datasheetbank_Logo    Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site
Part Name  

P/N + Description + Content Search

Search Words :

Part Name(s) : MC145406P MC145406DW MC145406SD MC145406 Motorola
Motorola => Freescale
Description : Driver/Receiver EIA 232-E AND CCITT V.28 (Formerly RS-232-D)

Driver/Receiver EIA 232-E AND CCITT V.28 (Formerly RS-232-D)

The MC145406 is a silicon–gate CMOS IC that combines three drivers AND three receivers to fulfill the electrical specifications of stANDards EIA 232–E AND CCITT V.28. The drivers feature true TTL input compatibility, slew–rate–limited output, 300–Ω power–off source impedance, AND output typically switching to within 25% of the supply rails. The receivers can hANDle up to ± 25 V while presenting 3 to 7 kΩ impedance. Hysteresis in the receivers aids reception of noisy signals. By combining both drivers AND receivers in a single CMOS chip, the MC145406 provides efficient, low–power solutions for EIA 232–E AND V.28 applications.

Drivers
• ± 5 V to ±12 V Supply Range
• 300–Ω Power–Off Source Impedance
• Output Current Limiting
• TTL Compatible
• Maximum Slew Rate = 30 V/µs

Receivers
• ± 25 V Input Voltage Range When VDD = 12 V, VSS = – 12 V
• 3 to 7 kΩ Input Impedance
• Hysteresis on Input Switchpoint

View
Part Name(s) : ML145403 ML145403-6P ML145403RP ML145404 ML145404-6P ML145404RP ML145405 ML145405-6P ML145405RP ML145408 ML145408LP ML145408-6P LANSDALE
LANSDALE Semiconductor Inc.
Description : DRIVERS/RECEIVERS RS 232/EIA–232–E AND CCITT V.28

These devices are silicon gate CMOS ICs that combine both the transmitter AND receiver to fulfill the electrical specifications of EIA StANDard 232–E AND CCITT V.28. The drivers feature true TTL input compatibility, slew rate limiting outputs, 300 Ω power–off source impedance, AND output typically switching to within 25% of the supply rails. The receivers can hANDle up to ± 25 V while presenting 3 to 7 kΩ impedance. Hysteresis in the receivers aid in the reception of noisy signals. By combining both drivers AND receivers in a single CMOS chip, these devices provide efficient, low–power solutions for both EIA–232–E AND V.28 applications.
These devices offer the following performance features:

• Operating Temperature Range TA = –40° to +85°C

Drivers
• ± 5 to ± 12 V Supply Range
• 300 Ω Power–Off Source Impedance
• Output Current Limiting
• TTL AND CMOS Compatible Inputs
• Driver Slew Rate Range Limited to 30 V/µs Maximum

Receivers
• ± 25 V Input Range
• 3 to 7 kΩ Input Impedance
• 0.8 V of Hysteresis for Enhanced Noise Immunity
• TTL AND CMOS Compatible Outputs

View
Part Name(s) : MC145403 MC145404 MC145405 MC145408 MC145403P MC145404P MC145405P MC145408P MC145403DW MC145404DW MC145405DW MC145408DW MC145405SD Motorola
Motorola => Freescale
Description : DRIVER / RECEIVERS EIA–232–E AND CCITT V.28

These devices are silicon gate CMOS ICs that combine both the transmitter AND receiver to fulfill the electrical specifications of EIA StANDard 232–E AND CCITT V.28. The drivers feature true TTL input compatibility, slew rate limiting outputs, 300 Ω power–off source impedance, AND output typically switching to within 25% of the supply rails. The receivers can hANDle up to ± 25 V while presenting 3 to 7 kΩ impedance. Hysteresis in the receivers aid in the reception of noisy signals. By combining both drivers AND receivers in a single CMOS chip, these devices provide efficient, low–power solutions for both EIA–232–E AND V.28 applications.
These devices offer the following performance features:

Drivers
• ± 5 to ± 12 V Supply Range
• 300 Ω Power–Off Source Impedance
• Output Current Limiting
• TTL AND CMOS Compatible Inputs
• Driver Slew Rate Range Limited to 30 V/µs Maximum

Receivers
• ± 25 V Input Range
• 3 to 7 kΩ Input Impedance
• 0.8 V of Hysteresis for Enhanced Noise Immunity
• TTL AND CMOS Compatible Outputs

View
Part Name(s) : MC145406P ML145406EP MC145406DW ML145406-6P LANSDALE
LANSDALE Semiconductor Inc.
Description : Driver/Receiver EIA 232–E AND CCITT V.28 (Formerly RS–232–D)

Legacy Device: Motorola MC145406

The ML145406 is a silicon–gate CMOS IC that combines three drivers AND three receivers to fulfill the electrical specifications of stANDards EIA 232–E AND CCITT V.28. The drivers feature true TTL input compatibility, slew–rate–limited output, 300–Ω power–off source impedance, AND output typically switching to within 25% of the supply rails. The receivers can hANDle up to ±25 V while presenting 3 to 7 kΩ impedance. Hysteresis in the receivers aids reception of noisy signals. By combining both drivers AND receivers in a single CMOS chip, the ML145406 provides efficient, low–power solutions for EIA 232–E AND V.28 applications.

This device offers the following performance features:
• Operating Temperature Range = TA –40° to +85°C

Drivers
• ± 5 V to ±12 V Supply Range
• 300–Ω Power–Off Source Impedance
• Output Current Limiting
• TTL Compatible
• Maximum Slew Rate = 30 V/µs

Receivers
• ± 25 V Input Voltage Range When VDD = 12 V, VSS = – 12 V
• 3 to 7 kΩ Input Impedance
• Hysteresis on Input Switchpoint

View
Part Name(s) : HT6571 Holtek
Holtek Semiconductor
Description : Multiple RS-232 Drivers AND Receivers

General Description
The HT6571 is a CMOS device containing three RS-232 line drivers, AND five RS-232 line receivers that are used to interface data terminal equipment (DTE) with data circuit-terminating equipment (DCE).

Features
• Single-chip with easy interface between UART AND serial port connector
• Three drivers AND five receivers meet or exceed the requirements of EIA/TIA-232-D
• Designed to support data rates up to 120 Kbit/s
• Driver current-limited output: 25mA typ.
• Flexible supply voltage range
• ESD protection exceeds 5kV
• 20-pin SOP package

 

View
Part Name(s) : ADM222AAN ADM222AARN ADM222AARW ADI
Analog Devices
Description : High-Speed, 5 V, 0.1 μF CMOS RS-232 DRIVERS/RECEIVERS

GENERAL DESCRIPTION
The ADM222, ADM232A, ADM242 are a family of high-speed RS-232 line DRIVERS/RECEIVERS offering transmission rates up to 200 kB/s. Operating from a single 5 V power supply, a highly efficient on-chip charge pump using small (0.1 µF) external capacitors allows RS-232 bipolar levels to be developed. Two RS-232 drivers AND two RS-232 receivers are provided on each device.
   
FEATURES
    200 kB/s Transmission Rate
    Small (0.1 μF) Charge Pump Capacitors
    Single 5 V Power Supply
    Meets All EIA-232-E AND V.28 Specifications
    Two Drivers AND Two Receivers
    On-Board DC-DC Converters
    ±9 V Output Swing with 5 V Supply
    ±30 V Receiver Input Levels
    Pin Compatible with MAX222/MAX232A/MAX242
   
APPLICATIONS
    Computers
    Peripherals
    Modems
    Printers
    Instruments
   

View
Part Name(s) : GS75232 GS75232S GS75232SS GS75232TS ETC
Unspecified
Description : Multiple RS-232 Drivers & Receivers

Product Description
The GS75232 are monolithic device containing 3 independent drives AND 5 receivers. These are designed to interface between date terminal equipment AND date communication equipment as designed by EIA-232-D.

Features
Meets stANDard EIA-232-D (Revision of RS-232-C)
Drivers
  - Current Limited Output : 10 mA Typical
  - Power-off Output Impedance : 300 W Min
  - Slew Rate Control by Load Capacitor
  - Flexible Supply Voltage Range
  - Input Compatible with Most TTL AND DTL Circuits
Receivers
  - Input Resistance : 3 kW to 7 kW
  - Input Signal Range : ± 30 V
  - Built-in Input Hysteresis (Double Threshold)

View
Part Name(s) : GD75323 GD75323DW GD75323DWR Texas-Instruments
Texas Instruments
Description : MULTIPLE RS-232 DRIVERS AND RECEIVERS

description
The GD75323 combines five drivers AND three receivers from the trade-stANDard SN75188 AND SN75189 bipolar quadruple drivers AND receivers, respectively. The flow-through design of the GD75323 decreases the part count, reduces the board space required, AND allows easy interconnection of the UART AND serial-port connector. The all-bipolar circuits AND processing of the GD75323 provide a rugged, low-cost solution for this function.

● Single Chip With Easy Interface Between UART AND Serial-Port Connector of an External Modem or Other Computer Peripheral
● Five Drivers AND Three Receivers Meet or Exceed the Requirements of ANSI StANDard TIA/EIA-232-F AND ITU Recommendation V.28 StANDards
● Supports Data Rates up to 120 kbit/s
● Complement to the GD75232
● Provides Pin-to-Pin Replacement for the Goldstar GD75323
● Pin-Out Compatible With SN75196
● Functional Replacement for the MC145405

View
Part Name(s) : GD75323 GD75323DW GD75323DWG4 GD75323DWR GD75323N TI
Texas Instruments
Description : MULTIPLE RS-232 DRIVERS AND RECEIVERS

description
The GD75323 combines five drivers AND three receivers from the trade-stANDard SN75188 AND SN75189 bipolar quadruple drivers AND receivers, respectively. The flow-through design of the GD75323 decreases the part count, reduces the board space required, AND allows easy interconnection of the UART AND serial-port connector. The all-bipolar circuits AND processing of the GD75323 provide a rugged, low-cost solution for this function.

● Single Chip With Easy Interface Between UART AND Serial-Port Connector of an External Modem or Other Computer Peripheral
● Five Drivers AND Three Receivers Meet or Exceed the Requirements of ANSI StANDard TIA/EIA-232-F AND ITU Recommendation V.28 StANDards
● Supports Data Rates up to 120 kbit/s
● Complement to the GD75232
● Provides Pin-to-Pin Replacement for the Goldstar GD75323
● Pin-Out Compatible With SN75196
● Functional Replacement for the MC145405

View
Part Name(s) : SP304 SP304CS SP304CT SP304ES SP304ET Sipex
Signal Processing Technologies
Description : RS-232/RS-422 Line DRIVERS/RECEIVERS

DESCRIPTION…
The SP304 is an enhanced-performance version of the Sipex SP302 RS-232 AND RS-422 protocol line drivers AND receivers. It is pin-for-pin compatible with the SP302, AND in any configuration, fully meets the requirements of the EIA RS-232D AND RS-422 data communication stANDards. A loopback test mode is provided.The SP304is available in 24-pin single width plastic DIP, AND 28-pin SOIC packages for commercial AND industrial temperature range operation.

■ RS-232 AND RS-422 on One Chip
■ Multiple Drivers AND Receivers
■ Software-selectable Modes
■ Loopback for Self-Testing
■ Short-circuit Protected
■ Single-width 24-pin DIP AND 28–pin SOIC Packages

View

1

2345678910 Next

 

All Rights Reserved © datasheetbank.com 2014 - 2019 [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]