DUAL BRIDGE DRIVER
The TA8400PP is Dual Bridge Driver designed especially for VCR cassette and tape loading motor drives
The LA6560 is a 5-channel driver (BTL : 4-channel, H bridge : 1-channel) for CD players.
•Power amplifier 5-channel built-in. (Bridge-connection (BTL) : 4-channel, H bridge : 1-channel)
•Level shift circuit built-in (except H bridge).
•Mute circuit (output ON/OFF) built-in.
(Operable with BTL AMP and not operable for the H bridge of 5VREG)
•5V regulator built-in (external PNP transistor).
•With VREF changeover function (H : external, L : internal (2.5V) selected)
•Overheat protection circuit (thermal shutdown) built-in.
The LA6570 is a 5CH driver (BTL : 4CH, H-bridge : 1CH) for CD players.
• Built-in POWER AMP 5CH (bridge connection (BTL) : 4CH, H-bridge : 1CH)
• IO max 1A
• Built-in level shift circuit (Except H-bridge.)
• Built-in MUTE circuit (output ON/OFF).
(Operates only for CH1 to CH4 BTL AMP. No operation for H-bridge and 5VREG.)
• Built-in 5V regulator (with external PNP transistor)
• Implements VREF switching function (Select H for external, or L for internal (2.5 V))
• Built-in overheat protection circuit (Thermal shutdown)
The TDA8933B is a high-efficiency class D amplifier with low power dissipation.
The device has two full differential inputs driving two independent outputs. It can be used in a mono full-bridge configuration (Bridge-Tied Load (BTL)) or as stereo half-bridge configuration (Single-Ended (SE)).
SINGLE PHASE PLASTIC BRIDGE RECTIFIERS (INCLUDING GLASS PASSIVATED)
A 1.2 A diode bridge rectifier assembly designed for new circuits and for replacement service. For printed circuit board applications.
The KBPC series of single phase rectifier bridge consists of four silicon junctions connected as a full bridge. These devices are intended for general use in industrial and consumer equipment.
• Suitable for printed circuit board or chassis mounting
• Compact construction
• High surge current capability
• Compliant to RoHS directive 2002/95/EC
STA506A is a monolithic quad half bridge stage in Multipower BCD Technology. The device can be used as dual bridge or reconfigured, by connecting CONFIG pin to Vdd pin, as single bridge with double current capability, and as half bridge (Binary mode) with half current capability.
■ MULTIPOWER BCD TECHNOLOGY
■ MINIMUM INPUT OUTPUT PULSE WIDTH DISTORTION
■ 200mΩ RdsON COMPLEMENTARY DMOS OUTPUT STAGE
■ CMOS COMPATIBLE LOGIC INPUTS
■ THERMAL PROTECTION
■ THERMAL WARNING OUTPUT
■ UNDER VOLTAGE PROTECTION
■ SHORT CIRCUIT PROTECTION
Single In-line Package
• SBD Bridge
• Low VF