datasheetbank_Logo     Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

P/N + Description + Content Search

Search Words :

Part Name(s) : ML7000-01 ML7000-01MA ML7000-01MB ML7000-02 ML7000-02MA ML7000-02MB ML7000-03 ML7000-03MA ML7000-03MB ML7001-01 ML7001-01MA ML7001-01MB ML7001-02 ML7001-02MA ML7001-02MB ML7001-03 ML7001-03MA ML7001-03MB OKI
Oki Electric Industry
Description : Single Rail CODEC View

GENERAL DESCRIPTION
The ML7000/ML7001 are single-channel CMOS CODEC LSI devices for voice signals ranging from 300 to 3400 Hz with filters for A/D and D/A conversion. Designed especially for a single-power supply and LOW-power applications, the devices are optimized for ISDN terminals, digital wireless systems, and digital PBXs. The devices use the same transmission clocks as those used in the MSM7507. With the differential analog signal outputs which can drive 60 W load, the devices can directly drive a handset receiver.


FEATURES
• Single power supply: +5 V (ML7000-xx)
                              +3 V (ML7001-xx)
LOW power consumption
Operating mode: 25 mW Typ. VDD = 5.0 V (ML7000-xx)
                       20 mW Typ. VDD = 3.0 V (ML7001-xx)
Power-down mode: 0.05 mW Typ. VDD = 5.0 V (ML7000-xx)
                          0.03 mW Typ. VDD = 3.0 V (ML7001-xx)
• Conforms to ITU-T Companding law
      ML7000-01/ML7001-01: m/A-law pin selectable
      ML7000-02/ML7001-02: m-law
     ML7000-03/ML7001-03: A-law
• Transmission characteristics conform to ITU-T G.714
• Short frame sync timing operation
• Built-in PLL eliminates a master clock
• Serial data rate: 64/96/128/192/200/256/384/512/768/1024/1536/1544/2048 kHz
• Adjustable transmit gain
• Adjustable receive gain
• Built-in reference voltage supply
• Package options:
24-pin plastic SOP (SOP24-P-430-1.27-K) (Product name: ML7000-01MA/ML7001-01MA)
                                                   (Product name: ML7000-02MA/ML7001-02MA)
                                                (Product name: ML7000-03MA/ML7001-03MA)
20-pin plastic SSOP (SSOP20-P-250-0.95-K) (Product name: ML7000-01MB/ML7001-01MB)
                                                (Product name: ML7000-02MB/ML7001-02MB)
                                                  (Product name: ML7000-03MB/ML7001-03MB)

Part Name(s) : MXR7311GL ETC
Unspecified
Description : LOW COST, LOW Noise 2 g DUAL Axis Accelerometer with Ratiometric Analog Outputs View

[MEMSIC]

GENERAL DESCRIPTION
The MXR7311GL is a LOW COST, DUAL axis accelerometer fabricated on a standard, submicron CMOS process. It is a complete sensing system with on-chip mixed signal processing. The MXR7311GL measures acceleration with a full-scale range of ±2 g and a sensitivity of 167mV/g @3V.

FEATURES
    LOW COST
    Resolution better than 1 milli-g
    DUAL axis accelerometer fabricated on a monolithic
    CMOS IC
    On chip mixed signal processing
    No moving parts; >50,000 g shock survival rating
    5mm X 5mm X 2mm LCC package
    2.7V to 5.25V single supply continuous operation
    Compensated for Sensitivity over temperature
    Ultra LOW initial Zero-g Offset
    No adjustment needed outside

APPLICATIONS
    Tilt and motion sensing in COST-sensitive applications
    Smart handheld devices
    Computer security
    Input devices
    Pedometers and activity monitors
    Gaming controllers
    Toys and entertainment products

Part Name(s) : KM4211IC8 KM4211IC8TR3 KM4211IM8 KM4211 KM4211IM8TR3 Fairchild
Fairchild Semiconductor
Description : DUAL, 0.2mA, LOW COST, +2.7V & +5V, 35MHz Rail-to-Rail Amp View

General Description
The KM4211 is a DUAL ultra-LOW power, LOW COST, voltage feedback amplifier. The KM4211 uses only 208µA of supply current per amplifier and is designed to operate from 2.5V to 5.5V or ±1.25V to ±2.75V supplies. The input voltage range extends 300mV beLOW the negative rail and 1.2V beLOW the positive rail.

Features
■ 208µA supply current
■ 35MHz bandwidth
■ Fully specified at +2.7V and +5V supplies
■ Output voltage range: 0.08V to 4.88V; Vs = +5
■ Input voltage range: -0.3V to +3.8V; Vs = +5
27V/µs slew rate
■ ±8.5mA linear output current
■ ±13mA short circuit output current
■ 21nV/√Hz input voltage noise
■ Directly replaces OPA2350, MAX4132, MAX4281
■ Small package options (SOIC-8 and MSOP-8)

Applications
■ A/D buffer
■ Smart card readers
■ Active filters
■ Keyless entry
■ Signal conditioning
■ ASCI input devices
■ Portable test instruments
■ PCMUA cards
■ Portable communications
■ Bar-code readers
■ Portable/battery-powered applications

Part Name(s) : D100ED D101ED D102ED D103ED D104ED D111ED D112ED D113ED D114ED D121ED D122ED D123ED D124ED MPD
MicroPower Direct, LLC
Description : Very LOW COST, 1W SIP DUAL Isolated Output DC/DC Converters View

Very LOW COST, 1W SIP DUAL Isolated Output DC/DC Converters

Key Features:
•1W Output Power
•Miniature SIP Case
•UL Approved (File E245422)
DUAL Isolated Outputs
•1,000 VDC Isolation
•>3.5 MHour MTBF
•12 Standard Models
•Industry Standard Pin-Out
LOWEST COST!!


Part Name(s) : MP2363 MP2363DN MPS
Monolithic Power Systems
Description : 3A, 27V, 365KHz Step-Down Converter View

DESCRIPTION
The MP2363 is a non-synchronous step-down regulator with an integrated Power MOSFET. It achieves 3A continuous output current over a wide input supply range with excellent load and
line regulation.

FEATURES
• 3A Continuous Output Current, 4A Peak Output Current
•Programmable Soft-Start
•100mΩInternal Power MOSFET Switch
• Stable with LOW ESR Output Ceramic Capacitors
• Up to 95% Efficiency
• 20µA Shutdown Mode
• Fixed 365KHz frequency
•Thermal Shutdown
• Cycle-by-Cycle Over Current Protection
• Wide 4.75V to 27V Operating Input Range
• Output is Adjustable From 0.92V to 21V
• Under Voltage Lockout

APPLICATIONS
•Distributed Power Systems
•Battery Chargers
• Pre-Regulator for Linear Regulators

Part Name(s) : KM4111IT5 KM4111 KM4111IT5TR3 KM4121IT6 KM4121 KM4121IT6TR3 Fairchild
Fairchild Semiconductor
Description : 0.2mA, LOW COST, +2.7V & +5V, 35MHz Rail-to-Rail Amplifiers View

General Description
The KM4111 (single) and KM4121 (single with disable) are ultra-LOW power, LOW COST, voltage feedback amplifiers. These amplifiers use only 208µA of supply current and are designed to operate on +2.7V, +5V, or ±2.5V supplies. The input voltage range extends 300mV beLOW the negative rail and 1.2V beLOW the positive rail.
The KM4111 offers high bipolar performance at a LOW CMOS price. The KM4111 offers superior dynamic performance with a 35MHz small signal bandwidth and 27V/µs slew rate. The combination of LOWpower, high bandwidth, and rail-to-rail performance make the KM4111 well suited for battery-powered communication/computing systems.

Features
■ 208µA supply current
■ 35MHz bandwidth
■ Power down to Is = 35µA (KM4121)
■ Fully specified at +2.7V and +5V supplies
■ Output voltage range: 0.08V to 4.88V; Vs = +5
■ Input voltage range: -0.3V to +3.8V; Vs = +5
27V/µs slew rate
■ ±8.5mA linear output current
■ ±13mA short circuit output current
■ 21nV/√Hz input voltage noise
■ Directly replaces MAX4281
■ Small package options (SOT23-5 and SOT23-6)

Applications
■ Portable/battery-powered applications
■ A/D buffer
■ Active filters
■ Signal conditioning
■ Portable test instruments

Part Name(s) : MX210Q MX210QC MX210QL ETC1
Unspecified
Description : LOW COST, 10g, DUAL Axis Accelerometer with Analog Outputs View

General Description
The MX210Q is a very LOW COST DUAL-axis acceleration sensor on a monolithic IC. With no moving parts, the device is extremely reliable and is manufactured on a submicron CMOS process enabling small geometries and small die size, resulting in LOW overall COST and high functionality. The MX210Q is primarily designed for applications requiring high performance and where overall system COST is a driving factor in component selection. The MX210Q measures acceleration with a full-scale range of up to ±10g and produces an Analog signal output. The X,Y accelerometer outputs are scaled proportionately to the VDD, VDA supply voltage with the scale of 44%.Typical noise floor is 750 µg/√Hz rms, alLOWing signals beLOW 1 .0 milli-g to be resolved in 1 Hz bandwidth.
Frequency response extends to 40 Hz. The frequency response can be extended to 160 Hz with the implementation of a simple external circuit. See Application Note (AN-00MX-003).

Features
DUAL axis acceleration outputs
• Analog outputs, ratiometric
• 1.0 mg Resolution in 1Hz bandwidth
• 40 Hz Bandwidth expandable to 160 Hz See Application Note (AN-00MX-003)
• Quiescent Supply Voltage: 3.5 mA
• 0g output voltage 2.315V (with 5V supply)
• 50,000g shock survival
• 2.70V to 5.25V Single Supply
• On-chip mixed signal processing
• Continuous sensors self test
• Temperature sensor output (Tout) 5mV/°K
• Packaged in 8 pin LCC SMD or 10 pin TO-100 THRU-HOLE
• Hermetically sealed packaging
• Reference voltage (VREF) 2.50V

Applications
• Automotive - Vehicle Security/Active Suspension/ABS/HED Angle Control
• Security - Gas Line/Elevator/Fatigue Sensing
• Office Automation Equipment - Computer Peripherals/Disk Drives/PDA’s/Mouse Smart Pens/Cell Phones/Printer Head Acceleration Sensor
• Gaming - Joystick/RF Interface/Menu Selection
• White Goods - Spin Vibration Control

Part Name(s) : D100E D101E D102E D103E D104E D105E D106E D107E D108E D111E D112E D113E D114E D115E D116E D117E D118E D121E D122E D123E D124E D125E D126E D127E D128E MPD
MicroPower Direct, LLC
Description : LOW COST, 1W SIP Single & DUAL Output DC/DC Converters View

LOW COST, 1W SIP Single & DUAL Output DC/DC Converters

Key Features:
•1W Output Power
•Miniature SIP Case
•UL Approved (File E245422)
•Single & DUAL Outputs
•1,000 VDC Isolation
•>3.5 MHour MTBF
•24 Standard Models
LOWEST COST!!

Part Name(s) : HIP1013 HIP1013CB HIP1013CBZA HIP1013CBZA-T Renesas
Renesas Electronics
Description : LOW COST DUAL Power Distribution Controller View

The HIP1013 is a LOW COST HOT SWAP DUAL supply power distribution controller. Two external N-Channel MOSFETs are driven to distribute power while providing load fault isolation. At turn-on, the gate of each external N-Channel MOSFET is charged with a 10A current source. Capacitors on each gate (see the Typical Application Diagram), create a programmable ramp (soft turn-on) to control inrush currents. A built in charge pump supplies the gate drive for the 12V supply N-Channel MOSFET switch.

Features
• HOT SWAP DUAL Power Distribution Control for +5V and +12V or +5V and +3.3V
• Provides Fault Isolation
• Charge Pump AlLOWs the Use of N-Channel MOSFETs
• Redundant Power On Controls
• Power Good and Over Current Latch Indicators
• Adjustable Turn-On Ramp
• Protection During Turn-On
• Pb-free Available

Applications
• Power Distribution Control
• Hot Plug™ Components

1

2345678910 Next

All Rights Reserved © datasheetbank.com 2014 - 2020 [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]