEC62109* and VDE0126**).
   * Safety standard of PV power inverter
   ** German safety standard of PV power inverter
   *** Due to addition of altitude stipulation (2,000 m
   6,561.68 ft or more) to IEC62109.
   EN61810-1 certified: 2.5 kV surge
   breakdown voltage (between contacts)
• High insulation resistance
   Creepage distance between contact and
   coil terminal: Min. 9.5 mm .354 inch
   Clearance distance between contact and
   coil terminal: Min. 6.5 mm .256 inch
   Surge breakdown voltage: 6 kV
• Coil holding voltage contributes to
   saving energy of equipment
   The coil holding voltage can be reduced
   up to 35%V of the nominal coil voltage
   (Ambient temperature: 20°C 68°F).
   power consumption at the lowest coil
   holding voltage: 170 mW equivalent
   *Coil holding voltage is the coil voltage
   after 100 ms from the applied nominal
   coil voltage.
   *When the ambient temperature during
   use is 85°C 185°F, make the coil holding
   voltage between 45% and 80%V of the
   nominal coil voltage.
• Conforms to various safety
   standards
   UL/C-UL and VDE approved

TYPICAL APPLICATIONS
• Photovoltaic power generation
   systems (power conditioner)
• Uninterruptible power Supplies
   (UPS)
• Home appliances
• Office equipment

Description : Ideal for solar inverter compact size, 1a 22A/33A power relays LF-G relays (ALFG)

FEATURES
• High capacity
High capacity control possible at 22A/33A (High capacity type) 250V AC rating in compact size (L: 15.7 × W: 30.1 × H: 23.3 mm L: .618 × W: 1.185 × H: .917 inch)
• Contact gap: 1.5 mm .059 inch and 1.8 mm*** .071 inch
Compliant with European photovoltaic standard (IEC62109* and VDE0126**).
* Safety standard of PV power inverter
** German safety standard of PV power inverter
*** Due to addition of altitude stipulation (2,000 m
6,561.68 ft or more) to IEC62109.
EN61810-1 certified: 2.5 kV surge
breakdown voltage (between contacts)
• High insulation resistance
Creepage distance between contact and coil terminal: Min. 9.5 mm .354 inch
Clearance distance between contact and coil terminal: Min. 6.5 mm .256 inch
Surge breakdown voltage: 6 kV
• Coil holding voltage contributes to saving energy of equipment
The coil holding voltage can be reduced up to 35%V of the nominal coil voltage (Ambient temperature: 20°C 68°F). power consumption at the lowest coil holding voltage: 170 mW equivalent
*Coil holding voltage is the coil voltage after 100 ms from the applied nominal coil voltage.
*When the ambient temperature during use is 85°C 185°F, make the coil holding voltage between 45% and 80%V of the nominal coil voltage.
• Conforms to various safety standards
UL/C-UL and VDE approved

TYPICAL APPLICATIONS
• Photovoltaic power generation systems (power conditioner)
• Uninterruptible power Supplies (UPS)
• Home appliances
• Office equipment

ETC
Unspecified
Description : kinds of single relays , power relays , automotive relays ...lays , pc-board relays , plug-in relays , PCB relays , miniature relays

kinds of single relays , power relays , automotive relays ...lays , pc-board relays , plug-in relays , PCB relays , miniature relays

Part Name(s) : JQ1P-XX
Panasonic
Panasonic Corporation
Description : JQ relays (1a/1c 5A/10A small power relays)

JQ relays (1a/1c 5A/10A small power relays)

FEATURES
• High electrical noise immunity
• High switching capacity in a compact package
• High sensitivity: 200 mW (1a), 400 mW (1c)
• High surge voltage: 8,000 V between contacts and coil
• UL, CSA, VDE, SEMKO approved and TÜV available
• Class B coil insulation type also available.

TYPICAL APPLICATIONS
• Air conditioners
• Refrigerators
• Microwave ovens
• Heaters

Description : 6-PIN DIP, 200 mA CONTINUOUS LOAD CURRENT 1-ch Optical Coupled MOS FET

DESCRIPTION
PS7112-1A and PS7112L-1A are solid state relays containing a GaAs LED on the light emitting side (input side) and MOSFETs on the output side.

FEATURES
• DESIGNED for AC/DC SWITCHING APPLICATIONS
Ideal for ANALOG SIGNAL CONTROL APPLICATIONS
• LOW LED OPERATING CURRENT: IF = 2 mA
• LOW OFFSET VOLTAGE
• SMALL PACKAGE: 6 Pin DIP

APPLICATIONS
• VOICE TELEPHONY
• AUDIO EQUIPMENT
• AUDIO INSTRUMENTATION

Panasonic
Panasonic Corporation
Description : compact SIZE AUTOMOTIVE RELAY

FEATURES
compact (half-size).
    The base area is approximately half the size of conventional (JS-M) relays. The controller unit can be made more compact.
    Base area has been reduced by one half
• Perfect for automobile electrical systems.
    Over 2 × 105 openings possible with a 14 V DC motor load, an inrush current of 25 A, and steady state current of 5 A. (N.O. side)
• Standard terminal pitch employed
    The terminal array used is identical to that used in small automotive relays.
• Plastic sealed type.
    Plastically sealed for automatic cleaning.
• Line-up of 1 form A and 1 form C.

TYPICAL APPLICATIONS
power windows
• Auto door lock
• Electrically powered sun roof
• Electrically powered mirror
• Cornerring lamp, etc.

Description : MINIATURE power RELAY

FEATURES
compact size for dense PCB layouts
• High power contacts (10A) for use in consumer appliances, HVAC, TV
• Withstands surges of up to 10,000 volts
• Epoxy sealed version available
• UL file E44211; CSA file LR74120
• TÜV file BL980934205001

Description : MINIATURE power RELAY

FEATURES
compact size for dense PCB layouts
• High power contacts (10A) for use in consumer appliances, HVAC, TV
• Withstands surges of up to 10,000 volts
• Epoxy sealed version available
• UL file E44211; CSA file LR74120
• TÜV file BL980934205001

CEL
California Eastern Laboratories.
Description : 6 PIN DIP SOLID STATE RELAY

DESCRIPTION
PS7112-1A and PS7112L-1A are solid state relays containing a GaAs LED on the light emitting side (input side) and MOSFETs on the output side.

FEATURES
• DESIGNED for AC/DC SWITCHING APPLICATIONS
Ideal for ANALOG SIGNAL CONTROL APPLICATIONS
• LOW LED OPERATING CURRENT: IF = 2 mA
• LOW OFFSET VOLTAGE
• SMALL PACKAGE: 6 Pin DIP

APPLICATIONS
• VOICE TELEPHONY
• AUDIO EQUIPMENT
• AUDIO INSTRUMENTATION

Description : 6-PIN DIP, 400 V BREAK DOWN VOLTAGE NORMALLY OPEN TYPE 1-ch Optical Coupled MOS FET

DESCRIPTION
The PS7142-1A and PS7142L-1A are solid state relays containing GaAs LEDs on the light emitting side (input side) and MOS FETs on the output side.
They are suitable for analog signal control because of their low offset and high linearity. The PS7142L-1A has a surface mount type lead.

FEATURES
• 1 channel type (1 a output)
• Low LED operating current (IF = 2 mA)
• Designed for AC/DC switching line changer
• Small package (6-pin DIP)
• Low offset voltage
• Ordering number of taping product : PS7142L-1A-E3, E4: 1 000 pcs/reel
• Pb-Free product
• Safety standards
    • UL approved: File No. E72422
    • BSI approved: No. 8245/8246
    • CSA approved: No. CA 101391

APPLICATIONS
• Exchange equipment
• Measurement equipment
• FA/OA equipment

12345678910 Next

All Rights Reserved© datasheetbank.com  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]