datasheetbank_Logo    Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site
Part Name  

P/N + Description + Content Search

Search Words :

Part Name(s) : LC876564 LC876564A LC876572 LC876572A SANYO
SANYO -> Panasonic
Description : 8-Bit Single CHIP Microcontroller with 72/64 KB ROM and 2048-Byte RAM On CHIP

Overview
The LC876572A and LC876564A are 8 bit single CHIP microcontrollers with the following on-CHIP functional blocks :
- CPU: operable at a minimum bus cycle time of 100 ns
- On-CHIP ROM Maximum Capacity :  LC876572A  72K bytes
LC876564A 64K bytes
- On-CHIP RAM: 2048 bytes
- VFD automatic display controller / driver
- 16 bit timer / counter (can be divided into two 8 bit timers)
- 16 bit timer / PWM (can be divided into two 8 bit timers)
- timer for use as date / time clock
- synchronous serial I/O port (with automatic block transmit / receive function)
- asynchronous / synchronous serial I/O port
- 12-channel ×8-bit AD converter
- Weak signal detector
- 15-source 10-vectored interrupt system

All of the above functions are fabricated on a single CHIP.

 

 

View
Part Name(s) : LC868016A LC868012A LC868008A SANYO
SANYO -> Panasonic
Description : 8-Bit Single CHIP Microcontroller with 16/12/08K-Byte ROM and 640-Byte RAM On CHIP

Overview
The LC868016A/12A/08A microcontrollers are 8-bit single CHIP microcontrollers with the following on-CHIP functional blocks :
    - CPU : Operable at a minimum bus cycle time of 0.5µs (microseconds)
    - On-CHIP ROM maximum capacity : 16K bytes
    - On-CHIP RAM capacity : 640 bytes
    - Dot-matrix liquid crystal display (LCD) automatic display controller / driver
    - External memory
    - 16-bit timer / counter (or two 8-bit timers)
    - 16-bit timer / PWM (or two 8-bit timers)
    - Two 8-bit synchronous serial-interface circuits
    - 13-source 9-vectored interrupt system
All of the above functions are fabricated on a single CHIP.

View
Part Name(s) : LC868116A LC868112A LC868108A SANYO
SANYO -> Panasonic
Description : 8-Bit Single CHIP Microcontroller with 16/12/08K-Byte ROM and 640-Byte RAM On CHIP

Overview
The LC868116A/12A/08A microcontrollers are 8-bit single CHIP microcontrollers with the following on-CHIP functional blocks :
    - CPU : Operable at a minimum bus cycle time of 0.5µs (microseconds)
    - On-CHIP ROM maximum capacity : 16K bytes
    - On-CHIP RAM capacity : 640 bytes
    - Dot-matrix liquid crystal display (LCD) automatic display controller / driver
    - External memory
    - 16-bit timer / counter (or two 8-bit timers)
    - 16-bit timer / PWM (or two 8-bit timers)
    - Two 8-bit synchronous serial-interface circuits
    - 13-source 9-level vectored interrupt system
All of the above functions are fabricated on a single CHIP

View
Part Name(s) : LQH32DN1R0M53L LQH32DN2R2M53L LQH32DN3R3M53L LQH32DN4R7M53L LQH32DN6R8M53L LQH32DN100K53L LQH32DN150K53L LQH32DN220K53L LQH32DN330K53L LQH32DN470K53L LQH32DN680K53L LQH32DN101K53L ETC
Unspecified
Description : CHIP COIL (CHIP INDUCTORS)

[MURATA MFG.CO., LTD]

Scope
This reference specification applies to LQH32DN_53 Series, CHIP coil (CHIP Inductors).

Rating
    • Operating Temperature Range. -40 to +105°C
    • Storage Temperature Range. -40 to +105°C

View
Part Name(s) : LC662104A LC662108A LC662106A SANYO
SANYO -> Panasonic
Description : Four-Bit Single-CHIP Microcontrollers with 4, 6, and 8 KB of On-CHIP ROM

Overview
The LC662104A, LC662106A, and LC662108A are 4-bit CMOS microcontrollers that integrate on a single CHIP all the functions required in a special-purpose telephone controller, including ROM, RAM, I/O ports, a serial interface, a DTMF generator, timers, and interrupt functions. These microcontrollers are available in a 30-pin package.

Features and Functions
• On-CHIP ROM capacities of 4, 6, and 8 kilobytes, and an on-CHIP RAM capacity of 384 × 4 bits.
• Fully supports the LC66000 Series common instruction set (128 instructions). (The special-purpose instructions for TM1 and SI/01 are disabled.)
• I/O ports: 24 pins
• DTMF generator This microcontroller incorporates a circuit that can generate two sine wave outputs, DTMF output.
• 8-bit serial interface: one circuit
• Instruction cycle time: 0.95 to 10 µs (at 3.0 to 5.5 V)
• Powerful timer functions and prescalers
    — Time limit timer, event counter, pulse width measurement, and square wave output using a 12-bit timer.
    — Time base function using a 12-bit prescaler.
• Powerful interrupt system with 6 interrupt factors and 6 interrupt vector locations.
    — External interrupts: 3 factors/3 vector locations
    — Internal interrupts: 3 factors/3 vector locations
• Flexible I/O functions Selectable options include 20-mA drive outputs, pull-up and open drain circuits.
• Optional runaway detection function (watchdog timer)
• 8-bit I/O functions
• Power saving functions using halt and hold modes.
• Packages: DIP30SD, MFP30S
• Evaluation ICs: LC665099 (evaluation CHIP) + EVA86K
    - ECB662500 LC66E2108(on-CHIP EPROM microcontroller)

View
Part Name(s) : GMS81604 GMS81604K GMS81604PL GMS81608 GMS81608K GMS81608PL GMS81608T GMS81608TK GMS81608TPL Hyundai
Hyundai Micro Electronics
Description : LG Semicon. CMOS single-CHIP 8-bit microcontroller. ROM size 8K bytes. 256 bytes of on-CHIP data RAM

Description
The GMS81604/08 is a high-performance CMOS 8-bit microcontroller with 4K or 8K bytes of ROM. The device is one of GMS800 family. The LG Semicon GMS81604/08 is a powerful microcontroller which provides a highly flexible and cost effective solution to many embedded control applications. The GMS81604/08 provides the following standard features: 8K bytes of ROM, 256 bytes of RAM, 35 I/O lines(33 lines for 40PDIP), 16-bit or 8-bit timer/counter, a precision analog to digital converter, on-CHIP oscillator and clock circuitry. In addition, the GMS81604/08 supports power saving modes to reduce power consumption. The Stop Mode saves the RAM contents but freezes the oscillator disabling all other CHIP functions until the next hardware reset or external interrupt.

Features
■ 4K/ 8K On-CHIP Program Memory
■ 256 Bytes of On-CHIP Data RAM
■ Instruction execution time: 0.5us at 8MHz
■ 2.4V to 5.5V Operating Range
■ 1~8 MHz Operating frequency
■ Basic Interval Timer
■ Four 8-Bit Timer/ Counters (can be used as two 16-bit)
■ Four external interrupt ports
■ Two Programmable Clock Out
■ One Buzzer Driving port
■ 31 Programmable I/O, 4 Input pins,
■ Twelve Interrupt Sources
■ All LED Direct Drive Output Ports
■ 8-Channel 8-Bit On-CHIP Analog to Digital Converter
■ Power Fail Processor (Noise immunity circuit)
■ Power Down Mode (Stop Mode)

View
Part Name(s) : BCM6348 Broadcom
Broadcom Corporation
Description : BCM6348 SINGLE-CHIP ADSL2+ CPE CHIP

FEATURES
• Single-CHIP ADSL2+ CPE device with integrated CPU, transceiver and AFE
• Standards compliant for worldwide G.992.1/G.992.2/G.992.3/G.992.5/T1.413 (Issue II) deployments supporting Annex A, B, C, J, I, L, and M
• High-performance MIPS32™ CPU with MMU and TLB support
• Hardware ATM SAR for enhanced ATM VC management, traffic shaping, and QoS
• Two 10/100-Mbps IEEE 802.3u Ethernet MACs and one PHY with auto-MDIX
• Configurable USB host and device interface with integrated transceiver
• Multi-format peripheral expansion bus with PCI, mini-PCI, CardBus, and PCMCIA support
• Serial and parallel FLASH support and high-speed SDRAM interface
• Extensive on-board CHIP power management, EJTAG, GPIO, and UART
• 1.2-mm package ball pitch for reduced PCB design complexity
• Complete protocol and application software support package
 

 

View
Part Name(s) : AMIS-720639 ETC
Unspecified
Description : 600dpi CIS Sensor CHIP

AMI Semiconductors AMIS-20639 PI3039 contact image Sensor (CIS) Sensor CHIP is a linear array image Sensor CHIP with a 600 elements per inch resolution. The Sensor CHIP is fabricated with AMI Semiconductorsproprietary CMOS image sensing technology. Since this image Sensor CHIP is intended for CIS module applications, multiple numbers of these Sensors will be serially cascaded to form a linear scanning image array of arbitrary length. These Sensors are butted end-to-end on a printed circuit board (PCB). The Sensors are mounted using the CHIP-on-board technology to form scanning arrays with various lengths

View
Part Name(s) : AMIS-720639 AMI
AMI Semiconductor
Description : 600dpi CIS Sensor CHIP

Description
AMI Semiconductors AMIS-20639 PI3039 contact image Sensor (CIS) Sensor CHIP is a linear array image Sensor CHIP with a 600 elements per inch resolution. The Sensor CHIP is fabricated with AMI Semiconductorsproprietary CMOS image sensing technology. Since this image Sensor CHIP is intended for CIS module applications, multiple numbers of these Sensors will be serially cascaded to form a linear scanning image array of arbitrary length. These Sensors are butted end-to-end on a printed circuit board (PCB). The Sensors are mounted using the CHIP-on-board technology to form scanning arrays with various lengths

View
Part Name(s) : BCM6348 BCM6348_04 ETC
Unspecified
Description : BCM6348 SINGLE-CHIP ADSL2+ CPE CHIP

[BROADCOM]

The BCM6348 combines a G.992.1/G.992.2/G.992.3/G.992.5/ T1.413 ADSL transceiver and AFE with a high-performance MIPS32 CPU, two 10/100-Mbps Ethernet interfaces, USB (host/device) transceiver, expansion bus interface supporting PCI, mini-PCI, CardBus, and PCMCIA into a single, high-performance CHIP.
The embedded ADSL transceiver and AFE implement G992.5 (ADSL2+), G.dmt, T1.413, and G.Lite ADSL, along with G.997.1, G.994.1, I.432 TC layer, dual-latency framing, NTR, and embedded operations channels for remote management of the CPE.
The embedded MIPS32 CPU, with Broadcom-supplied software, controls the ADSL modem, performs high-performance bridging and routing between the ADSL WAN interface and various LAN interfaces, and allows for custom application development with industry-standard EJTAG/Ethernet tool chains and development environments.
A full-featured ATM SAR supports complete traffic shaping, management, and QoS for multiple VCs. The embedded USB (host/device) transceiver, two 10/100-Mbps Ethernet MACs, and one PHY (with auto-MDIX) provide connectivity to PC hosts as well as optional 10/100/1000-Mbps Ethernet switches.

FEATURES
• Single-CHIP ADSL2+ CPE device with integrated CPU, transceiver and AFE
• Standards compliant for worldwide G.992.1/G.992.2/G.992.3/G.992.5/T1.413 (Issue II) deployments supporting Annex A, B, C, J, I, L, and M
• High-performance MIPS32™ CPU with MMU and TLB support
• Hardware ATM SAR for enhanced ATM VC management, traffic shaping, and QoS
• Two 10/100-Mbps IEEE 802.3u Ethernet MACs and one PHY with auto-MDIX
• Configurable USB host and device interface with integrated transceiver
• Multi-format peripheral expansion bus with PCI, mini-PCI, CardBus, and PCMCIA support
• Serial and parallel FLASH support and high-speed SDRAM interface
• Extensive on-board CHIP power management, EJTAG, GPIO, and UART
• 1.2-mm package ball pitch for reduced PCB design complexity
• Complete protocol and application software support package

 

View

1

2345678910 Next

 

All Rights Reserved © datasheetbank.com 2014 - 2019 [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]