datasheetbank_Logo    Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site
Part Name  

P/N + Description + Content Search

Search Words :

Part Name(s) : TLE2074Y TI
Texas Instruments
Description : EXCALIBUR LOW-NOISE HIGH-SPEED JFET-INPUT OPERATIONAL AMPLIFIERS

description
The TLE207x series of JFET-INPUT OPERATIONAL AMPLIFIERS more than double the bandwidth and triple the slew rate of the TL07x and TL08x families of BiFET OPERATIONAL AMPLIFIERS. Texas Instruments EXCALIBUR process yields a typical noise floor of 11.6 nV/√Hz, 17-nV/√Hz ensured maximum, offering immediate improvement in noise-sensitive circuits designed using the TL07x. The TLE207x also has wider supply voltage rails, increasing the dynamic signal range for BiFET circuits to ±19 V. On-chip zener trimming of offset voltage yields precision grades for greater accuracy in dc-coupled applications. The TLE207x are pin-compatible with lower performance BiFET OPERATIONAL AMPLIFIERS for ease in improving performance in existing designs.

● Direct Upgrades to TL05x, TL07x, and TL08x BiFET OPERATIONAL AMPLIFIERS
● Greater Than 2× Bandwidth (10 MHz) and 3× Slew Rate (45 V/µs) Than TL07x
● Ensured Maximum Noise Floor 17 nV/√Hz
● On-Chip Offset Voltage Trimming for Improved DC Performance
● Wider Supply Rails Increase Dynamic Signal Range to ±19 V

View
Part Name(s) : 5962-9460201QHA 5962-9460203QDA TLE2071ACDRG4 TLE2071AIPE4 TLE2071IPE4 TLE2071MUB TLE2074MWB TI
Texas Instruments
Description : EXCALIBUR LOW-NOISE HIGH-SPEED JFET-INPUT OPERATIONAL AMPLIFIERS

description
The TLE207x series of JFET-INPUT OPERATIONAL AMPLIFIERS more than double the bandwidth and triple the slew rate of the TL07x and TL08x families of BiFET OPERATIONAL AMPLIFIERS. Texas Instruments EXCALIBUR process yields a typical noise floor of 11.6 nV/√Hz, 17-nV/√Hz ensured maximum, offering immediate improvement in noise-sensitive circuits designed using the TL07x. The TLE207x also has wider supply voltage rails, increasing the dynamic signal range for BiFET circuits to ±19 V. On-chip zener trimming of offset voltage yields precision grades for greater accuracy in dc-coupled applications. The TLE207x are pin-compatible with lower performance BiFET OPERATIONAL AMPLIFIERS for ease in improving performance in existing designs.
BiFET OPERATIONAL AMPLIFIERS offer the inherently higher input impedance of the JFET-INPUT transistors, without sacrificing the output drive associated with bipolar AMPLIFIERS. This makes them better suited for interfacing with high-impedance sensors or very low-level ac signals. They also feature inherently better ac response than bipolar or CMOS devices having comparable power consumption.
The TLE207x family of BiFET AMPLIFIERS are Texas Instruments highest performance BiFETs, with tighter input offset voltage and ensured maximum noise specifications. Designers requiring less stringent specifications but seeking the improved ac characteristics of the TLE207x should consider the TLE208x OPERATIONAL amplifier family.
Because BiFET OPERATIONAL AMPLIFIERS are designed for use with dual power supplies, care must be taken to observe common-mode input voltage limits and output swing when operating from a single supply. DC biasing of the input signal is required and loads should be terminated to a virtual ground node at mid-supply. Texas Instruments TLE2426 integrated virtual ground generator is useful when operating BiFET AMPLIFIERS from single supplies.
The TLE207x are fully specified at ±15 V and ±5 V. For operation in low-voltage and/or single-supply systems, Texas Instruments LinCMOS families of OPERATIONAL AMPLIFIERS (TLC- and TLV-prefix) are recommended. When moving from BiFET to CMOS AMPLIFIERS, particular attention should be paid to slew rate and bandwidth requirements and output loading.

● Direct Upgrades to TL05x, TL07x, and
   TL08x BiFET OPERATIONAL AMPLIFIERS
● Greater Than 2× Bandwidth (10 MHz) and
   3× Slew Rate (45 V/µs) Than TL07x
● Ensured Maximum Noise Floor
   17 nV/√Hz
● On-Chip Offset Voltage Trimming for
   Improved DC Performance
● Wider Supply Rails Increase Dynamic
   Signal Range to ±19 V

View
Part Name(s) : TL071AC TL071ACP TL071C TL071CD TL072AC TL072ACD TL072ACP TL072C TL072CD TL074AC TL074C TL074CN TL074ACN Motorola
Motorola => Freescale
Description : LOW NOISE, JFET INPUT OPERATIONAL AMPLIFIERS

Low Noise, JFET Input OPERATIONAL AMPLIFIERS

These low noise JFET input OPERATIONAL AMPLIFIERS combine two state–of–the–art analog technologies on a single monolithic integrated circuit. Each internally compensated OPERATIONAL amplifier has well matched high voltage JFET input device for low input offset voltage. The BIFET technology provides wide bandwidths and fast slew rates with low input bias currents, input offset currents, and supply currents. Moreover, the devices exhibit low noise and low harmonic distortion, making them ideal for use in high fidelity audio amplifier applications.
These devices are available in single, dual and quad OPERATIONAL AMPLIFIERS which are pin–compatible with the industry standard MC1741, MC1458, and the MC3403/LM324 bipolar products.

• Low Input Noise Voltage: 18 nV/√Hz Typ
• Low Harmonic Distortion: 0.01% Typ
• Low Input Bias and Offset Currents
• High Input Impedance: 10 12 Ω Typ
• High Slew Rate: 13 V/µs Typ
• Wide Gain Bandwidth: 4.0 MHz Typ
• Low Supply Current: 1.4 mA per Amp

View
Part Name(s) : TLE2142Y TLE2142MP TI
Texas Instruments
Description : EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION DUAL OPERATIONAL AMPLIFIERS

description
The TLE2142 and TLE2142A devices are high-performance internally-compensated OPERATIONAL AMPLIFIERS built using Texas Instruments complementary bipolar EXCALIBUR process. The TLE2142A is a tighter offset voltage grade of the TLE2142. Both are pin-compatible upgrades to standard industry products.

• Low Noise
   10 Hz . . . 15 nV/√Hz
   1 kHz . . . 10.5 nV/√Hz
• 10000-pF Load Capability
• 20-mA Min Short-Circuit Output Current
• 27-V/µs Min Slew Rate
• High Gain-Bandwidth Product . . . 5.9 MHz
• Low VIO . . . 750 µV Max at 25°C
• Single or Split Supply
• Fast Settling Time
   340 ns to 0.1%
   400 ns to 0.01%
• Saturation Recovery . . . 150 ns
• Large Output Swing
   VCC– +0.1 V to VCC+ – 1 V

View
Part Name(s) : TLE2141AMD TLE2141AMP TLE2141MJB TLE2141MP TI
Texas Instruments
Description : EXCALIBUR LOW NOISE HIGH SPEED PRECISION OPERATIONAL AMPLIFIERS

description
The TLE2141 and TLE2141A devices are high-performance, internally compensated OPERATIONAL AMPLIFIERS built using Texas Instruments complementary bipolar EXCALIBUR process. The TLE2141A is a tighter offset voltage grade of the TLE2141. Both are pin-compatible upgrades to standard industry products.

• Low Noise
   10 Hz . . . 15 nV/√Hz
   1 kHz . . . 10.5 nV/√Hz
• 10000-pF Load Capability
• 20-mA Min Short-Circuit Output Current
• 27-V/µs Min Slew Rate
• High Gain-Bandwidth Product . . . 5.9 MHz
• Low VIO . . . 500 µV Max at 25°C
• Single or Split Supply . . . 4 V to 44 V
• Fast Settling Time
   340 ns to 0.1%
   400 ns to 0.01%
• Saturation Recovery . . . 150 ns
• Large Output Swing VCC– +0.1 V to VCC+ – 1 V

 

View
Part Name(s) : TLE2061BCP TLE2061BIP TLE2061AMP TLE2061MP TLE2061AMDR TLE2061Y TLE2061CPSR TLE2061MDR TLE2061AIDR TI
Texas Instruments
Description : EXCALIBUR JFET-INPUT HIGH-OUTPUT-DRIVE µPOWER OPERATIONAL AMPLIFIERS

description
The TLE2061, TLE2061A, TLE2061B, and TLE2061Y are JFET-INPUT, low-power, precision OPERATIONAL AMPLIFIERS manufactured using Texas Instruments EXCALIBUR process. These devices combine outstanding output drive capability with low power consumption, excellent dc precision, and wide bandwidth.

● Excellent Output Drive Capability
    VO = ±2.5 V Min at RL = 100 Ω, VCC± = ±5 V
    VO = ±12.5 V Min at RL = 600 Ω, VCC = ±15 V
● Low Supply Current . . . 280 µA Typ
● High Unity-Gain Bandwidth 1.8 MHz Typ
● High Slew Rate . . . 3.4 V/µs Typ
● Macromodels Included
● Wide Operating Supply Voltage Range VCC± = ±3.5 V to ±19 V
● High Open-Loop Gain . . . 230 V/mV Typ
● Low Offset Voltage . . . 500 µV Max
● Low Offset Voltage Drift With Time 0.04 µV/mo Typ
● Low Input Bias Current . . . 4 pA Typ

View
Part Name(s) : ON2990 TL071AC TL071ACP TL071C TL071CD TL072AC TL072ACD TL072ACP TL072C TL072CD TL072CDR2 TL074AC TL074ACN TL074C TL074CN ON-Semiconductor
ON Semiconductor
Description : Low Noise, JFET Input OPERATIONAL AMPLIFIERS

These low noise JFET input OPERATIONAL AMPLIFIERS combine two state–of–the–art analog technologies on a single monolithic integrated circuit. Each internally compensated OPERATIONAL amplifier has well matched high voltage JFET input device for low input offset voltage. The BIFET technology provides wide bandwidths and fast slew rates with low input bias currents, input offset currents, and supply currents. Moreover, the devices exhibit low noise and low harmonic distortion, making them ideal for use in high fidelity audio amplifier applications.
These devices are available in single, dual and quad OPERATIONAL AMPLIFIERS which are pin–compatible with the industry standard MC1741, MC1458, and the MC3403/LM324 bipolar products.

• Low Input Noise Voltage: 18 nV/√Hz Typ
• Low Harmonic Distortion: 0.01% Typ
• Low Input Bias and Offset Currents
• High Input Impedance: 10 12 Ω Typ
• High Slew Rate: 13 V/µs Typ
• Wide Gain Bandwidth: 4.0 MHz Typ
• Low Supply Current: 1.4 mA per Amp

View
Part Name(s) : TLE2141AM TLE2141AMFK TLE2141AMJG TLE2141M TLE2141MFK TLE2141MJG TLE2141Y TI
Texas Instruments
Description : EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS

description
The TLE2141M and TLE2141AM are high-performance, internally compensated OPERATIONAL AMPLIFIERS built using Texas Instruments complementary bipolar EXCALIBUR process. The TLE2141AM is a tighter offset voltage grade of the TLE2141M. Both are pin-compatible upgrades to standard industry products.
The design incorporates a patent-pending input stage that simultaneously achieves low audio band noise of 10.5 nV/√Hz with a 10-Hz 1/f corner and symmetrical 40-V/µs slew rate typically with loads up to 800 pF. The resulting low distortion and high power bandwidth are important in high-fidelity audio applications. A fast settling time of 340 ns to 0.1% of a 10-V step with a 2-kΩ/100-pF load is useful in fast actuator/positioning drivers. Under similar test conditions, settling time to 0.01% is 400 ns.

available features
• Low Noise:
   10 Hz . . . 15 nV/√Hz
   1 kHz . . . 10.5 nV/√Hz
• 10000-pF Load Capability
• 20-mA Min Short-Circuit Output Current
• 30-V/µs Min Slew Rate
• High Gain-Bandwidth Product . . . 5.9 MHz
• Low VIO . . . 500 µV Max at 25°C
• Single or Split Supply . . . 4 V to 44 V
• Fast Settling Time
   340 ns to 0.1%
   400 ns to 0.01%
• Saturation Recovery . . . 150 ns
• Large Output Swing . . . VCC– +0.1 V to VCC+ – 1 V

 

View
Part Name(s) : TLE2141-Q1 TLE2141QDRQ1 Texas-Instruments
Texas Instruments
Description : EXCALIBURLOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS

DESCRIPTION
The TLE2141-Q1 device is a high-performance, internally compensated OPERATIONAL amplifier built using the Texas Instruments complementary bipolar EXCALIBUR™ process. It is a pin-compatible upgrade to standard industry products.
The design incorporates an input stage that simultaneously achieves low audio-band noise of 10.5 nV/√Hz with a 10-Hz 1/f corner and symmetrical 40-V/μs slew rate typically with loads up to 800 pF. The resulting low distortion and high power bandwidth are important in high-fidelity audio applications. A fast settling time of 340 ns to 0.1% of a 10-V step with a 2-kΩ/100-pF load is useful in fast actuator/positioning drivers. Under similar test conditions, settling time to 0.01% is 400 ns.

FEATURES
• Qualified for Automotive Applications
• Low Noise
   – 10 Hz … 15 nV/√Hz
   – 1 kHz … 10.5 nV/√Hz
• 10000-pF Load Capability
• 20-mA Min Short-Circuit Output Current
• 27-V/μs Slew Rate (Min)
• High Gain-Bandwidth Product … 5.9 MHz
• Low VIO … 500 μV (Max) at 25°C
• Single or Split Supply … 4 V to 44 V
• Fast Settling Time
   – 340 ns to 0.1%
   – 400 ns to 0.01%
• Saturation Recovery … 150 ns
• Large Output Swing … VCC– + 0.1 V to VCC+ – 1 V

 

View
Part Name(s) : TL072 TL072SG TL072SG-13 Diodes
Diodes Incorporated.
Description : LOW NOISE JFET INPUT OPERATIONAL AMPLIFIERS

General Description
The JFET-INPUT OPERATIONAL AMPLIFIERS in the TL072 are similar to the TL082, with low input bias and offset currents and fast slew rate. The low harmonic distortion and low noise make the TL072 ideally suited for high-fidelity and audio preamplifier applications. Each amplifier features JFET inputs (for high input impedance) coupled with bipolar output stages integrated on a single monolithic chip.

Features
• Low Power Consumption
• Wide Common-Mode and Differential Voltage Ranges
• Low Input Bias and Offset Currents
• Output Short-Circuit Protection
• Low Total Harmonic Distortion…0.003% Typ
• Low Noise Vn= 18nV/√ΗΖ Typ at f=1kHz
• High Input Impedance…JFET-INPUT Stage
• Internal Frequency Compensation
• Latch-Up-Free Operation
• High Slew Rate…13V/μs Typ
• Common-Mode Input Voltage Range Includes VCC+
• SOP-8L: Available in “Green” Molding Compound (No Br, Sb)
• Lead Free Finish/ RoHS Compliant (Note 1)

Applications
• Active filters
• Audio pre-amps

View

1

2345678910 Next

 

All Rights Reserved © datasheetbank.com 2014 - 2019 [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]