datasheetbank_Logo     Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

P/N + Description + Content Search

Search Words :

Part Name(s) : 50.12.9.005.1 50.12.9.006.1 50.12.9.012.1 50.12.9.024.1 50.12.9.048.1 50.12.XXXXX ETC
Unspecified
Description : PCB Relay with forcibly guided CONTACTS according to EN 50205 TYPE B 2 CO CONTACTS max View

Features
HIGH physical separation BETWEEN adjacent CONTACTS
• Cadmium Free contact materials
• 8 mm, 6 KV (1.2/50 µs) ISolatio, coil-CONTACTS
• Flux proof: RT II
• 2 Pole 8 A
• 5 mm pinning
• PCB mounting

Part Name(s) : TXD2-1.5V TXD2-1.5V-X TXD2-1.5V-Z TXD2-1.5V-1 TXD2-1.5V-1-X TXD2-1.5V-1-Z TXD2-1.5V-3 TXD2-1.5V-3-X TXD2-1.5V-3-Z TXD2-1.5V-4 TXD2-1.5V-4-X TXD2-1.5V-4-Z TXD2-1.5V-6 TXD2-1.5V-6-X TXD2-1.5V-6-Z TXD2-1.5V-7 TXD2-1.5V-7-X TXD2-1.5V-7-Z TXD2-3V TXD2-3V-X TXD2-3V-Z TXD2-3V-1 TXD2-3V-1-X TXD2-3V-1-Z TXD2-3V-3 Panasonic
Panasonic Corporation
Description : HIGH BREAKDOWN VOLTAGE TYPE IS AVAILABLE (1.5 KV BETWEEN OPEN CONTACTS) TX-D RELAYS View

FEATURES
1. Lineup now includes HIGH BREAKDOWN VOLTAGE TYPE that achieves BREAKDOWN VOLTAGE
   BETWEEN OPEN CONTACTS of 1,500 VAC.
      Surge BREAKDOWN VOLTAGE BETWEEN OPEN CONTACTS:
         1,500 V 10 × 160 µsec. (FCC part 68)
      Surge BREAKDOWN VOLTAGE BETWEEN contact and coil:
         6,000 V 1.2 × 50 µsec. (EN60950)
2. Approved to the supplementary insulation class in the EN standards(EN60950).
   The insulation dIStance BETWEEN the
   contact and coil meet the
   supplementary insulation class of the
   EN60950 standards as required for
   equipment connected to the telephone
   lines in Europe.
   SatISfies the following conditions:
      • Clearances: 2.0 mm .079 inch or more
      • Creepage dIStance: 2.5 mm .098 inch or more
3. 3,000 V BREAKDOWN VOLTAGE BETWEEN
   contact and coil. (Surge BREAKDOWN VOLTAGE 6,000 V TYPE)
   The body block construction of the coil
   that IS sealed formation offers a HIGH
   BREAKDOWN VOLTAGE of 3,000 V BETWEEN
   contact and coil.
4. Nominal operating power:
   HIGH sensitivity of 200mW
   By using the HIGHly efficient polar
   magnetic circuit “seesaw balance
   mechanISm”, a nominal operating
   power of 200 mW has been achieved.
5. HIGH contact capacity: 2 A 30 V DC
6. HIGH contact reliability achieved with gold-clad crossbar
   twin CONTACTS and the use of gas expelling materials during formation.
      *We also offer a range of products with
         AgPd CONTACTS suitable for use in low
         level load analog circuits (Max. 10V DC 10 mA).
      *SX relays designed for low level loads are also AVAILABLE.
         (Surge BREAKDOWN VOLTAGE 2,500 V TYPE only)
7. Outstanding vibration and shock resIStance.
   Functional shock resIStance: 750 m/s2
   Destructive shock resIStance: 1,000 m/s2
   Functional vibration resIStance:
      10 to 55 Hz (at double amplitude of 3.3 mm .130 inch)
   Destructive vibration resIStance:
      10 to 55 Hz (at double amplitude of 5 mm .197 inch)
8. Sealed construction allows automatic washing.
9. A range of surface-mount TYPEs IS also AVAILABLE.
   SA: Low-profile surface-mount terminal TYPE
   SL: HIGH connection reliability surface mount terminal TYPE
   SS: Space saving surface-mount terminal TYPE
10. M.B.B. TYPE AVAILABLE (Surge BREAKDOWN VOLTAGE 2,500 V TYPE only)

TYPICAL APPLICATIONS
1. Facsimile
2. Modem
3. Communications (xDSL)
4. Medical equipment
5. Automotive equipment
6. Security

Part Name(s) : TPD2E001-Q1 TPD2E001IDRLRQ1 TI
Texas Instruments
Description : LOW-CAPACITANCE 2-CHANNEL 15-KV ESD-PROTECTION ARRAY FOR HIGH-SPEED DATA INTERFACES View

DESCRIPTION/ORDERING INFORMATION
The TPD2E001 IS a low-capacitance ±15-KV ESD-protection diode array designed to protect sensitive electronics attached to communication lines. Each channel consISts of a pair of diodes that steer ESD current pulses to VCC or GND. The TPD2E001 protects against ESD pulses up to ±15-KV Human-Body Model (HBM), ±8-KV Contact DIScharge, and ±15-KV Air-Gap DIScharge, as specified in IEC 61000-4-2. ThIS device has a 1.5-pF capacitance per channel, making it ideal for use in HIGH-speed data IO interfaces.

FEATURES
• Qualified for Automotive Applications
• ESD Protection Exceeds
    – ±15-KV Human-Body Model (HBM)
    – ±8-KV IEC 61000-4-2 Contact DIScharge
    – ±15-KV IEC 61000-4-2 Air-Gap DIScharge
• Low 1.5-pF Input Capacitance
• Low 1-nA (Max) Leakage Current
• 0.9-V to 5.5-V Supply-VOLTAGE Range
• Two-Channel Device
• Space-Saving DRL Package
• Alternate 3-, 4-, 6-Channel Options AVAILABLE: TPD3E001, TPD4E001, and TPD6E001

Part Name(s) : A26LV32EMP AM26LV32E-EP AM26LV32EMDREP V62/09602-01XE TI
Texas Instruments
Description : LOW-VOLTAGE HIGH-SPEED QUADRUPLE DIFFERENTIAL LINE RECEIVER WITH 15-KV IEC ESD PROTECTION View

DESCRIPTION/ORDERING INFORMATION
The AM26LV32E consISts of quadruple differential line receivers with 3-state outputs. These differential receivers have ±15-KV ESD (HBM and IEC61000-4-2, Air-Gap DIScharge) and ±8-KV ESD (IEC61000-4-2, Contact DIScharge) protection for RS422 bus pins.
ThIS device IS designed to meet TIA/EIA-422-B and ITU recommendation V.11 drivers with reduced supply VOLTAGE. The device IS optimized for balanced bus transmISsion at switching rates up to 32 MHz. The 3-state outputs permit connection directly to a bus-organized system.
The AM26LV32E has an internal fail-safe circuitry that prevents the device from putting an unknown VOLTAGE signal at the receiver outputs. In the OPEN fail-safe, shorted fail-safe, and terminated fail-safe, a HIGH state IS produced at the respective output.
ThIS device IS supported for partial-power-down applications using Ioff. Ioff circuitry dISables the outputs, preventing damaging current backflow through the device when it IS powered down.
The AM26LV32EM IS characterized for operation from –55°C to 125°C.

FEATURES
• Meets or Exceeds Standard TIA/EIA-422-B and
   ITU Recommendation V.11
• Operates From a Single 3.3-V Power Supply
• ESD Protection for RS422 Bus Pins
   – ±15-KV Human-Body Model (HBM)
   – ±8-KV IEC61000-4-2, Contact DIScharge
   – ±15-KV IEC61000-4-2, Air-Gap DIScharge
• Switching Rates up to 32 MHz
• Low Power DISsipation: 27 mW Typ
OPEN-Circuit, Short-Circuit, and Terminated
   Fail-Safe
• ±7-V Common-Mode Input VOLTAGE Range With
   ±200-mV Sensitivity
• Accepts 5-V Logic Inputs With 3.3-V Supply
   (Enable Inputs)
• Input HysteresIS: 35 mV Typ
• Pin-to-Pin Compatible With AM26C32,
   AM26LS32
• Ioff Supports Partial-Power-Down Mode
   Operation

SUPPORTS DEFENSE, AEROSPACE,
AND MEDICAL APPLICATIONS
• Controlled Baseline
• One Assembly/Test Site
• One Fabrication Site
AVAILABLE in Military (–55°C/125°C)
   Temperature Range (1)
• Extended Product Life Cycle
• Extended Product-Change Notification
• Product Traceability


Part Name(s) : AM26LV31E-EP AM26LV31ESDREP V62/09603-01XE A26LV31ESP TI
Texas Instruments
Description : LOW-VOLTAGE HIGH-SPEED QUADRUPLE DIFFERENTIAL LINE DRIVER WITH 15-KV IEC ESD PROTECTION View

DESCRIPTION/ORDERING INFORMATION
The AM26LV31E IS a quadruple differential line driver with 3-state outputs. ThIS driver has ±15-KV ESD (HBM and IEC61000-4-2, Air-Gap DIScharge) and ±8-KV ESD (IEC61000-4-2, Contact DIScharge) protection. ThIS device IS designed to meet TIA/EIA-422-B and ITU Recommendation V.11 drivers with reduced supply VOLTAGE.
The device IS optimized for balanced-bus transmISsion at switching rates up to 32 MHz. The outputs have HIGH current capability for driving balanced lines, such as twISted-pair transmISsion lines, and provide a HIGH impedance in the power-off condition.
The AM26LV31ES IS characterized for operation from –55°C to 105°C.

FEATURES
• Meets or Exceeds Standards TIA/EIA-422-B and ITU Recommendation V.11
• Operates From a Single 3.3-V Power Supply
• ESD Protection for RS422 Bus Pins
   – ±15-KV Human-Body Model (HBM)
   – ±8-KV IEC61000-4-2, Contact DIScharge
   – ±15-KV IEC61000-4-2, Air-Gap DIScharge
• Switching Rates up to 32 MHz
• Propagation Delay Time . . . 8 ns Typ
• Pulse Skew Time . . . 500 ps Typ
HIGH Output-Drive Current . . . ±30 mA
• Controlled RISe and Fall Times . . . 5 ns Typ
• Differential Output VOLTAGE With 100-Ω Load . . . 2.6 V Typ
• Accepts 5-V Logic Inputs With 3.3-V Supply
• Ioff Supports Partial-Power-Down Mode Operation
• Driver Output Short-Protection Circuit
• Glitch-Free Power-Up/Power-Down Protection

SUPPORTS DEFENSE, AEROSPACE, AND MEDICAL APPLICATIONS
• Controlled Baseline
• One Assembly/Test Site
• One Fabrication Site
AVAILABLE in Extended (–55°C/105°C) Temperature Range(1)
• Extended Product Life Cycle
• Extended Product-Change Notification
• Product Traceability

Part Name(s) : 26LV31EI AM26LV31E AM26LV31EI AM26LV31EID AM26LV31EIDR AM26LV31EIDRG4 AM26LV31EINS AM26LV31EINSR AM26LV31EIPW AM26LV31EIPWR AM26LV31EIPWRG4 AM26LV31EIRGY AM26LV31EIRGYR AM26LV31EIRGYRG4 SB31 TI
Texas Instruments
Description : Low-VOLTAGE HIGH-Speed Quadruple Differential Line Driver With 15-KV IEC ESD Protection View

Description
The AM26LV31E IS a quadruple differential line driver with 3-state outputs. ThIS driver has ±15-KV ESD (HBM and IEC61000-4-2, Air-Gap DIScharge) and ±8-KV ESD (IEC61000-4-2, Contact DIScharge) protection. ThIS device IS designed to meet TIA/EIA-422-B and ITU Recommendation V.11 drivers with reduced supply VOLTAGE.
The device IS optimized for balanced-bus transmISsion at switching rates up to 32 MHz. The outputs have HIGH current capability for driving balanced lines, such as twISted-pair transmISsion lines, and provide a HIGH impedance in the power-off condition.
The AM26LV31EI IS characterized for operation from –40°C to +85°C.

Features
• Meets or Exceeds Standards TIA/EIA-422-B and
   ITU Recommendation V.11
• Operates From a Single 3.3-V Power Supply
• ESD Protection for RS422 Bus Pins
   – ±15-KV Human-Body Model (HBM)
   – ±8-KV IEC61000-4-2, Contact DIScharge
   – ±15-KV IEC61000-4-2, Air-Gap DIScharge
• Switching Rates Up to 32 MHz
• Propagation Delay Time: 8 ns Typical
• Pulse Skew Time: 500 ps Typical
HIGH Output-Drive Current: ±30 mA
• Controlled RISe and Fall Times: 5 ns Typical
• Differential Output VOLTAGE With 100-Ω
   Load: 2.6 V Typical
• Accepts 5-V Logic Inputs With 3.3-V Supply
• Ioff Supports Partial-Power-Down Mode Operation
• Driver Output Short-Protection Circuit
• Glitch-Free Power-Up and Power-Down Protection
• Package Options: SO, SOIC, TSSOP, VQFN

Applications
• Motor Drives
• Space Avionics and Defense
• Medical Healthcare and Fitness
• Wireless Infrastructure
• Factory Automation and Control

Part Name(s) : TPD4E101 TPD4E101DPWR TI
Texas Instruments
Description : 4-Channel Bidirectional Low Capacitance ESD Protection Device with 15-KV Contact and Ultra-Low Clamping VOLTAGE View

Description
The TPD4E101 device IS a four-channel electrostatic dIScharge (ESD) transient VOLTAGE suppression (TVS) diode array in an ultra small 0.8-mm × 0.8-mm package. ThIS TVS protection device offers ±15-KV contact ESD, ±15-KV IEC air-gap protection, and has four back-to-back TVS diodes for bipolar or bidirectional signal support. The 4.8-pF typical line capacitance of thIS ESD protection diode array IS suitable for a wide range of applications supporting data rates up to 700 Mbps. The DPW package IS convenient for component placement in space constrained applications and the 0.48-mm pitch helps save on PCB manufacturing costs.
Typical applications of thIS ESD protection device are circuit protection for SIM cards, audio lines (microphones, earphones, and speakerphones), SD interfaces and pushbuttons. ThIS ESD clamp IS good for providing protection in end-equipment like cell phones, portable media players, wearables, set-top boxes, and eBooks.

Features
• Provides System-Level ESD Protection for Low
   VOLTAGE I/O Interface
• IEC 61000-4-2 Level 4 ESD Protection
   – ±15-KV Contact DIScharge
   – ±15-KV Air-Gap DIScharge
• IEC 61000-4-5 (Surge): 3 A (8/20 µs)
• I/O Capacitance 4.8 pF (Typical)
• Dynamic ResIStance 0.45 Ω (Typical)
• DC BREAKDOWN VOLTAGE ±6 V (Minimum)
• Ultra-Low Leakage Current 100 nA (Maximum)
   Overtemperature
• 10-V Clamping VOLTAGE (Maximum at IPP = 1 A)
• Industrial Temperature Range: –40°C to +125°C
• Space Saving DPW package (0.8-mm × 0.8-mm)

Applications
• End Equipment:
   – Cell Phones
   – Portable Media Players
   – Wearables
   – Set-Top Boxes
   – eBooks
• Interfaces:
   – SIM Card Interfaces
   – Audio Lines
   – SD Interfaces
   – Push-Buttons

Part Name(s) : 45985-4161 0459854161 Molex
Molex Connectors
Description : 1.27mm (.050"), 12.00mm (.472") Pitch, EXTreme LPHPower? Header, Right Angle, 4 Power CONTACTS, 32 Signal CONTACTS View

Description: 1.27mm (.050"), 12.00mm (.472") Pitch, EXTreme LPHPower™ Header, Right Angle, 4 Power CONTACTS, 32 Signal CONTACTS, Select Gold (Au) Plating, for 3.18mm (.125") Thick PC Board

Part Name(s) : MAX3318E MP318EC MP318EI MAX3318ECDB MAX3318ECDBR MAX3318ECPW MAX3318ECPWR MAX3318EIDB MAX3318EIDBG4 MAX3318EIDBR MAX3318EIDBRG4 MAX3318EIPW MAX3318EIPWG4 MAX3318EIPWR MAX3318EIPWRG4 TI
Texas Instruments
Description : 2.5-V 460-kbps RS-232 TRANSCEIVER WITH 15-KV ESD PROTECTION View

DESCRIPTION
The MAX3318E IS a dual-driver, dual-receiver, RS-232-compatible transceiver. The device features auto-power-down plus and enhanced electrostatic dIScharge (ESD) protection integrated into the chip. Driver output and receiver input are protected to ±15 KV using the IEC 61000-4-2 Air-Gap DIScharge method, ±8 KV using the IEC 61000-4-2 Contact DIScharge method, and ±15 KV using the Human-Body Model (HBM).

FEATURES
• ESD Protection for RS-232 I/O Pins
   – ±15 KV (Human-Body Model)
   – ±8 KV (IEC 61000-4-2, Contact DIScharge)
   – ±15 KV (IEC 61000-4-2, Air-Gap DIScharge)
• 300-μA Operating Supply Current
• 1-μA Low-Power Standby (With Receivers
   Active) Mode
• Designed to Transmit at a Data Rate of
   460 kbps
• Auto-Power-Down Plus Option Features
   Flexible Power-Saving Mode
• Operates From a Single 2.25-V to 3-V VCC
   Supply

APPLICATIONS
• Battery-Powered Systems
• PDAs
• Cellular Phones
• Notebooks
• Hand-Held Equipment
• Pagers

1

2345678910 Next

All Rights Reserved © datasheetbank.com 2014 - 2019 [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]