datasheetbank_Logo    Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site
Part Name  

P/N + Description + Content Search

Search Words :

Part Name(s) : LC5872 LC5873 LC5874 LC5876 SANYO
SANYO -> Panasonic
Description : 4-Bit SINGLE-CHIP MICROCONTROLLERS with LCD Driver, 12KB/8KB/6KB/4KB ROM, 1KB RAM on chip

4-Bit SINGLE-CHIP MICROCONTROLLERS with LCD Driver, 12KB/8KB/6KB/4KB ROM, 1KB RAM on chip

View
Part Name(s) : LC66558B LC66556B LC66558B SANYO
SANYO -> Panasonic
Description : Four-Bit SINGLE-CHIP MICROCONTROLLERS with 6 k and 8 k Bytes of On-Chip ROM

Overview
The LC66556B and LC66558B are four-bit SINGLE-CHIP CMOS MICROCONTROLLERS that integrate on a single chip all the functions required in a microcontroller, including ROM, RAM, I/O ports, two serial interfaces, comparator inputs, three-value inputs, timers and interrupts. These products are provided in a 64-pin package.
These products differ from the earlier LC66558A Series in the power supply voltage range and certain other electrical characteristics.

Features and Functions
• On-chip ROM and RAM with 6 k (or 8 k) byte and 512 × 4-bit capacities
• The same instruction set (with 127 instructions) as the LC66000 Series (except that the SB instruction is not supported)
• I/O ports: 54 pins
8-BIT serial interface: two circuits (16-bit cascade connection supported)
• Instruction cycle: 0.92 to 10 µs (at 3 to 5.5 V)
• Powerful timers and prescalers 12-bit timer: time-limit timer, event counter, pulse width measurement, square wave output 8-BIT timer: time-limit timer, event counter, PWM output, square wave output 12-bit prescaler: time base functions
• Powerful 11-factor 8-vector interrupt system External interrupts: 6 factors/3 vectors Internal interrupts: 5 factors/5 vectors
• Flexible I/O functions Comparator inputs, three-value inputs, 20 mA drive outputs, 15 V breakdown voltage pins, pull-up/opendrain option switching possible
• Runaway detection function (watchdog timer) option
8-BIT I/O function
• Power saving functions: halt and hold modes Package: DIP64S, QFP64E
• Evaluation LSI: LC66599 (evaluation chip) + EVA850/800-TB665XX LC66E516 (On-chip EPROM MICROCONTROLLERS) LC66P516 (On-chip OTPROM MICROCONTROLLERS)

View
Part Name(s) : 87C51FA 87C51FB Philips
Philips Electronics
Description : CMOS SINGLE-CHIP 8-BIT MICROCONTROLLERS

DESCRIPTION
The 87C51FA and 87C51FB SINGLE-CHIP 8-BIT MICROCONTROLLERS are manufactured in an advanced CMOS process and are derivatives of the 80C51 microcontroller family. The 87C51FA/FB has the same instruction set as the 80C51.

FEATURES
• 80C51 central processing unit
• 87C51FA: 8k × 8 EPROM
  87C51FB: 16k × 8 EPROM
   – expandable externally to 64k bytes
   – Quick Pulse programming algorithm
   – Two level program security system
• 256 × 8 RAM, expandable externally to 64k bytes
• Three 16-bit timer/counters
   – T2 is an up/down counter
• Programmable Counter Array (PCA)
   – High speed output
   – Capture/compare
   – Pulse Width Modulator
   – Watchdog Timer
• Four 8-BIT I/O ports
• Full-duplex enhanced UART
   – Framing error detection
   – Automatic address recognition
• Power control modes
   – Idle mode
   – Power-down mode
• Once (On Circuit Emulation) Mode
• Five package styles
• OTP package available

 

View
Part Name(s) : SAK-XC2765X-104F80LAA SAK-XC2765X-104FXXL SAK-XC2765X-72FXXL XC2765X Infineon
Infineon Technologies
Description : 16-Bit CMOS SINGLE-CHIP MICROCONTROLLERS

The XC2765X series (16/32-Bit SINGLE-CHIP Microcontroller with 32-Bit Performance) is a part of the Infineon XC2000 Family of full-feature SINGLE-CHIP CMOS MICROCONTROLLERS. These devices extend the functionality and performance of the C166 Family in terms of instructions (MAC unit), peripherals, and speed. They combine high CPU performance (up to 80 million instructions per second) with extended peripheral functionality and enhanced IO capabilities. Optimized peripherals can be adapted flexibly to meet the application requirements. These derivatives utilize clock generation via PLL and internal or external clock sources. On-chip memory modules include program Flash, program RAM, and data RAM.

 

View
Part Name(s) : LC662104A LC662108A LC662106A SANYO
SANYO -> Panasonic
Description : Four-Bit SINGLE-CHIP MICROCONTROLLERS with 4, 6, and 8 KB of On-Chip ROM

Overview
The LC662104A, LC662106A, and LC662108A are 4-bit CMOS MICROCONTROLLERS that integrate on a single chip all the functions required in a special-purpose telephone controller, including ROM, RAM, I/O ports, a serial interface, a DTMF generator, timers, and interrupt functions. These MICROCONTROLLERS are available in a 30-pin package.

Features and Functions
• On-chip ROM capacities of 4, 6, and 8 kilobytes, and an on-chip RAM capacity of 384 × 4 bits.
• Fully supports the LC66000 Series common instruction set (128 instructions). (The special-purpose instructions for TM1 and SI/01 are disabled.)
• I/O ports: 24 pins
• DTMF generator This microcontroller incorporates a circuit that can generate two sine wave outputs, DTMF output.
8-BIT serial interface: one circuit
• Instruction cycle time: 0.95 to 10 µs (at 3.0 to 5.5 V)
• Powerful timer functions and prescalers
    — Time limit timer, event counter, pulse width measurement, and square wave output using a 12-bit timer.
    — Time base function using a 12-bit prescaler.
• Powerful interrupt system with 6 interrupt factors and 6 interrupt vector locations.
    — External interrupts: 3 factors/3 vector locations
    — Internal interrupts: 3 factors/3 vector locations
• Flexible I/O functions Selectable options include 20-mA drive outputs, pull-up and open drain circuits.
• Optional runaway detection function (watchdog timer)
8-BIT I/O functions
• Power saving functions using halt and hold modes.
• Packages: DIP30SD, MFP30S
• Evaluation ICs: LC665099 (evaluation chip) + EVA86K
    - ECB662500 LC66E2108(on-chip EPROM microcontroller)

View
Part Name(s) : LC66354C LC66356C LC66358C SANYO
SANYO -> Panasonic
Description : Four-Bit SINGLE-CHIP MICROCONTROLLERS with 4, 6, and 8 KB of On-Chip ROM

Overview
The LC66354C, LC66356C, and LC66358C are 4-bit CMOS MICROCONTROLLERS that integrate on a single chip all the functions required in a system controller, including ROM, RAM, I/O ports, a serial interface, comparator inputs, three-value inputs, timers, and interrupt functions. These three MICROCONTROLLERS are available in a 42-pin package.

Features and Functions
• On-chip ROM capacities of 4, 6, and 8 kilobytes, and an on-chip RAM capacity of 512 × 4 bits.
• Fully supports the LC66000 Series common instruction set (128 instructions).
• I/O ports: 36 pins
8-BIT serial interface: two circuits (can be connected in cascade to form a 16-bit interface)
• Instruction cycle time: 0.92 to 10 µs (at 2.5 to 5.5 V)
    — For the earlier LC66358A Series: 1.96 to 10 µs (at 3.0 to 5.5 V) and 3.92 to 10 µs (at 2.2 to 5.5 V)
    — For the earlier LC66358B Series: 0.92 to 10 µs (at 3.0 to 5.5 V)
• Powerful timer functions and prescalers
    — Time limit timer, event counter, pulse width measurement, and square wave output using a 12-bit timer.
    — Time limit timer, event counter, PWM output, and square wave output using an 8-BIT timer.
    — Time base function using a 12-bit prescaler.
• Powerful interrupt system with 8 interrupt factors and 8 interrupt vector locations.
    — External interrupts: 3 factors/3 vector locations
    — Internal interrupts: 5 factors/5 vector locations
• Flexible I/O functions Comparator inputs, three-value inputs, 20-mA drive outputs, 15-V high-voltage pins, and pull-up/open-drain options.
• Optional runaway detection function (watchdog timer)
8-BIT I/O functions
• Power saving functions using halt and hold modes.
• Packages: DIP42S, QIP48E (QFP48E)
• Evaluation LSIs
    — LC66599 (evaluation chip) + EVA85/800-TB6630X
    — LC66E308 (on-chip EPROM microcontroller) used together.

View
Part Name(s) : LC665304A LC665306A LC665308A LC665312A LC665316A SANYO
SANYO -> Panasonic
Description : Four-Bit SINGLE-CHIP MICROCONTROLLERS with 4, 6, 8, 12, and 16 KB of On-Chip ROM

Overview
The LC665304A, LC665306A, LC665308A, LC665312A, and LC665316A are 4-bit CMOS MICROCONTROLLERS that integrate on a single chip all the functions required in a system controller, including ROM, RAM, I/O ports, a serial interface, 16-value comparator inputs, timers, interrupt functions, and an optional sub-oscillator circuit. These MICROCONTROLLERS are available in a 48-pin package.

Features and Functions
• On-chip ROM capacitiy of 4, 6, 8, 12, and 16 kilobytes, and an on-chip RAM capacity of 512 × 4 bits.
• Fully supports the LC66000 Series common instruction set (128 instructions).
• I/O ports: 42 pins
• A sub-oscillator circuit can be used (option) This circuit allows power dissipation to be reduced by operating at lower speeds.
8-BIT serial interface: two circuits (can be connected in cascade to form a 16-bit interface)
• Instruction cycle time: 0.95 to 10 µs (at 3 to 5.5 V)
• Powerful timer functions and prescalers
    — Time limit timer, event counter, pulse width measurement, and square wave output using a 12-bit timer.
    — Time limit timer, event counter, PWM output, and square wave output using an 8-BIT timer.
    — Time base function using a 12-bit prescaler.
• Powerful interrupt system with 8 interrupt factors and 8 interrupt vector locations.
    — External interrupts: 3 factors/3 vector locations
    — Internal interrupts: 5 factors/5 vector locations
• Flexible I/O functions 16-value comparator inputs, 20-mA drive outputs, inverter circuits, pull-up and open-drain circuits selectable as options.
• Optional runaway detection function (watchdog timer)
8-BIT I/O functions
• Power saving functions using halt and hold modes.
• Packages: DIP48S, QIP48E (QFP48E)
• Evaluation LSIs: LC66599 (evaluation chip) + EVA800/850-TB662YXX2 LC66E5316(on-chip EPROM microcontroller)

View
Part Name(s) : LC662304A LC662306A LC662308A LC662312A LC662316A SANYO
SANYO -> Panasonic
Description : Four-Bit SINGLE-CHIP MICROCONTROLLERS with 4, 6, 8, 12, and 16 KB of On-Chip ROM

Overview
The LC662304A, LC662306A, LC662308A, LC662312A, and LC662316A are 4-bit CMOS MICROCONTROLLERS that integrate on a single chip all the functions required in a special-purpose telephone controller, including ROM, RAM, I/O ports, a serial interface, a DTMF generator, timers, and interrupt functions. These MICROCONTROLLERS are available in a 42-pin package.

Features and Functions
• On-chip ROM capacities of 4, 6, 8, 12, and 16 kilobytes, and an on-chip RAM capacity of 512 × 4 bits.
• Fully supports the LC66000 Series common instruction set (128 instructions).
• I/O ports: 36 pins
• DTMF generator
    This microcontroller incorporates a circuit that can generate two sine wave outputs, DTMF output, or a melody output for software applications.
8-BIT serial interface: one circuit
• Instruction cycle time: 0.95 to 10 µs (at 3.0 to 5.5 V)
• Powerful timer functions and prescalers
    — Time limit timer, event counter, pulse width measurement, and square wave output using a 12-bit timer.
    — Time limit timer, event counter, PWM output, and square wave output using an 8-BIT timer.
    — Time base function using a 12-bit prescaler.
• Powerful interrupt system with 10 interrupt factors and 7 interrupt vector locations.
    — External interrupts: 3 factors/3 vector locations
    — Internal interrupts: 4 factors/4 vector locations (Waveform output internal interrupts: 3 factors and 1 vector; shared with external expansion interrupts)
• Flexible I/O functions
    Selectable options include 20-mA drive outputs, inverter circuits, pull-up and open drain circuits.
• Optional runaway detection function (watchdog timer)
8-BIT I/O functions
• Power saving functions using halt and hold modes.
• Packages: DIP42S, QIP48E (QFP48E)
• Evaluation LSIs: LC66599 (evaluation chip) + EVA800/850-TB662YXX2 LC66E2316(on-chip EPROM microcontroller)

View
Part Name(s) : LC66354B LC66356B LC66358B SANYO
SANYO -> Panasonic
Description : Four-bit SINGLE-CHIP MICROCONTROLLERS On-Chip 4 K/6 K/8 K-byte ROM

Overview
The LC66354B, LC66356B and LC66358B are 42-pin package four-bit CMOS MICROCONTROLLERS that integrate on a single chip all functions required in a control microcontroller, including ROM, RAM, I/O ports, serial interfaces, comparator inputs, three-value inputs, timers and an interrupt system. These products differ from the earlier LC66358A series in their power supply voltage range and operating speed specifications.

Features and Functions
• ROM (with 4 K-, 6 K- and 8 K-byte capacities) and RAM (512 4-bit digits) on chip
• LC66000 series compatible instruction set (128 instructions)
• A total of 36 I/O port pins
• Two eight-bit serial interfaces that can be connected in cascade to form a 16-bit interface
• Instruction cycle time: 0.92 to 10 µs (3 to 5.5 V)
    The earlier LC66358A series had instruction cycle times of from 1.96 to 10 µs (at 3 to 5.5 V) and from 3.92 to 10 µs (at 2.2 to 5.5 V).
• Powerful timer and prescaler functions
    Time limit timer, event counter, pulse width measurement and square wave output using a 12-bit timer.
    Time limit timer, event counter, PWM output and square wave output using an 8-BIT timer.
    Time base function using a 12-bit prescaler.
• Powerful interrupt system with eight interrupts and eight vector locations
    External interrupts: three interrupts and three vector locations
    Internal interrupts: five interrupts and five vector locations
• Flexible I/O functions
    Comparator inputs, three-value inputs, 20 mA drive outputs, 15 V withstand voltage, pull-up or open-drain option switching
• Runaway detection function (watchdog timer) option
• Eight-bit I/O function
• Power reduction functions using halt and hold modes
• Packages: DIP42S, QIP48E (QFP48E)
• Evaluation LSI: used together
    — LC66599 (evaluation chip) + EVA850/800-TB6630X
    — LC66E308 (on-chip EPROM microcontroller)

View
Part Name(s) : 89C535 89C536 89C538 P89C535 P89C535NBA P89C535NBAA P89C536 P89C536NBA P89C536NBAA P89C536NBB P89C536NBBB P89C538 P89C538NBA P89C538NBAA P89C538NBB P89C538NBBB Philips
Philips Electronics
Description : CMOS SINGLE-CHIP 8-BIT MICROCONTROLLERS with FLASH program memory

DESCRIPTION
The 89C535/89C536/89C538 are SINGLE-CHIP 8-BIT MICROCONTROLLERS manufactured in advanced CMOS process and are derivatives of the 80C51 microcontroller family. All the devices have the same instruction set as the 80C51.
The devices also have four 8-BIT I/O ports, three 16-bit timer/event counters, a multi-source, two-priority-level, nested interrupt structure, UART and on-chip oscillator and timing circuits. For systems that require extra data memory capability up to 64k bytes, each can be expanded using standard TTL-compatible memories and logic.

FEATURES
• 80C51 Central Processing Unit
• 8k x 8 (89C535) 16k × 8 (89C536) or 64k × 8 (89C538), FLASH EPROM Program Memory
• 512 × 8 RAM, externally expandable to 64k × 8 Data Memory
• Three 16-bit counter/timers
• Up to 3 external interrupt request inputs
• 6 interrupt sources with 2 priority levels
• Four 8-BIT I/O ports
• Full-duplex UART
• Power control modes
   – Idle mode
   – Power down mode, with wakeup from power down using external interrupt
• 44-pin PLCC and QFP packages

 

View

1

2345678910 Next

 

All Rights Reserved © datasheetbank.com 2014 - 2019 [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]