datasheetbank_Logo     Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

P/N + Description + Content Search

Search Words :

Part Name(s) : MT3333 MT3333AV 3333AV MediaTek
MediaTek Inc
Description : HIGH-PERFORMANCE SINGLE-CHIP MULTI-GNSS SOLUTION View

Introduction
Overview
MediaTek MT3333 is a HIGH-PERFORMANCE SINGLE-CHIP MULTI-GNSS SOLUTION that includes CMOS RF, digital baseband, ARM7 CPU and embedded NOR flash. It’s able to achieve the industry’s highest level of sensitivity, accuracy and Time-to-First-Fix (TTFF) with the lowest power consumption. Its small footprint lead-free package and minimal additional BOM requirements provide significant reductions in the design, manufacturing and testing resources required to create devices.

Features
• Specifications
   o GPS/GLONASS/Galileo/BeiDou receiver
   o Supports MULTI-GNSS including QZSS and SBAS ranging
   o Supports WAAS, EGNOS, MSAS and GAGAN
   o 12 multi-tone active interference cancellers (ISSCC2011 award)
   o RTCM ready
   o Indoor and outdoor multi-path detection and compensation
   o Supports FCC E911 compliance and A-GPS1
   o Maximum fixed update rate up to 10 Hz
• Advanced software features
   o EPO™ orbit prediction
   o EASY™ self-generated orbit prediction
   o LOCUS™ logger function
   o Supports time service application, which is achieved by the PPS vs NMEA feature.
• Reference oscillator
   o TCXO
    Frequency: 16.368 MHz, 12.6 ~ 40.0 MHz
    Frequency variation: ±2.5 ppm
   o Crystal
    Frequency: 26 MHz, 12.6 ~ 40.0 MHz
    Frequency accuracy: ±10 ppm
• RF configuration
   o SOC, integrated in single chip with CMOS process
• ARM7EJ-S CPU
   o Up to 158 MHz processor clock
   o Dynamic clock rate control
• Memory:
   o 8Mb internal flash
   o External SPI serial flash of up to 128 Mb
• Pulse-per-second (PPS) GPS time reference
   o Adjustable duty cycle
   o Typical accuracy: ±10 ns
• Power scheme
   o Built-in 1.8 volts Switching Mode Power Supply (SMPS)
   o Direct lithium battery connection (2.8 ~ 4.3 volts)
   o Built-in 1.1 volts RTC LDO, 1.1 volts core LDO and 2.8 volts TCXO LDO
• Built-in reset controller
   o Does not need an external reset control IC
• Internal real-time clock (RTC)
   o 32.768 kHz ± 20 ppm crystal
   o 1.1 volts RTC clock output
   o Supports external pin to wake up MT3333
• Backup mode
   o A Force_On pin to simplify the backup mode application circuit
• Serial interfaces
   o 3 UARTs
   o SPI and I2C
   o GPIO interface (up to 16 pins)
• NMEA
   o NMEA 0183 standard V4.1 and backward compliance
   o Supports 219 datums
• Sensitivity
   o Acquisition: -148 dBm (cold) / -163 dBm (hot)
   o Tracking: -165 dBm
• Ultra-low power consumption (GPS+GLONASS)
   o Acquisition: 37 mW
   o Tracking: 27 mW
• Package
   o VFBGA: 4.3 mm x 4.3 mm, 57 balls, 0.5 mm pitch
• Slim hardware design
   o Mimimun SOLUTION footprint of 52 mm2
   o Single RF Front-End for MULTI-GNSS frequency bands
• Compatibility
   o Pin-to-pin compatiblity with MT3339

Part Name(s) : KS8695X KSZ8695X Micrel
Micrel
Description : Integrated Multi-Port HIGH-PERFORMANCE Gateway SOLUTION View

General Description
The CENTAUR KS8695X, Multi-Port Gateway-on-a-Chip, delivers a new level of networking integration and performance for accelerating broadband gateway development. Key components integrated in the KS8695X include:

• Integrated Layer 2 managed switch with five Fast Ethernet transceivers and patented mixed-signal low power technology, five media access control (MAC) units, a high-speed non-blocking switch fabric, a dedicated address look-up engine, an on-chip frame buffer memory, and LED controls. One port is partitioned for WAN interface with the other four ports for LAN access.
• A 166MHz ARM™ (ARM992T) processor with memory management unit (MMU) and 8KB I-cache and 8KB D cache.
• XceleRouter™ technology for the WAN and LAN interfaces.
• Shared programmable 8/16/32-bit data bus and 22-bit address bus with up to 64MB total memory space for SDRAM, ROM, Flash, SRAM, and all peripheral devices.
• Other peripheral support logic including GPIO, a watchdog timer, an interrupt controller, and a JTAG debugging interface. Complete hardware and software reference designs are available.
The KS8695X represents a new level of total SOLUTION optimized for broadband gateway system development and renders speedy routing performance and connectivity interfaces for value-added networking expansions.

Features
•The CENTAUR KS8695X featuring XceleRouter tech nology is a SINGLE-CHIP multi-port gateway-on-a-chip with all the key components integrated for a high-perfor mance and low-cost broadband gateway.
• ARM922T HIGH-PERFORMANCE CPU Core
    – ARM922T core at 166MHz
    – 8KB I-cache and 8KB D-cache
    – Memory management unit (MMU) for Linux and WinCE®
    – 32-bit ARM and 16-bit thumb instruction sets for smaller memory footprints
• XceleRouter Technology
    – TCP/UDP/IP packet header checksum generation to offload CPU tasks
    –  IPv4 packet filtering on checksum errors
    –  Automatic error packet discard
• Integrated Ethernet Transceivers and Switch Engine
    – Five 10/100 transceivers and five MACs (1P for WAN interface, 4P for LAN switching)
    – 10BASE-T, 100BASE-TX, and 100BASE-FX modes (FX on the WAN port)
    –  On-chip SRAM as frame buffer memory
    –  Wire-speed switching
    –  VLAN ID and 802.1p tag/untag options
    –  Extensive MIB counter management support
    –  IGMP snooping for multicast packet filtering
    –  Port-based VLAN
    – QoS/CoS packet prioritization support: per port, 802.1p and DiffServ-based
    –  802.1D Spanning Tree Protocol support
    –  Dedicated 1K entry look-up engine
    –  Automatic MDI/MDI-X crossover on all ports
    –  Port mirroring/monitoring/sniffing
    –  Broadcast storm protection with % control
    – Full- and half-duplex flow control
• Memory and External I/O Interfaces
    – 8/16/32-bit wide shared data path for SDRAM, ROM/SRAM/Flash and external I/O
    –  Total memory space up to 64MB
    – Intel®/AMD®
-type Flash support
• WAN and LAN DMA Engines and FIFO
    – DMA engine with burst mode support for efficient WAN and LAN data transfers
    –  FIFOs for back-to-back packet transfers
• Peripheral Support
    –  8/16/32-bit external I/O interface supporting PCMCIA or generic CPU/DSP host I/F
    –  Eight general-purpose input/output (GPIO)
    –  Two 32-bit timer counters (one watchdog)
    – Interrupt controller
    – ARM922T JTAG debug interface
• Power Management
    –  Reduced CPU and system clock speeds
• System Design
    –  Up to 166MHz CPU and 125MHz bus speed
• Reference HW/SW Evaluation Kit
    –  Hardware evaluation board (passes class B EMI)
    – Board support package including firmware source codes, linux kernel, and software stacks
    – Documentation for design and programming
• Commercial Temperature Range: 0°C to +70°C
• Available in 208-Pin PQFP

Applications
• Multi-port broadband gateway
• Multi-port firewall and VPN appliances
• Combination wireless and wireline gateway
• Multi-port VoIP gateway
• Fiber-to-the-home managed CPE

Part Name(s) : MT6162 MT6162N MediaTek
MediaTek Inc
Description : Multi-band Multi-mode Single Chip HEDGE Transceiver View

The MT6162 is a SINGLE-CHIP multi-mode multi-band transceiver offering unparalleled integration and feature set resulting in industry’s lowest eBoM. It is fully compliant with 3G mode (3GPP Rel. 6), as well as supporting GSM/GPRS/EDGE modes (GGE). It constitutes with MediaTek’s baseband modem ICs a complete chipset SOLUTION for 3G and GGE cellular user equipment. Quad-band GGE and a wide range of 3G bands support (I - VI, VIII - X) is provided in terms of both frequency ranges and the flexibility of band allocation.

Part Name(s) : BCM2035 Broadcom
Broadcom Corporation
Description : BLUETOOTH SINGLE-CHIP HCI SOLUTION View

The Broadcom BCM2035 is a monolithic SINGLE-CHIP, stand alone baseband processor with an integrated 2.4-GHz transceiver for Bluetooth 1.1 and 1.2 applications. It eliminates the need for external flash memories and active components by integrating critical components into the device, thus minimizing the footprint and system cost of implementing a Bluetooth system.

BCM2035 FEATURES
• Highest available BT radio performance of any single chip SOLUTION
• –90 dBm sensitivity
• Programmable up to +7 dBm output power
• A true SINGLE-CHIP SOLUTION
• Eliminates external flash memory and active components
• World's smallest Bluetooth™ SOLUTION
• Low power consumption in both sleep modes and active operational modes
• Supports UART, USB, and PCM interfaces
• Bluetooth specification version 1.1 compliant supports class 2 and 3 applications
• Fractional-N frequency synthesizer supports any crystal or TCXO source from 12 to 40 MHz
• Automatic calibration and frequency detection of crystal frequency
• Upgradeable to support Bluetooth 1.2 features including adaptive frequency hopping, fast connection, etc.

 


Part Name(s) : LAN9118-MD SMSC
SMSC -> Microchip
Description : High Performance SINGLE-CHIP 10/100 Non PCI Ethernet Controller View

General Description
The LAN9118 is a full-featured, SINGLE-CHIP 10/100 Ethernet controller designed for embedded applications where performance, flexibility, ease of integration and system cost control are required. The LAN9118 has been specifically architected to provide the highest performance possible for any given architecture. The LAN9118 is fully IEEE 802.3 10BASE-T and 802.3u 100BASE-TX compliant.

PRODUCT FEATURES
Highlights
■ Optimized for the highest data-rate applications such as high-definition video and multi-media applications
■ Efficient architecture with low CPU overhead;
■ Easily interfaces to most 32-bit and 16-bit embedded CPU’s
■ Integrated PHY
■ Supports audio & video streaming over Ethernet: multiple high-definition (HD) MPEG2 streams
■ Pin compatible with other members of LAN9118 family (LAN9117, LAN9116 and LAN9115)

Target Applications
■ Video distribution systems, multi-room PVR
■ High-end Cable, satellite, and IP set-top boxes
■ Digital video recorders
■ High definition televisions
■ Digital media clients/servers
■ Home gateways

 

Part Name(s) : AR9280 ETC
Unspecified
Description : SINGLE-CHIP 2.4/5 GHz 802.11n WLAN SOLUTION for PCI-Express? View

[Atheros]

Atheros XSPAN® Technology
Atheros offers the industrys most innovative and complete portfolio of 802.11n wireless LAN chip SOLUTIONs. This generation of Atheros’ XSPAN 802.11n technology builds upon the company’s XSPAN leadership – with enhanced performance, higher integration, smaller form factors and lower overall cost – to meet the needs of the rapidly growing 802.11n market. Like all Atheros 11n SOLUTIONs, the new fourth generation SOLUTIONs are compliant to the IEEE 802.11n specification.

Atheros fourth-generation XSPAN chips feature:
• Leading Integration that delivers end-product cost and form factors
   to drive broad market adoption of 802.11n products;
• Single- and Dual-Band, and Multiple MIMO Configurations that
   enable OEMs to balance product price/performance for specific
   applications and market segment requirements;
• Rich Media & Peripheral Interfaces that anticipate the requirements
   for advanced media networking applications and allow end-product
   feature differentiation;
• Easy Network Setup with the industry’s simple network configuration
   software that supports both the PIN and push-button setup methods.

Product Overview
Introducing the AR9280, the SINGLE-CHIP, dual-band (2.4/5 GHz) SOLUTION for PCIe in XSPANs third generation of products. The AR9280 is the most integrated, most compact 802.11n SOLUTION for dual-band PCIe on the market, featuring a Half-Mini Card form factor that is 30% smaller than the nearest competitive 11n. This breakthrough product will drive the transition of legacy Wi-Fi to 802.11n in the mainstream-priced PC market. It offers the optimal balance of performance, power and price with its dual-band, 2x2 MIMO configuration which features downshift to 1x1 MIMO with Dynamic MIMO Power Save.

SOLUTION Highlights
SINGLE-CHIP, 802.11n compliant wireless LAN client SOLUTION
   with integrated MAC, baseband and dual 2.4/5 GHz radios
• Based on third-generation 802.11n-compliant technology
• Support for 2x2 MIMO with spatial multiplexing and MRC
• Features 1x1 Dynamic MIMO Power Save to conserve system power
• Enables PHY rate of up to 300 Mbps
• Compliant with IEEE 802.11a, 802.11b, 802.11g, 802.11d,
   802.11e, 802.11h, 802.11i, and 802.11n
• Lead-free RoHS compliant

Part Name(s) : LAN9118 LAN9118-MT SMSC
SMSC -> Microchip
Description : High Performance SINGLE-CHIP 10/100 Non PCI Ethernet Controller View

General Description
The LAN9118 is a full-featured, SINGLE-CHIP 10/100 Ethernet controller designed for embedded applications where performance, flexibility, ease of integration and system cost control are required. The LAN9118 has been specifically architected to provide the highest performance possible for any given architecture. The LAN9118 is fully IEEE 802.3 10BASE-T and 802.3u 100BASE-TX compliant.

PRODUCT FEATURES
Highlights
■ Optimized for the highest data-rate applications such as high-definition video and multi-media applications
■ Efficient architecture with low CPU overhead
■ Easily interfaces to most 32-bit and 16-bit embedded CPU’s
■ Integrated PHY
■ Supports audio & video streaming over Ethernet: multiple high-definition (HD) MPEG2 streams
■ Pin compatible with other members of LAN9118 family (LAN9117, LAN9116 and LAN9115)

Target Applications
■ Video distribution systems, multi-room PVR
■ High-end Cable, satellite, and IP set-top boxes
■ Digital video recorders
■ High definition televisions
■ Digital media clients/servers
■ Home gateways

 

Part Name(s) : AR9280 Qualcomm
QUALCOMM Incorporated
Description : SINGLE-CHIP 2.4/5 GHz 802.11n WLAN SOLUTION for PCI-Express View

Technology Overview
Qualcomm offers the industrys most innovative and complete portfolio of 802.11n wireless LAN chip SOLUTIONs. This generation of Qualcomm’s 802.11n technology builds upon the company’s Wi-Fi leadership – with enhanced performance, higher integration, smaller form factors and lower overall cost – to meet the needs of the rapidly growing 802.11n market. Like all Qualcomm’s 11n SOLUTIONs, the new fourth-generation SOLUTIONs are compliant to the IEEE 802.11n specification.

Qualcomm fourth-generation Wi-Fi SOLUTIONs feature:
● Leading Integration that delivers end-product cost and form
   factors to drive broad market adoption of 802.11n products
● Single- and Dual-Band, and Multiple MIMO Configurations that
   enable OEMs to balance product price/performance for specific
   applications and market segment requirements
● Rich Media and Peripheral Interfaces that anticipate the
   requirements for advanced media networking applications
   and allow end-product feature differentiation
● Easy Network Setup with the industry’s simple network
   configuration software that supports both the PIN and
   push-button setup methods

Product Overview
Introducing the AR9280, the SINGLE-CHIP, dual-band (2.4/5 GHz) SOLUTION for PCIe in Qualcomm’s third generation of products. The AR9280 is the most integrated, most compact 802.11n SOLUTION for dual-band PCIe on the market, featuring a Half-Mini Card form factor that is 30% smaller than the nearest competitive 11n. This breakthrough product will drive the transition of legacy Wi-Fi to 802.11n in the mainstream-priced PC market. It offers the optimal balance of performance, power and price with its dual-band, 2x2 MIMO configuration which features downshift to 1x1 MIMO with Dynamic MIMO Power Save.

SOLUTION Highlights
SINGLE-CHIP, 802.11n compliant wireless LAN client SOLUTION
   with integrated MAC, baseband and dual 2.4/5 GHz radios
● Based on third-generation 802.11n-compliant technology
● Support for 2x2 MIMO with spatial multiplexing and MRC
● Features 1x1 Dynamic MIMO Power Save to conserve system power
● Enables PHY rate of up to 300 Mbps
● Compliant with IEEE 802.11a, 802.11b, 802.11g, 802.11d,
   802.11e, 802.11h, 802.11i, and 802.11n
● Lead-free RoHS compliant

Part Name(s) : CX25894 CX25895 CX25896 Conexant
Conexant Systems
Description : SINGLE-CHIP, HIGH-PERFORMANCE (DVI) Digital Video Transmitter View

DVI Compliancy and Dual Channel Support Numerous Applications

Conexant’s broadband communications portfolio includes a comprehensive suite of semiconductor SOLUTIONs that enable the digital home and information network. Compliant with the Digital Visual Interface (DVI) industry specification, the CX25894/5/6 family of high performance, SINGLE-CHIP transmitters offers single or dual link output. Supporting up to two independent concurrent channels and two serial interfaces, this device is well suited for desktop PCs or any application that drives digital or flat panel displays.

Distinguishing Features
• Two independent channels (CX25895/6), providing simultaneous operation at different reSOLUTIONs
• Low, mid and high-end SOLUTIONs for varied customer applications
• Lowest cost SOLUTION and component count requiring smaller layout space
• HDCP 1.0 copy protection to secure digital entertainment content over DVI
• Compatible with industry standard DVI receivers, DVI 1.0 compliant
• Programmable impedance matching to work with marginal or non-compliant receivers
• Pin compatibility among all series members

1

2345678910 Next

All Rights Reserved © datasheetbank.com 2014 - 2020 [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]