datasheetbank_Logo     Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

P/N + Description + Content Search

Search Words :

Part Name(s) : TMP112 TMP112AIDRLR TMP112AIDRLT TI
Texas Instruments
Description : HIGH-ACCURACY, LOW-POWER, DIGITAL TEMPERATURE SENSOR WITH SMBus?/Two-Wire SERIAL INTERFACE IN SOT563 View

Description
The TMP112 device is a DIGITAL TEMPERATURE SENSOR ideal for NTC/PTC thermistor replacement where high accuracy is required. The device offers an accuracy of ±0.5°C WITHout requirINg calibration or external component signal conditionINg. IC TEMPERATURE SENSORs are highly lINear and do not require complex calculations or lookup tables to derive the TEMPERATURE. The calibratINg for improved accuracy feature allows users to calibrate for an accuracy as good as ±0.17°C (see the CalibratINg for Improved Accuracy section). The on-chip 12-bit ADC offers
resolutions down to 0.0625°C.

 Features
SOT563 Package (1.6 mm × 1.6 mm) is 68% smaller footprINt than SOT23
• Accuracy WITHout Calibration:
– 0.5°C (max) from 0°C to +65°C
– 1.0°C (max) from –40°C to +125°C
• Low Quiescent Current:
– 10μA Active (max), 1μA Shutdown (max)
• Supply Range: 1.4V to 3.6V
• Resolution: 12 Bits
DIGITAL Output: SMBus™, Two-Wire and I2C INTERFACE Compatibility

Part Name(s) : TMP102 TMP102AIDRLR TMP102AIDRLT BB
Burr-Brown -> Texas Instruments
Description : Low Power DIGITAL TEMPERATURE SENSOR WITH SMBus?/Two-Wire SERIAL INTERFACE IN SOT563 View

DESCRIPTION
The TMP102 is a two-wire, SERIAL output TEMPERATURE SENSOR available IN a tINy SOT563 package. RequirINg no external components, the TMP102 is capable of readINg TEMPERATUREs to a resolution of 0.0625°C.

FEATURES
• TINY SOT563 PACKAGE
• ACCURACY: 0.5°C (–25°C to +85°C)
• LOW QUIESCENT CURRENT: 10μA Active (max) 1μA Shutdown (max)
• SUPPLY RANGE: 1.4V to 3.6V
• RESOLUTION: 12 Bits
DIGITAL OUTPUT: Two-Wire SERIAL INTERFACE

APPLICATIONS
• PORTABLE AND BATTERY-POWERED APPLICATIONS
• POWER-SUPPLY TEMPERATURE MONITORING
• COMPUTER PERIPHERAL THERMAL PROTECTION
• NOTEBOOK COMPUTERS
• BATTERY MANAGEMENT
• OFFICE MACHINES
• THERMOSTAT CONTROLS
• ELECTROMECHANICAL DEVICE TEMPERATURES
• GENERAL TEMPERATURE MEASUREMENTS: INdustrial Controls Test Equipment Medical INstrumentations

Part Name(s) : TMP102 HPA00330AIDRLR HPA00330AIDRLRG4 TMP102AIDRLR TMP102AIDRLRG4 TMP102AIDRLT TMP102AIDRLTG4 TI
Texas Instruments
Description : LOW-POWER DIGITAL TEMPERATURE SENSOR WITH SMBus and Two-Wire SERIAL INTERFACE IN SOT563 View

Description
The TMP102 device is a DIGITAL TEMPERATURE SENSOR ideal for NTC/PTC thermistor replacement where high accuracy is required. The device offers an accuracy of ±0.5°C WITHout requirINg calibration or external component signal conditionINg. Device TEMPERATURE SENSORs are highly lINear and do not require complex calculations or lookup tables to derive the TEMPERATURE. The on-chip 12-bit ADC offers resolutions down to 0.0625°C.

Features
SOT563 Package (1.6-mm × 1.6-mm) is a 68% Smaller FootprINt than SOT-23
• Accuracy WITHout Calibration:
    – 2.0°C (max) from –25°C to 85°C
    – 3.0°C (max) from –40°C to 125°C
• Low Quiescent Current:
    – 10-μA Active (max)
    – 1-μA Shutdown (max)
• Supply Range: 1.4 to 3.6 V
• Resolution: 12 Bits
DIGITAL Output: SMBus™, Two-Wire, and I2C INTERFACE Compatibility
• NIST Traceable

Applications
• Portable and Battery-Powered Applications
• Power-supply TEMPERATURE MonitorINg
• Computer Peripheral Thermal Protection
• Notebook Computers
• Battery Management
• Office MachINes
• Thermostat Controls
• Electromechanical Device TEMPERATUREs
• General TEMPERATURE Measurements:
    – INdustrial Controls
    – Test Equipment
    – Medical INstrumentations

Part Name(s) : TMP102 HPA00330AIDRLR HPA00330AIDRLRG4 TMP102AIDRLR TMP102AIDRLRG4 TMP102AIDRLT TMP102AIDRLTG4 Texas-Instruments
Texas Instruments
Description : LOW-POWER DIGITAL TEMPERATURE SENSOR WITH SMBus and Two-Wire SERIAL INTERFACE IN SOT563 View

Description
The TMP102 device is a DIGITAL TEMPERATURE SENSOR ideal for NTC/PTC thermistor replacement where high accuracy is required. The device offers an accuracy of ±0.5°C WITHout requirINg calibration or external component signal conditionINg. Device TEMPERATURE SENSORs are highly lINear and do not require complex calculations or lookup tables to derive the TEMPERATURE. The on-chip 12-bit ADC offers resolutions down to 0.0625°C.

Features
SOT563 Package (1.6-mm × 1.6-mm) is a 68% Smaller FootprINt than SOT-23
• Accuracy WITHout Calibration:
    – 2.0°C (max) from –25°C to 85°C
    – 3.0°C (max) from –40°C to 125°C
• Low Quiescent Current:
    – 10-μA Active (max)
    – 1-μA Shutdown (max)
• Supply Range: 1.4 to 3.6 V
• Resolution: 12 Bits
DIGITAL Output: SMBus, Two-Wire, and I2C INTERFACE Compatibility
• NIST Traceable

Applications
• Portable and Battery-Powered Applications
• Power-supply TEMPERATURE MonitorINg
• Computer Peripheral Thermal Protection
• Notebook Computers
• Battery Management
• Office MachINes
• Thermostat Controls
• Electromechanical Device TEMPERATUREs
• General TEMPERATURE Measurements:
    – INdustrial Controls
    – Test Equipment
    – Medical INstrumentations


Part Name(s) : MAX1618 MAX1618MUB MaximIC
Maxim Integrated
Description : Remote TEMPERATURE SENSOR WITH SMBus SERIAL INTERFACE View

General Description
The MAX1618 precise DIGITAL thermometer reports the TEMPERATURE of a remote SENSOR. The remote SENSOR is a diode-connected transistor—typically a low-cost, easily mounted 2N3904 NPN type—that replaces conventional thermistors or thermocouples. Remote accuracy is ±3°C for multiple transistor manufacturers, WITH no calibration needed. The MAX1618 can also measure the die TEMPERATURE of other ICs, such as microprocessors, that contaIN an on-chip, diode-connected transistor.

Features
♦ SINgle Channel: Measures Remote CPU TEMPERATURE
♦ No Calibration Required
♦ SMBus 2-Wire SERIAL INTERFACE
♦ Programmable Under/OverTEMPERATURE Alarms
♦ OverTEMPERATURE Output for Fan Control (Thermostat Mode)
♦ Supports SMBus Alert Response Accuracy
    ±3°C (+60°C to +100°C)
    ±5°C (-55°C to +120°C)
♦ 3µA (typ) Standby Supply Current
♦ 900µA (max) Supply Current IN Autoconvert Mode
♦ +3V to +5.5V Supply Range
♦ Small 10-PIN µMAX Package

Applications
    Desktop and Notebook Computers
    Smart Battery Packs
    LAN Servers
    INdustrial Controls
    Central Office Telecom Equipment
    Test and Measurement
    Multichip Modules

Part Name(s) : MAX1669 MAX1669EEE MaximIC
Maxim Integrated
Description : Fan Controller and Remote TEMPERATURE SENSOR WITH SMBus SERIAL INTERFACE View

General Description
The MAX1669 fan controller INcludes a precise DIGITAL thermometer that reports the TEMPERATURE of a remote SENSOR. The remote SENSOR is a diode-connected transistor—typically a low-cost, easily mounted 2N3906 PNP type—replacINg conventional thermistors or thermocouples. Remote accuracy is ±3°C for transistors from multiple manufacturers, WITH no calibration needed. The MAX1669 has an INdependent fan controller WITH a low current logic output requirINg external power components to INTERFACE to a DC brushless fan. The fan controller has two modes of operation: a low-frequency (20Hz to 160Hz) PWM mode INtended for drivINg the fan motor, or a high-impedance DAC output that generates a variable DC control voltage. IN PWM mode, the FAN frequency can be synchronized to an external clock.

Features
♦ Measures Remote CPU TEMPERATURE
♦ No Calibration Required
♦ 20Hz to 160Hz PWM Output for Fan
♦ PWM Frequency Sync INput (260kHz)
♦ Flexible Fan INTERFACE: LINear or PWM
♦ SMBus 2-Wire SERIAL INTERFACE
♦ Programmable Under/OverTEMPERATURE Alarms
♦ ALERT Latched INterrupt Output
♦ OVERT Thermostat Output
♦ Two GPIO PINs
♦ Write-Once Configuration Protection
♦ Supports SMBus Alert Response
♦ ±3°C TEMPERATURE Accuracy (-40°C to +125°C, remote)
♦ 3µA Standby Supply Current
♦ +3V to +5.5V Supply Range
♦ Small 16-PIN QSOP Package

Applications
    Pentium® CPU CoolINg
    Desktop Computers
    Notebook Computers
    Servers
    Workstations

Part Name(s) : LM90 LM90CIMM LM90CIMMX National-Semiconductor
National ->Texas Instruments
Description : 3?C Accurate, Remote Diode and Local DIGITAL TEMPERATURE SENSOR WITH Two-Wire INTERFACE View

General Description
The LM90 is an 11-bit DIGITAL TEMPERATURE SENSOR WITH a 2-wire System Management Bus (SMBus) SERIAL INTERFACE. The LM90 accurately measures its own TEMPERATURE as well as the TEMPERATURE of an external device, such as processor thermal diode or diode connected transistor such as the 2N3904. The TEMPERATURE of any ASIC can be accurately determINed usINg the LM90 as long as a dedicated diode (semiconductor junction) is available on the target die.

Part Name(s) : MAX1619 MAX1619MEE MaximIC
Maxim Integrated
Description : Remote/Local TEMPERATURE SENSOR WITH Dual Alarm Outputs and SMBus SERIAL INTERFACE View

General Description
The MAX1619 is a precise DIGITAL thermometer that reports the TEMPERATURE of both a remote SENSOR and its own package. The remote SENSOR is a diode-connected transistor—typically a low-cost, easily mounted 2N3904 NPN type—that replaces conventional thermistors or thermocouples. Remote accuracy is ±3°C for multiple transistor manufacturers, WITH no calibration needed. The remote channel can also measure the die TEMPERATURE of other ICs, such as microprocessors, that contaIN an on-chip, diode-connected transistor.

Features
♦ Two Channels Measure Both Remote and Local
   TEMPERATUREs
♦ No Calibration Required
♦ SMBus 2-Wire SERIAL INTERFACE
♦ Programmable Under/OverTEMPERATURE Alarms
♦ OVERT Output for Fan Control
♦ Supports SMBus Alert Response
♦ Supports Manufacturer and Device ID Codes
♦ Accuracy
   ±2°C (+60°C to +100°C, local)
   ±3°C (-40°C to +125°C, local)
   ±3°C (+60°C to +100°C, remote)
♦ 3µA (typ) Standby Supply Current
♦ 70µA (max) Supply Current IN Auto-Convert Mode
♦ +3V to +5.5V Supply Range
♦ Write-Once Protection
♦ Small 16-PIN QSOP Package

Applications
   Desktop and Notebook Computers
   Central Office Telecom Equipment
   Smart Battery Packs
   Test and Measurement
   LAN Servers
   Multichip Modules
   INdustrial Controls

Part Name(s) : HDC1008 HDC1008YPAR HDC1008YPAT TI
Texas Instruments
Description : Low Power, High Accuracy DIGITAL Humidity SENSOR WITH TEMPERATURE SENSOR View

Description
The HDC1008 is a DIGITAL humidity SENSOR WITH INtegrated TEMPERATURE SENSOR that provides excellent measurement accuracy at very low power. The device measures humidity based on a novel capacitive SENSOR. The humidity and TEMPERATURE SENSORs are factory calibrated. The INnovative WLCSP (Wafer Level Chip Scale Package) simplifies board design WITH the use of an ultra-compact package. The sensINg element of the HDC1008 is placed on the bottom part of the device, which makes the HDC1008 more robust agaINst dirt, dust, and other environmental contamINants. The HDC1008 is functional WITHIN the full -40°C to +125°C TEMPERATURE range.

Features
• Relative Humidity (RH) OperatINg Range 0% to
   100%
• 14 Bit Measurement Resolution
• Relative Humidity Accuracy ±4%
TEMPERATURE Accuracy ±0.2 °C
• 200 nA Sleep Mode Current
• Average Supply Current:
   – 820 nA @ 1sps, 11 bit RH Measurement
   – 1.2 µA @ 1sps, 11 bit RH and TEMPERATURE
      Measurement
• Supply Voltage 3 V to 5 V
• TINy 2 mm x 1.6 mm Device FootprINt
• I2C INTERFACE

Applications
• HVAC
• Smart Thermostats and Room Monitors
• White Goods
• PrINters
• Handheld Meters
• Medical Devices
• Cargo ShippINg
• Automotive WINdshield Defog
• Wearable Devices
• Mobile Devices

1

2345678910 Next

All Rights Reserved © datasheetbank.com 2014 - 2020 [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]