datasheetbank_Logo     Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

P/N + Description + Content Search

Search Words :

Part Name(s) : NPH10S NPH10S2403EIC NPH10S2403IC NPH10S2405EIC NPH10S2405IC NPH10S2412EIC NPH10S2412IC NPH10S2415EIC NPH10S2415IC NPH10S4803EIC NPH10S4803IC NPH10S4805EIC NPH10S4805IC NPH10S4812EIC NPH10S4812IC NPH10S4815EIC NPH10S4815IC ETC
Unspecified
Description : DC-DC CONV, ISO POL, 1 O/P, 10W, 1.96A, 5.1V View

[Murata]

DESCRIPTION
The NPH10S series of DC-DC CONVerters combines ease of application with versatility. The pin pattern is based on the popular industry standard, but two additional pins may optionally be fitted to provide a variety of features not commonly found on units of this type. High efficiency enables full rating to be achieved in a small package without heat sinking. Thermally protected against sustained overload. The copper case achieves efficient heat transfer and screening. The product range has been recognised by Underwriters Laboratory (UL) to UL 1950 for operational insulation, file number E151252 applies.

FEATURES
■ RoHS compliant
■ High efficiency to 87%
■ Power density up to 1.5Wcm3
■ UL1950 recognized
■ Industry standard pinout
■ Surge rating to 12W
■ Non latching current limit
■ 1.5kV input to output ISOlation
■ Versatile control options
■ Continuous rating to 10W at 72ºC without heatsink
■ Operation to zero load
■ Protected against load faults
■ Internal over temperature protection
■ Uses no electrolytic capacitors
■ Fixed frequency
■ No external components required

Part Name(s) : NCX10S24033 NCX10S24033Y NCX10S24050 NCX10S24050Y NCX10S48033 NCX10S48033Y NCX10S48050 NCX10S48050Y CD-Technologies
C and D TECHNOLOGIES
Description : ISOlated 10W Single Output DC/DC CONVerters View

DESCRIPTION
The NCX10S series of DC/DC CONVerters combines ease of application with versatility and is available in two pin patterns based on popular industry standards. High efficiency enables full rating to be achieved in a small package without heatsinking, and a high surge capability will provide for start-up and transient loads, whilst being thermally protected against sustained overload.

FEATURES
■High Efficiency to 82%
■500V Input to Output ISOlation
■Industry Standard Pinout
■UL 60950 Recognition Pending
■Non Latching Current Limit
■Constant 400kHz Frequency
■Versatile Control Options
■Continuous Rating to 10W @85°C
■Operation to Zero Load
■Protected Against Load Faults
■Internal Over Temperature Protection
■Uses No Electrolytic Capacitors

Part Name(s) : DC-101 DC-101R DC-102R DC-108R DC-109R DC-110R DC-113R DC-202R DC-203R DC-204R DC-205R DC-206R DC-207R DC-208R DC-210R DC-211R DC-212R DC-213R DC-214R DC-215R DC-224R DC-216R DC-217R DC-218R DC-221R ETC
Unspecified
Description : 1.8watt 24pins DIP/DIL package View

[YCL]

Feature:
● Low Cost
● Miniature DIP/DIL Package
● 500Vdc Input/Output ISOlation
● Single and Dual Outputs
● No External Components required
● Low Profile and Compact Size

Part Name(s) : NPH10S NPH10S2403EIC NPH10S2403IC NPH10S2405EIC NPH10S2405IC NPH10S2412EIC NPH10S2412IC NPH10S2415EIC NPH10S2415IC NPH10S4803EIC NPH10S4803IC NPH10S4805EIC NPH10S4805IC NPH10S4812EIC NPH10S4812IC NPH10S4815EIC NPH10S4815IC Murata
Murata Manufacturing
Description : ISOlated 10W Single Output DC-DC CONVerters View

DESCRIPTION
The NPH10S series of DC-DC CONVerters combines ease of application with versatility. The pin pattern is based on the popular industry standard, but two additional pins may optionally be fitted to provide a variety of features not commonly found on units of this type. High efficiency enables full rating to be achieved in a small package without heat sinking. Thermally protected against sustained overload. The copper case achieves efficient heat transfer and screening. The product range has been recognised by Underwriters Laboratory (UL) to UL 1950 for operational insulation, file number E151252 applies.

FEATURES
■ RoHS compliant
■ High efficiency to 87%
■ Power density up to 1.5Wcm3
■ UL1950 recognized
■ Industry standard pinout
■ Surge rating to 12W
■ Non latching current limit
■ 1.5kV input to output ISOlation
■ Versatile control options
■ Continuous rating to 10W at 72ºC without heatsink
■ Operation to zero load
■ Protected against load faults
■ Internal over temperature protection
■ Uses no electrolytic capacitors
■ Fixed frequency
■ No external components required


Part Name(s) : TDA7494 ST-Microelectronics
STMicroelectronics
Description : 10W AMPLIFIER WITH DC VOLUME CONTROL View

DESCRIPTION
The TDA7494 10W is class AB power amplifier assembled in the @Multiwatt 15 package, specially designed for high quality sound, TV applications.
Features of the TDA7494 include volume control, 3 switchable inputs, Stand-by and mute functions.
   
10W OUTPUT POWER RL = 8Ω,
    @ THD = 10% VCC = 28V
■ ST-BY AND MUTE FUNCTIONS
■ LINEAR VOLUME CONTROL DC COUPLED
    WITH POWER OP AMPLIFIER
■ NO BOUCHEROT CELL
■ NO ST-BY RC INPUT NETWORK
■ SIGNAL LINE OUTPUT BEFORE VOLUME
    CONTROLLING AND MUTING
■ 3 SWITCHABLE VOLTAGE CONTROLLED
    INPUT PINS
■ SINGLE SUPPLY RANGING UP TO 35V
■ SHORT CIRCUIT PROTECTION
■ THERMAL OVERLOAD PROTECTION
■ INTERNALLY FIXED GAIN
■ SOFT CLIPPING
■ LOW TURN-ON TURN-OFF POP NOISE
■ MULTIWATT 15 PACKAGE
   

Part Name(s) : NPH10S NPH10S2403 NPH10S2403EI NPH10S2403I NPH10S2405 NPH10S2405EI NPH10S2405I NPH10S2412 NPH10S2412EI NPH10S2412I NPH10S2415 NPH10S2415EI NPH10S2415I NPH10S4803 NPH10S4803EI NPH10S4803I NPH10S4805 NPH10S4805EI NPH10S4805I NPH10S4812 NPH10S4812EI NPH10S4812I NPH10S4815 NPH10S4815EI NPH10S4815I CANDD
C AND D TECHNOLOGIES
Description : ISOlated 10W Single Output DC-DC CONVerters View

DESCRIPTION
The NPH10S series of DC-DC CONVerters combines ease of application with versatility. The pin pattern is based on the popular industry standard, but two additional pins may optionally be fitted to provide a variety of features not commonly found on units of this type. High efficiency enables full rating to be achieved in a small package without heatsinking. Thermally protected against sustained overload. The copper case achieves efficient heat transfer and screening. The product range has been recognised by Underwriters Laboratory (UL) to UL 1950 for operational insulation, file number E179522 applies.

FEATURES
■ High Efficiency to 86%
■ Power Density up to 1.5kW/L (24W/in3)
■ 1.5kV Input to Output ISOlation
■ Industry Standard Pinout
■ Surge Rating to 12W
■ Non Latching Current Limit
■ Fixed Frequency
■ Versatile Control Options
■ Continuous Rating to 10W at 72°C Without Heatsink
■ Operation to Zero Load
■ Protected Against Load Faults
■ Internal Over Temperature Protection
■ Uses No Electrolytic Capacitors
■ UL 94V-0 Package Materials

Part Name(s) : NPH10S NPH10S2403 NPH10S2403I NPH10S2403EI NPH10S2405 NPH10S2405I NPH10S2405EI NPH10S2412 NPH10S2412I NPH10S2412EI NPH10S2415 NPH10S2415I NPH10S2415EI NPH10S4803 NPH10S4803I NPH10S4803EI NPH10S4805 NPH10S4805I NPH10S4805EI NPH10S4812 NPH10S4812I NPH10S4812EI NPH10S4815 NPH10S4815I NPH10S4815EI CD-Technologies
C and D TECHNOLOGIES
Description : ISOlated 10W Single Output DC-DC CONVerters View

DESCRIPTION
The NPH10S series of DC-DC CONVerters combines ease of application with versatility. The pin pattern is based on the popular industry standard, but two additional pins may optionally be fitted to provide a variety of features not commonly found on units of this type. High efficiency enables full rating to be achieved in a small package without heatsinking. Thermally protected against sustained overload. The copper case achieves efficient heat transfer and screening. The product range has been recognised by Underwriters Laboratory (UL) to UL 1950 for operational insulation, file number E179522 applies.

FEATURES
■ High Efficiency to 86%
■ Power Density up to 1.5kW/L (24W/in3)
■ 1.5kV Input to Output ISOlation
■ Industry Standard Pinout
■ Surge Rating to 12W
■ Non Latching Current Limit
■ Fixed Frequency
■ Versatile Control Options
■ Continuous Rating to 10W at 72°C Without Heatsink
■ Operation to Zero Load
■ Protected Against Load Faults
■ Internal Over Temperature Protection
■ Uses No Electrolytic Capacitors
■ UL 94V-0 Package Materials

Part Name(s) : IDS100 IDS122 IDS121 IDS112 IDS101 MINMAX
Minmax Technology Co., Ltd.
Description : 10W, Step-Down, Single Output DC/DC CONVerters View

High efficiency, wide input voltage range and low output noise define IDS Series of non-ISOlated, step-down, switching DC/DC CONVerters.
   
Key Features
• Efficiency up To 93%
• Output Current up to 2A
• MTBF > 1,500,000 Hours
• Low Cost
• Remote On/Off Control
• Low Output Noise
• Temperature Performance -25°C to +70°C
• Step-down Switching Regulator
• Overload Protection
• Standby Current 100uA only
   

Part Name(s) : IDS100 IDS122 IDS121 IDS112 IDS101 TOTAL-POWER
Total Power International
Description : 10W, Step-Down, Single Output DC/DC CONVerters View

High efficiency, wide input voltage range and low output noise define IDS Series of non-ISOlated, step-down, switching DC/DC CONVerters.
   
Key Features
• Efficiency up To 93%
• Output Current up to 2A
• MTBF > 1,500,000 Hours
• Low Cost
• Remote On/Off Control
• Low Output Noise
• Temperature Performance -25°C to +70°C
• Step-down Switching Regulator
• Overload Protection
• Standby Current 100uA only
   

1

2345678910 Next

All Rights Reserved © datasheetbank.com 2014 - 2020 [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]