datasheetbank_Logo     Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

P/N + Description + Content Search

Search Words :

Part Name(s) : LC66558B LC66556B LC66558B SANYO
SANYO -> Panasonic
Description : FOUR-BIT SINGLE-CHIP MICROCONTROLLERS WITH 6 k AND 8 k BYTES OF ON-CHIP ROM View

Overview
The LC66556B AND LC66558B are FOUR-BIT SINGLE-CHIP CMOS MICROCONTROLLERS that integrate on a single chip all the functions required in a microcontroller, including ROM, RAM, I/O ports, two serial interfaces, comparator inputs, three-value inputs, timers AND interrupts. These products are provided in a 64-pin package.
These products differ fROM the earlier LC66558A Series in the power supply voltage range AND certain other electrical characteristics.

Features AND Functions
ON-CHIP ROM AND RAM WITH 6 k (or 8 k) byte AND 512 × 4-bit capacities
• The same instruction set (WITH 127 instructions) as the LC66000 Series (except that the SB instruction is not supported)
• I/O ports: 54 pins
• 8-bit serial interface: two circuits (16-bit cascade connection supported)
• Instruction cycle: 0.92 to 10 µs (at 3 to 5.5 V)
• Powerful timers AND prescalers 12-bit timer: time-limit timer, event counter, pulse width measurement, square wave output 8-bit timer: time-limit timer, event counter, PWM output, square wave output 12-bit prescaler: time base functions
• Powerful 11-factor 8-vector interrupt system External interrupts: 6 factors/3 vectors Internal interrupts: 5 factors/5 vectors
• Flexible I/O functions Comparator inputs, three-value inputs, 20 mA drive outputs, 15 V breakdown voltage pins, pull-up/opendrain option switching possible
• Runaway detection function (watchdog timer) option
• 8-bit I/O function
• Power saving functions: halt AND hold modes Package: DIP64S, QFP64E
• Evaluation LSI: LC66599 (evaluation chip) + EVA850/800-TB665XX LC66E516 (ON-CHIP EPROM MICROCONTROLLERS) LC66P516 (ON-CHIP OTPROM MICROCONTROLLERS)

Part Name(s) : LC5872 LC5873 LC5874 LC5876 SANYO
SANYO -> Panasonic
Description : 4-bit SINGLE-CHIP MICROCONTROLLERS WITH LCD Driver, 12KB/8KB/6KB/4KB ROM, 1BK RAM On Chip View

4-bit SINGLE-CHIP MICROCONTROLLERS WITH LCD Driver, 12KB/8KB/6KB/4KB ROM, 1BK RAM On Chip

Part Name(s) : LC868016A LC868012A LC868008A SANYO
SANYO -> Panasonic
Description : 8-Bit Single Chip Microcontroller WITH 16/12/08K-Byte ROM AND 640-Byte RAM On Chip View

Overview
The LC868016A/12A/08A MICROCONTROLLERS are 8-bit single chip MICROCONTROLLERS WITH the following ON-CHIP functional blocks :
    - CPU : Operable at a minimum bus cycle time OF 0.5µs (microseconds)
    - ON-CHIP ROM maximum capacity : 16K BYTES
    - ON-CHIP RAM capacity : 640 BYTES
    - Dot-matrix liquid crystal display (LCD) automatic display controller / driver
    - External memory
    - 16-bit timer / counter (or two 8-bit timers)
    - 16-bit timer / PWM (or two 8-bit timers)
    - Two 8-bit synchronous serial-interface circuits
    - 13-source 9-vectored interrupt system
All OF the above functions are fabricated on a single chip.

Part Name(s) : LC868116A LC868112A LC868108A SANYO
SANYO -> Panasonic
Description : 8-Bit Single Chip Microcontroller WITH 16/12/08K-Byte ROM AND 640-Byte RAM On Chip View

Overview
The LC868116A/12A/08A MICROCONTROLLERS are 8-bit single chip MICROCONTROLLERS WITH the following ON-CHIP functional blocks :
    - CPU : Operable at a minimum bus cycle time OF 0.5µs (microseconds)
    - ON-CHIP ROM maximum capacity : 16K BYTES
    - ON-CHIP RAM capacity : 640 BYTES
    - Dot-matrix liquid crystal display (LCD) automatic display controller / driver
    - External memory
    - 16-bit timer / counter (or two 8-bit timers)
    - 16-bit timer / PWM (or two 8-bit timers)
    - Two 8-bit synchronous serial-interface circuits
    - 13-source 9-level vectored interrupt system
All OF the above functions are fabricated on a single chip


Part Name(s) : LC66566B LC66562B SANYO
SANYO -> Panasonic
Description : 12 AND 16-kbyte onn-chip ROM capacities CMOS 4-Bit aingle-chip MICROCONTROLLERS View

12 AND 16-kbyte onn-chip ROM capacities CMOS 4-Bit aingle-chip MICROCONTROLLERS

Part Name(s) : LC865520A LC865516A LC865512A LC865508A LC865504A SANYO
SANYO -> Panasonic
Description : 8-Bit Single Chip Microcontroller WITH ON-CHIP 20/16/12/08/04K-Byte ROM AND 512-Byte RAM View

Overview
The LC865520A/16A/12A/08A/04A MICROCONTROLLERS are 8-bit single chip MICROCONTROLLERS WITH the following one-chip functional blocks:
    - CPU : Operable at a minimum bus cycle time OF 0.5µs (microsecond)
    - ON-CHIP ROM Maximum Capacity : 20K BYTES
    - ON-CHIP RAM Capacity : 512 BYTES (LC865520A/16A/12A/08A/04A)
    - 16-bit timer /counter (or two 8-bit timers)
    - 16-bit timer /PWM (or two 8-bit timers)
    - 8-channel × 8-bit AD converter
    - Two 8-bit synchronous serial-interface circuits
    - 13-source 10-vectored interrupt system80
All OF the above functions are fabricated on a single chip.

Part Name(s) : LC876564 LC876564A LC876572 LC876572A SANYO
SANYO -> Panasonic
Description : 8-Bit Single Chip Microcontroller WITH 72/64 KB ROM AND 2048-Byte RAM On Chip View

Overview
The LC876572A AND LC876564A are 8 bit single chip MICROCONTROLLERS WITH the following ON-CHIP functional blocks :
- CPU: operable at a minimum bus cycle time OF 100 ns
- ON-CHIP ROM Maximum Capacity :  LC876572A  72K BYTES
LC876564A 64K BYTES
- ON-CHIP RAM: 2048 BYTES
- VFD automatic display controller / driver
- 16 bit timer / counter (can be divided into two 8 bit timers)
- 16 bit timer / PWM (can be divided into two 8 bit timers)
- timer for use as date / time clock
- synchronous serial I/O port (WITH automatic block transmit / receive function)
- asynchronous / synchronous serial I/O port
- 12-channel ×8-bit AD converter
- Weak signal detector
- 15-source 10-vectored interrupt system

All OF the above functions are fabricated on a single chip.

 

 

Part Name(s) : LC662104A LC662108A LC662106A SANYO
SANYO -> Panasonic
Description : FOUR-BIT SINGLE-CHIP MICROCONTROLLERS WITH 4, 6, AND 8 KB OF ON-CHIP ROM View

Overview
The LC662104A, LC662106A, AND LC662108A are 4-bit CMOS MICROCONTROLLERS that integrate on a single chip all the functions required in a special-purpose telephone controller, including ROM, RAM, I/O ports, a serial interface, a DTMF generator, timers, AND interrupt functions. These MICROCONTROLLERS are available in a 30-pin package.

Features AND Functions
ON-CHIP ROM capacities OF 4, 6, AND 8 kiloBYTES, AND an ON-CHIP RAM capacity OF 384 × 4 bits.
• Fully supports the LC66000 Series common instruction set (128 instructions). (The special-purpose instructions for TM1 AND SI/01 are disabled.)
• I/O ports: 24 pins
• DTMF generator This microcontroller incorporates a circuit that can generate two sine wave outputs, DTMF output.
• 8-bit serial interface: one circuit
• Instruction cycle time: 0.95 to 10 µs (at 3.0 to 5.5 V)
• Powerful timer functions AND prescalers
    — Time limit timer, event counter, pulse width measurement, AND square wave output using a 12-bit timer.
    — Time base function using a 12-bit prescaler.
• Powerful interrupt system WITH 6 interrupt factors AND 6 interrupt vector locations.
    — External interrupts: 3 factors/3 vector locations
    — Internal interrupts: 3 factors/3 vector locations
• Flexible I/O functions Selectable options include 20-mA drive outputs, pull-up AND open drain circuits.
• Optional runaway detection function (watchdog timer)
• 8-bit I/O functions
• Power saving functions using halt AND hold modes.
• Packages: DIP30SD, MFP30S
• Evaluation ICs: LC665099 (evaluation chip) + EVA86K
    - ECB662500 LC66E2108(ON-CHIP EPROM microcontroller)

Part Name(s) : LC66354C LC66356C LC66358C SANYO
SANYO -> Panasonic
Description : FOUR-BIT SINGLE-CHIP MICROCONTROLLERS WITH 4, 6, AND 8 KB OF ON-CHIP ROM View

Overview
The LC66354C, LC66356C, AND LC66358C are 4-bit CMOS MICROCONTROLLERS that integrate on a single chip all the functions required in a system controller, including ROM, RAM, I/O ports, a serial interface, comparator inputs, three-value inputs, timers, AND interrupt functions. These three MICROCONTROLLERS are available in a 42-pin package.

Features AND Functions
ON-CHIP ROM capacities OF 4, 6, AND 8 kiloBYTES, AND an ON-CHIP RAM capacity OF 512 × 4 bits.
• Fully supports the LC66000 Series common instruction set (128 instructions).
• I/O ports: 36 pins
• 8-bit serial interface: two circuits (can be connected in cascade to form a 16-bit interface)
• Instruction cycle time: 0.92 to 10 µs (at 2.5 to 5.5 V)
    — For the earlier LC66358A Series: 1.96 to 10 µs (at 3.0 to 5.5 V) AND 3.92 to 10 µs (at 2.2 to 5.5 V)
    — For the earlier LC66358B Series: 0.92 to 10 µs (at 3.0 to 5.5 V)
• Powerful timer functions AND prescalers
    — Time limit timer, event counter, pulse width measurement, AND square wave output using a 12-bit timer.
    — Time limit timer, event counter, PWM output, AND square wave output using an 8-bit timer.
    — Time base function using a 12-bit prescaler.
• Powerful interrupt system WITH 8 interrupt factors AND 8 interrupt vector locations.
    — External interrupts: 3 factors/3 vector locations
    — Internal interrupts: 5 factors/5 vector locations
• Flexible I/O functions Comparator inputs, three-value inputs, 20-mA drive outputs, 15-V high-voltage pins, AND pull-up/open-drain options.
• Optional runaway detection function (watchdog timer)
• 8-bit I/O functions
• Power saving functions using halt AND hold modes.
• Packages: DIP42S, QIP48E (QFP48E)
• Evaluation LSIs
    — LC66599 (evaluation chip) + EVA85/800-TB6630X
    — LC66E308 (ON-CHIP EPROM microcontroller) used together.

1

2345678910 Next

All Rights Reserved © datasheetbank.com 2014 - 2019 [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]