datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

P/N + Description + Content Search

Search Word's :
Description : IDC SOCKET (DUAL BEAM)

IDC SOCKET (DUAL BEAM)

Description : SMD Quartz Crystal

4 Pad Version · 12.9 x 4.73 mm

■ reflow soldering temperature: 260 °C max.
■ package height 5.0 mm

 

Description : 1.25mm Pitch Super Low profile CrimPing Connector

Features
1. Super Low Profile
   This is a connector special for right angle which has pursued a low profile on the board.
   Board mounting height: 2.5mm
   A signal can be fetched from the area where there is no board to board space. (Refer to fig.1)
   Offset type is available.
   Board mounting height: 1.6mm (Refer to fig.2)
2. Correspond to Automatic Mounting
   The header has the vacuum mount face which enables the vacuum absorption and the automatic mounting by the embossed tape packaging.In addition, the tube packaging can be selected.
3. Four Wall Type Without Friction to Board by Socket
   The header has the box structure to prevent from being twisted and has the perfect mis-insertion prevention method. Moreover the header has the wall on the board side and doesnt have any trouble resulted from the friction to board by socket.
   In addition, the metal fitting is attached to prevent the solder peel.

Applications
   LCD, Note PC, Mobile Terminal Small business equipment, Video camera

Description : PSM Step-up DC/DC Converter

General Description
The G5130/G5131 boost converter is designed for use of main Power source on portable equipments.
It consist of an oscillator, PSM control logic circuit, an embedded Power MOS (LX switch), accurate voltage reference, error amplifier, feedback resistors, and LX protection circuit.
Only 3 external components (includes 1 inductor, 1 diode and 1 capacitor) are needed to construct the Power application.
For larger output Power application, G5131 can be used to drive an external NPN device for more input current.

Features
■ 1~4 Cell Alkaline Battery Operating Range
■ Output Voltage Range: 2.5V~5.0V in 0.1V In crements
■ Minimum External Component (L, D, C)
■ 100KHz Max. Oscillation Frequency
■ 75% Duty Ratio
■ Up to 80% Efficiency
■ ±2% High Output Voltage Accuracy
■ < 100ppm/°C Temperature Coefficient
■ SOT-89 and SOT-23-5 Small Packages

Applications
Power Source for Portable Equipments
■ Handheld Computers, Palmtops
■ Digital Still Cameras, Camcorders
■ Cellular Phones, Pagers
■ Portable Multimedia Players

 

Description : SMD Fuse, 3.2 x 1.6 mm, Slow-Blow, 32 VAC, 63 VDC

UL 248-14 · 32VAC · 63VDC · Time-Lag T

Description
- UL characteristic
- High melting I²t-values
- High current ratings up to 25 A
- Impermeable to potting compound

Applications
- Secondary Protection DC and AC
- Circuits with inrush
- LCD Backlight DC-AC Inverter

Description : FUSES/Non resettable fuses

Additional technical data

Ambient temperature max. Ta                         –55 °C to +90 °C
Recommended continuous operatingcurrent at    23°C      0,7 . In
Climatic category                                          55/090/21 according to IEC 60068-1
Solderability (Reflow- soldering)                       235 °C, 2 sec. (215 °C, 3 sec.) according to IEC 60068-2-58
Soldering heat resistance                                260 °C, 10 sec.,
Fuse-link temperature rise ≤ 75 K (UL/CSA) trackwidth: 5 mm
                                            according to IEC 60068-2-58
mperaturerhöhungen am Si-Einsatz                  ≤ 75 K (UL/CSA) according to IEC 60127-4
Storage temperature max.                              40 °C at 70% r. H. / r. F.
Materials Housing                                        Glass epoxy, flammability class UL94V-0 inals / Cu / Sn
Net weight pieces %                                     0,12 g

 

Description : PSM Step-up DC/DC Converter

General Description
The G5130/G5131 boost converter is designed for use of main Power source on portable equipments. It consist of an oscillator, PSM control logic circuit, an embedded Power MOS (LX switch), accurate voltage reference, error amplifier, feedback resistors, and LX protection circuit.
Only 3 external components (includes 1 inductor, 1 diode and 1 capacitor) are needed to construct the Power application.
For larger output Power application, G5131 can be used to drive an external NPN device for more input current.

Features
■ 1~4 Cell Alkaline Battery Operating Range
■ Output Voltage Range: 2.5V~5.0V in 0.1V In crements
■ Minimum External Component (L, D, C)
■ 100kHz Max. Oscillation Frequency
■ 75% Duty Ratio
■ Up to 80% Efficiency
■ ±2% High Output Voltage Accuracy
■ < 100ppm/°C Temperature Coefficient
■ SOT-89 and SOT-23-5 Small Packages

Applications
Power Source for Portable Equipments
■ Handheld Computers, Palmtops
■ Digital Still Cameras, Camcorders
■ Cellular Phones, Pagers
■ Portable Multimedia Players

 

Description : 150-mA Low Noise, Low Dropout Regulator

DESCRIPTION
The SiP21106 BiCMOS 150 mA low noise LDO voltage regulators are the perfect choice for low battery operated low Powered applications. An Ultra low ground current and low dropout voltage of 135 mV at 150 mA load helps to extend battery life for portable electronics. Systems requiring a quiet voltage source, such as RF applications, will benefit from the SiP21106 low output noise.

FEATURES
• TSC75-6L Package (1.6 x 1.6 x 0.6 mm), and TSOT23-5L Package Options
• 1.0 % Output Voltage Accuracy at 25 °C
• Low Dropout Voltage: 135 mV at 150 mA
• SiP21106 Low Noise: 60 µV(rms) (10 Hz to 100 kHz Bandwidth) With 10 nF Over Full Load Range
• 35 µA (typical) Ground Current at 1 mA Load
• 1 µA Maximum Shutdown Current at 85 °C
• Output Auto Discharge at Shutdown Mode
• Built-in Short Circuit (330 mA typical) and Thermal Protection (160 °C typical)
• SiP21108 Adjustable Output Voltage
• SiP21107 POK Error Flag
• - 40 °C to + 125 °C Junction Temperature Range for Operation
• Uses Low ESR Ceramic Capacitors
• Fixed Voltage Output 1.3 V to 5 V in 50 mV Steps

APPLICATIONS
• Cellular Phones, Wireless Handsets
• PDAs
• MP3 Players
• Digital Cameras
• Pagers
• Wireless Modem
• Noise-Sensitive Electronic Systems

Description : Watch Crysatals

2x6 Cylindrical Watch Crystal

Features
► Low cost
► Range of tolerances
► Excellent ageing characteristics
► Miniature size for high density applications
► Large stocks of popular specifications

Description : C-Band DWDM DFB Laser Component

C-Band DWDM DFB Laser Component

The 1754C laser component is a Dense Wavelength Division Multiplexing (DWDM) laser for analog CATV applications. It features a distributed-feedback (DFB) device that has been designed specifically for radio frequency (RF) and CATV applications. The 1754C laser component has a wide temperature range for reliable performance in harsh node environments and narrow transmitter designs. It also features low adiabatic chirp to maximize signal quality in short and long lengths of fiber. The laser’s excellent inherent linearity minimizes degradation of the broadcast signals caused by quadrature amplitude modulated (QAM) channels.
The 1754C is available in all C-band ITU grid wavelengths.

Features
■ Standard ITU Grid Wavelengths
■ Advanced Analog Chip Design
■ Reduced Equipment Requirements in the Hub
■ OC-48 Pin Out
■ Telcordia Technologies™ 468 Compliant
■ Wide Temperature Range – Stable Even in Harsh Environments
■ RoHS Compliant

Applications
■ CATV Broadcast Networks
■ Networks with Limited Fiber
■ Archtectures Using Separate Optical Wavelengths to Carry Targeted Services

12345678910 Next

All Rights Reserved© datasheetbank.com  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]