datasheetbank_Logo    Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site
Part Name  

P/N + Description + Content Search

Search Words :

Part Name(s) : TL054CNS TL054MN TL054Y TL05 TL054MD TL054MFK TL05XA TI
Texas Instruments
Description : ENHANCED-JFET LOW-OFFSET OPERATIONAL AMPLIFIERS

description
The TL05x series of JFET-input OPERATIONAL AMPLIFIERS offers improved dc and ac characteristics over the TL07x and TL08x families of BiFET OPERATIONAL AMPLIFIERS. On-chip zener trimming of offset voltage yields precision grades as low as 1.5 mV (TL051A) for greater accuracy in dc-coupled applications. Texas Instruments improved BiFET process and optimized designs also yield improved bandwidth and slew rate without increased power consumption. The TL05x devices are pin-compatible with the TL07x and TL08x and can be used to upgrade existing circuits or for optimal performance in new designs.

● Direct Upgrades to TL07x and TL08x BiFET OPERATIONAL AMPLIFIERS
● Faster Slew Rate (20 V/µs Typ) Without Increased Power Consumption
● On-Chip Offset Voltage Trimming for Improved DC Performance and Precision Grades Are Available (1.5 mV, TL051A)
● Available in TSSOP for Small Form-Factor Designs

View
Part Name(s) : TL052ACPS TL052AMD TL052AMFK TL052AMJG TL052AMP TL052MD TL052MFK TL052Y TL052MP TI
Texas Instruments
Description : ENHANCED-JFET LOW-OFFSET OPERATIONAL AMPLIFIERS

description
The TL05x series of JFET-input OPERATIONAL AMPLIFIERS offers improved dc and ac characteristics over the TL07x and TL08x families of BiFET OPERATIONAL AMPLIFIERS. On-chip zener trimming of offset voltage yields precision grades as low as 1.5 mV (TL051A) for greater accuracy in dc-coupled applications. Texas Instruments improved BiFET process and optimized designs also yield improved bandwidth and slew rate without increased power consumption. The TL05x devices are pin-compatible with the TL07x and TL08x and can be used to upgrade existing circuits or for optimal performance in new designs.

● Direct Upgrades to TL07x and TL08x BiFET OPERATIONAL AMPLIFIERS
● Faster Slew Rate (20 V/µs Typ) Without Increased Power Consumption
● On-Chip Offset Voltage Trimming for Improved DC Performance and Precision Grades Are Available (1.5 mV, TL051A)
● Available in TSSOP for Small Form-Factor Designs

View
Part Name(s) : LF411-N LF411ACN LF411ACN/NOPB LF411CN LF411CN/NOPB TI
Texas Instruments
Description : Low Offset, Low Drift JFET Input OPERATIONAL Amplifier

Description
These devices are low-cost, high-speed, JFET input OPERATIONAL AMPLIFIERS with very low input offset voltage and input offset voltage drift. They require low supply current yet maintain a large gain bandwidth product and fast slew rate. In addition, well matched high voltage JFET input devices provide very low input bias and offset currents. The LF411 is pin compatible with the standard LM741 allowing designers to immediately upgrade the overall performance of existing designs.

 

View
Part Name(s) : LF411ACH Texas-Instruments
Texas Instruments
Description : Low Offset, Low Drift JFET Input OPERATIONAL Amplifier

General Description
These devices are low cost, high speed, JFET input OPERATIONAL AMPLIFIERS with very low input offset voltage and guaranteed input offset voltage drift. They require low supply current yet maintain a large gain bandwidth product and fast slew rate. In addition, well matched high voltage JFET input devices provide very low input bias and offset currents. The LF411 is pin compatible with the standard LM741 allowing designers to immediately upgrade the overall performance of existing designs.
These AMPLIFIERS may be used in applications such as high speed integrators, fast D/A converters, sample and hold circuits and many other circuits requiring low input offset voltage and drift, low input bias current, high input impedance, high slew rate and wide bandwidth.

Features
■ Internally trimmed offset voltage: 0.5 mV(max)
■ Input offset voltage drift: 10 µV/˚C(max)
■ Low input bias current: 50 pA
■ Low input noise current: 0.01 pA/√Hz
■ Wide gain bandwidth: 3 MHz(min)
■ High slew rate: 10V/µs(min)
■ Low supply current: 1.8 mA
■ High input impedance: 1012Ω
■ Low total harmonic distortion: ≤0.02%
■ Low 1/f noise corner: 50 Hz
■ Fast settling time to 0.01%: 2 µs

View
Part Name(s) : TL061ACD/ACDT TL061AID/AIDT TL061AMD/AMDT TL061AMD/MDT TL061BCD/BCDT TL061BID/BIDT TL061BMD/BMDT TL061CD/CDT TL061ID/IDT TL061MD/MDT ST-Microelectronics
STMicroelectronics
Description : Low power JFET single OPERATIONAL AMPLIFIERS

Description
The TL061, TL061A and TL061B are high-speed JFET input single OPERATIONAL AMPLIFIERS. Each of these JFET input OPERATIONAL AMPLIFIERS incorporates well matched, high-voltage JFET and bipolar transistors in a monolithic integrated circuit.

Features
■ Very low power consumption: 200 µA
■ Wide common-mode (up to VCC+) and
   differential voltage ranges
■ Low input bias and offset currents
■ Output short-circuit protection
■ High input impedance JFET input stage
■ Internal frequency compensation
■ Latch-up free operation
■ High slew rate : 3.5V/µs

View
Part Name(s) : LF412-N-MIL LF412MH LF412MH/NOPB TI
Texas Instruments
Description : Low Offset, Low Drift Dual JFET Input OPERATIONAL Amplifier

Description
These devices are low cost, high speed, JFET input OPERATIONAL AMPLIFIERS with very low input offset voltage and input offset voltage drift. They require low supply current yet maintain a large gain bandwidth product and fast slew rate. In addition, well matched high voltage JFET input devices provide very low input bias and offset currents. The LF412-N-MIL dual is pin compatible with the LM1558, allowing designers to immediately upgrade the overall performance of existing designs.
These AMPLIFIERS may be used in applications such as high speed integrators, fast D/A converters, sample and hold circuits and many other circuits requiring low input offset voltage and drift, low input bias current, high input impedance, high slew rate and wide bandwidth.

Features
• Internally Trimmed Offset Voltage: 1 mV (Max)
• Input Offset Voltage Drift: 7 µV/°C (Typ)
• Low Input Bias Current: 50 pA
• Low Input Noise Current: 0.01 pA /√Hz
• Wide Gain Bandwidth: 3 MHz (Min)
• High Slew Rate: 10V/µs (Min)
• Low Supply Current: 1.8 mA/Amplifier
• High Input Impedance: 1012 Ω
• Low Total Harmonic Distortion: ≤ 0.02%
• Low 1/f Noise Corner: 50 Hz
• Fast Settling Time to 0.01%: 2 µs

Applications
• High Speed Integrators
• Fast D/A Converters
• Sample and Hold Circuits

View
Part Name(s) : TL071AC TL071ACP TL071C TL071CD TL072AC TL072ACD TL072ACP TL072C TL072CD TL074AC TL074C TL074CN TL074ACN Motorola
Motorola => Freescale
Description : LOW NOISE, JFET INPUT OPERATIONAL AMPLIFIERS

Low Noise, JFET Input OPERATIONAL AMPLIFIERS

These low noise JFET input OPERATIONAL AMPLIFIERS combine two state–of–the–art analog technologies on a single monolithic integrated circuit. Each internally compensated OPERATIONAL amplifier has well matched high voltage JFET input device for low input offset voltage. The BIFET technology provides wide bandwidths and fast slew rates with low input bias currents, input offset currents, and supply currents. Moreover, the devices exhibit low noise and low harmonic distortion, making them ideal for use in high fidelity audio amplifier applications.
These devices are available in single, dual and quad OPERATIONAL AMPLIFIERS which are pin–compatible with the industry standard MC1741, MC1458, and the MC3403/LM324 bipolar products.

• Low Input Noise Voltage: 18 nV/√Hz Typ
• Low Harmonic Distortion: 0.01% Typ
• Low Input Bias and Offset Currents
• High Input Impedance: 10 12 Ω Typ
• High Slew Rate: 13 V/µs Typ
• Wide Gain Bandwidth: 4.0 MHz Typ
• Low Supply Current: 1.4 mA per Amp

View
Part Name(s) : LF441C LF441CD LF441CDR2 LF441CN LF442C LF442CD LF442CDR2 LF442CN LF444C LF444CD LF444CDR2 LF444CN ONSEMI
ON Semiconductor
Description : LOW POWER JFET INPUT OPERATIONAL AMPLIFIERS

Low Power JFET Input OPERATIONAL AMPLIFIERS

These JFET input OPERATIONAL AMPLIFIERS are designed for low power applications. They feature high input impedance, low input bias current and low input offset current. Advanced design techniques allow for higher slew rates, gain bandwidth products and output swing. The LF441C device provides for the external null adjustment of input offset voltage.
These devices are specified over the commercial temperature range. All are available in plastic dual in–line and SOIC packages.

• Low Supply Current: 200 µA/Amplifier
• Low Input Bias Current: 5.0 pA
• High Gain Bandwidth: 2.0 MHz
• High Slew Rate: 6.0 V/µs
• High Input Impedance: 1012 Ω
• Large Output Voltage Swing: ±14 V
• Output Short Circuit Protection

 

View
Part Name(s) : LF441C LF441CD LF441CDR2 LF441CN LF442C LF442CD LF442CDR2 LF442CN LF444C LF444CD LF444CDR2 LF444CN ON-Semiconductor
ON Semiconductor
Description : LOW POWER JFET INPUT OPERATIONAL AMPLIFIERS

Low Power JFET Input OPERATIONAL AMPLIFIERS

These JFET input OPERATIONAL AMPLIFIERS are designed for low power applications. They feature high input impedance, low input bias current and low input offset current. Advanced design techniques allow for higher slew rates, gain bandwidth products and output swing. The LF441C device provides for the external null adjustment of input offset voltage.
These devices are specified over the commercial temperature range. All are available in plastic dual in–line and SOIC packages.

• Low Supply Current: 200 µA/Amplifier
• Low Input Bias Current: 5.0 pA
• High Gain Bandwidth: 2.0 MHz
• High Slew Rate: 6.0 V/µs
• High Input Impedance: 1012 Ω
• Large Output Voltage Swing: ±14 V
• Output Short Circuit Protection

 

View
Part Name(s) : LF412 LF412ACN LF412CH LF412CN LF412MDC LF412MH LF412MH/883 LF412MJ/883 LF412MW8 LF412MWC LF412XYZ National-Semiconductor
National ->Texas Instruments
Description : Low Offset, Low Drift Dual JFET Input OPERATIONAL Amplifier

General Description
These devices are low cost, high speed, JFET input OPERATIONAL AMPLIFIERS with very low input offset voltage and guaranteed input offset voltage drift. They require low supply current yet maintain a large gain bandwidth product and fast slew rate. In addition, well matched high voltage JFET input devices provide very low input bias and offset currents. The LF412 dual is pin compatible with the LM1558, allowing designers to immediately upgrade the overall performance of existing designs.
These AMPLIFIERS may be used in applications such as high speed integrators, fast D/A converters, sample and hold circuits and many other circuits requiring low input offset voltage and drift, low input bias current, high input impedance, high slew rate and wide bandwidth.

Features
■ Internally trimmed offset voltage: 1 mV (max)
■ Input offset voltage drift: 10 µV/˚C (max)
■ Low input bias current: 50 pA
■ Low input noise current: 0.01 pA/√Hz
■ Wide gain bandwidth: 3 MHz (min)
■ High slew rate: 10V/µs (min)
■ Low supply current: 1.8 mA/Amplifier
■ High input impedance: 1012Ω
■ Low total harmonic distortion ≤0.02%
■ Low 1/f noise corner: 50 Hz
■ Fast settling time to 0.01%: 2 µs

View

1

2345678910 Next

 

All Rights Reserved © datasheetbank.com 2014 - 2019 [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]