datasheetbank_Logo     Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

P/N + Description + Content Search

Search Words :

Part Name(s) : PS9711 PS9711-E3 PS9711-E4 PS9711-F3 PS9711-F4 CEL
California Eastern Laboratories.
Description : HIGH NOISE REDUCTION/HIGH SPEED 10 Mbps, TOTEM-POLE OUTPUT TYPE 5 PIN SOP TOM OPTOCOUPLER View

DESCRIPTION
The PS9711 is an optically coupled HIGH SPEED totem pole isolator containing a GaAIAs LED on the light emitting diode side (input side) and a photodiode and a signal processing circuit on the light receiving side (OUTPUT side) on one chip. It is housed in a plastic SOP (Small Out-Line Package) for HIGH density applications.

FEATURES
HIGH COMMON MODE TRANSIENT IMMUNITY
    CMH, CML: ±10 kV/µs TYP
• SMALL PACKAGE
    5 PIN SOP
HIGH SPEED RESPONSE
    tPHL = 30 ns, tPLH = 35 ns TYP
• PULSE WIDTH DISTORTION
    |tPHL-tPLH| = 7 ns TYP
• TOTEM-POLE OUTPUT
    No Pull-up resistor required
• TAPE AND REEL AVAILABLE

APPLICATIONS
• COMPUTER AND PERIPHERAL DEVICES
• MEASUREMENT EQUIPMENT
• POWER SUPPLY

Part Name(s) : PS8701 PS8701-E3 PS8701-E4 PS8701-F3 PS8701-F4 CEL
California Eastern Laboratories.
Description : HIGH NOISE REDUCTION HIGH SPEED ANALOG OUTPUT 5 PIN SOP OPTOCOUPLER View

DESCRIPTION
The PS8701 is an optically coupled isolator containing a GaAIAs LED on the light emitting diode (input) side and a PIN photodiode and a HIGH SPEED amplifier transistor on the OUTPUT side on one chip. Its small package makes it ideal for HIGH density circuits and applications.

FEATURES
HIGH COMMON MODE TRANSISENT IMMUNITY: CMH,CML: ±10 kV/µs MIN
HIGH ISOLATION VOLTAGE: BV: 2500 Vr.m.s.
HIGH SUPPLY VOLTAGE: VCC = 35 V
HIGH SPEED RESPONSE: tPHL = 0.8 µs MAX, tPLH = 1.2 µs MAX
• AVAILABLE IN TAPE AND REEL: PS8701-E3, E4, F3, F4

APPLICATIONS
• COMPUTERS AND PERIPHERALS
• GENERAL PURPOSE INVERTER
• POWER SUPPLIES
• RELAY AND PULSE TRANSFORMER REPLACEMENTS

Part Name(s) : PS8701-E3 PS8701-E4 PS8701-F3 PS8701-F4 PS8701 NEC
NEC => Renesas Technology
Description : HIGH NOISE REDUCTION HIGH-SPEED ANALOG OUTPUT TYPE 5-PIN SOP PHOTOCOUPLER View

DESCRIPTION
The PS8701 is an optically coupled isolator containing a GaAlAs LED on the light emitting diode (input side) and a PIN photodiode and a HIGH-SPEED amplifier transistor on the OUTPUT side on one chip.
This is a plastic SOP (Small Out-line Package) type for HIGH density applications.

FEATURES
HIGH common mode transient immunity (CMH, CML = ±10 kV/µs MIN.)
HIGH supply voltage (VCC = 35 V)
HIGH isolation voltage (BV = 2 500 Vr.m.s.)
HIGH-SPEED response (tPHL = 0.8 µs MAX., tPLH = 1.2 µs MAX.)
• TaPINg product number (PS8701-E3, E4, F3, F4)

APPLICATIONS
• Computer and peripheral manufactures
• General purpose inverter
• Substitutions for relays and pulse transformers
• Power supply

Part Name(s) : PS9711 PS9711-E3 PS9711-E4 PS9711-F3 PS9711-F4 NEC
NEC => Renesas Technology
Description : HIGH NOISE REDUCTION/HIGH-SPEED 10 Mbps, TOTEM-POLE OUTPUT TYPE 5-PIN SOP TOM PHOTOCOUPLER View

DESCRIPTION
The PS9711 is an optically coupled HIGH-SPEED, totem-pole OUTPUT isolator containing a GaAlAs LED on light emitting diode (input) and a photodiode and a signal processing circuit on light receiving side (OUTPUT side) on one chip.

FEATURES
HIGH common mode transient immunity (CMH, CML = ±10 kV/µs TYP.)
• Small package (5-PIN SOP)
HIGH-SPEED response (tPHL = 30 ns, tPLH = 35 ns TYP.)
• Pulse width distortion (tPHL – tPLH = 7 ns TYP.)
• Totem-pole OUTPUT (No pull-up resistor required)
• Ordering number of taPINg product: PS9711-E3, E4: 900 pcs/reel, PS9711-F3, F4 (Recommended): 3 500 pcs/reel

APPLICATIONS
• Computer and peripheral manufactures
• Measurement equipment
• PDP


Part Name(s) : VOM452T VOM453T Vishay
Vishay Semiconductors
Description : ANALOG HIGH SPEED OPTOCOUPLER, 1 MBd, Transistor OUTPUT, SOP-5 Package View

DESCRIPTION
The VOM452T and VOM453T, HIGH SPEED OPTOCOUPLERs, each consists of a GaAlAs infrared emitting diode, optically coupled with an integrated photo detector and a HIGH SPEED transistor. The photo detector isjunction isolated from the transistor to reduce miller capacitance effects. The open  collector OUTPUT function allows circuit designers to adjust the load conditions when interfacing with different logic systems such as TTL, CMOS, etc.

FEATURES
• Surface mountable
• Industry standard SOP-5 footprint
• Compatible with infrared vapor phase reflow and wave soldering processes
• Isolation test voltage, 3750 VRMS
• Very HIGH common mode transient immunity:
  15 000 V/µs at VCM= 1500 V guaranteed (VOM453T)
HIGH SPEED: 1 MBd
• TTL compatible
• Open collector OUTPUT
• Compliant to RoHS directive 2002/95/EC and in accordance to WEEE 2002/96/EC

APPLICATIONS
• Fieldbus communication and control
• Logic ground isolation
ANALOG signal ground isolation
• Replace pulse transformers

Part Name(s) : FOD8320 FOD8320R2 FOD8320R2V FOD8320V Fairchild
Fairchild Semiconductor
Description : HIGH NOISE Immunity, 2.5A OUTPUT Current, Gate Drive OPTOCOUPLER in Optoplanar Wide Body SOP 5-PIN View

Description
The FOD8320 is a 2.5A OUTPUT Current Gate Drive OPTOCOUPLER, capable of driving medium power IGBT/MOSFETs. It is ideally suited for fast switching driving of power IGBT and MOSFETs used in motor control inverter applications, and HIGH performance power systems.
It utilizes Fairchild’s coplanar packaging technology, Optoplanar®, and optimized IC design to achieve reliably HIGH insulation voltage and HIGH NOISE immunity.
It consists of a aluminum gallium arsenide (AlGaAs) light emitting diode optically coupled to an integrated circuit with a HIGH-SPEED driver for push-pull MOSFET OUTPUT stage. The device is housed in a wide body 5-PIN small outline plastic package.

Features
■ Fairchild’s Optoplanar® packaging technology provides reliable and HIGH voltage insulation with greater than 10mm creepage and clearance distance, and 0.5mm internal insulation distance while still offering a compact footprint
■ 2.5A OUTPUT current driving capability for medium power IGBT/MOSFET
   – Use of P-Channel MOSFETs at OUTPUT stage enables OUTPUT voltage swing close to the supply rail
■ 35kV/µs Minimum Common Mode Rejection
■ Wide Supply Voltage range from 15V to 30V
■ Fast Switching SPEED over full operating temperature range
   – 400ns max. propagation delay
   – 100ns max. pulse width distortion
■ UnderVoltage LockOut (UVLO) with hysteresis
■ Extended industrial temperate range, -40 to 100°C temperature range
■ Safety and regulatory approvals
   – UL1577, 5,000VRMS for 1 min.
   – DIN EN/IEC60747-5-5, 1,414V peak working insulation voltage
  
Applications
■ AC and brushless DC motor drives
■ Industrial inverter
■ Uninterruptible power supply
■ Induction heating
■ Isolated IGBT/Power MOSFET gate drive

 

Part Name(s) : PS9614 PS9614L NEC
NEC => Renesas Technology
Description : NEC's HIGH NOISE REDUCTION HIGH SPEED DIGITAL OUTPUT TYPE 8 PIN DIP OPTOCOUPLER View

DESCRIPTION
NECs PS9614 and PS9614L are optically coupled isolators containing a GaAIAs LED on the light emitting diode (input) side and a photodiode and a signal procesing circuit on the detector (OUTPUT) side on one chip. The PS9614 is in a plastic DIP (Dual In-line Package) and the PS9614L is a lead-bending type (Gull-wing) for surface mount.

FEATURES
HIGH COMMON MODE TRANSIENT IMMUNITY:
   CMR, CML: ± 20 kV/µs TYP
HIGH SPEED RESPONSE:
   10 Mbps
HIGH ISOLATION VOLTAGE:
   BV: 3750 Vr.m.s. MIN
• OPEN COLLECTOR OUTPUT TYPE
• TAPE AND REEL AVAILABLE:
   PS9614L-E3, E4: 1000 Pcs/Reel

APPLICATIONS
• MEASUREMENT EQUIPMENT
• PDP
• FACTORY AUTOMATION NETWORK

Part Name(s) : FOD8160 Fairchild
Fairchild Semiconductor
Description : HIGH NOISE Immunity, 3.3 V / 5 V, 10 Mbit/sec, Logic Gate OPTOCOUPLER in Wide-Body SOP 5-PIN View

Description
The FOD8160 is a 3.3 V / 5 V HIGH-SPEED logic gate OPTOCOUPLER with open collector OUTPUT, which supports isolated communications to allow digital signals to communicate between systems without conducting ground loops or hazardous voltages. It utilizes Fairchild’s prioprietary Optoplanar® coplanar packaging technology and optimized IC design to achieve HIGH NOISE immunity, characterized by HIGH common-mode rejection specifications.

Features
■ Optoplanar® packaging technology allows more than 10 mm creepage and clearance distance, and 0.5 mm insulation distance to achieve reliable and HIGH voltage insulation
HIGH NOISE immunity characterized by common-mode transient immunity (CMTI)
    – 20 kV/µs Minimum CMTI
■ Specifications guaranteed over 3 V to 5.5 V supply voltage and -40°C to 100°C extended industrial temperature range
HIGH SPEED, 10 Mbit/sec Data Rate (NRZ)
■ Safety and regulatory approvals
    – UL1577, 5,000 VACRMS for 1 minute
    – DIN-EN/IEC60747-5-5, 1,414 V peak working insulation voltage (pending approval)

Applications
■ Isolating intelligent power module
■ Isolating industrial communication interface

Part Name(s) : PS8602L-E3 PS8602L PS8602L1 PS8602L2 PS8602-V PS8602L-V PS8602L1-V PS8602L2-V NEC
NEC => Renesas Technology
Description : HIGH NOISE REDUCTION HIGH SPEED ANALOG OUTPUT TYPE 8 PIN PHOTOCOUPLER View

DESCRIPTION
PS8602 and PS8602L is a 8-PIN HIGH SPEED photocoupler containing a GaAIAs LED on input side and a P-N photodiode and a HIGH SPEED amplifier transistor on OUTPUT side on one chip. PS8602 is in a plastic DIP (Dual In-line Package). PS8602L is lead bending type (Gull wing) for surface mount.

FEATURES
HIGH common mode transient immunity
   (OMR, OML: ±2000 V/μs MIN.)
HIGH supply voltage (VCC = 35 V MAX.)
HIGH SPEED response (tPHL, tPLH: 0.8 μs MAX.)
HIGH isolation voltage (BV: 5 000 Vr.m.s. MIN.)
• TTL, CMOS compatible with a resistor
• TaPINg product number (PS8602L-E3)
• UL recognized [File No. E72422(s)]
• VDE0884 recognized: option

APPLICATIONS
• Interface circuit for various instrumentations, control equipments.
• Computer and peripheral manufactures.

1

2345678910 Next

All Rights Reserved © datasheetbank.com 2014 - 2020 [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]