datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

P/N + Description + Content Search

Search Word's :
Description : TaNFilm® High Temperature DIP and SIP Networks

TaNFilm® High Temperature DIP and SIP Networks

The IRC 1900HT and 4700HT Series is the ultimate combination of precision performance, reliability, and long term stability in a low profile, TaNFilm® DIP and SIP packages. The rugged welded lead construction combined with the inherent passivation characteristics of tantalum nitride film insure superior continuous performance in high temperature Applications over the installed life of the part.

1900HT / 4700HT SERIES
• Inherent reliability
• Custom configurations available
• Bonded leads not susceptible to solder reflow problems
• Absolute tolerence to ±0.1% - ratio accuracy to ±0.05%
• Absolute TCR to ±25 ppm/°C - ratio tracking to ±5ppm/°C

Description : 400W TRANSIENT VOLTAGE SUPPRESSORS

Features
● Glass Passivated Die Construction
● 400W Peak Pulse Power Dissipation
● 6.8V – 440V Standoff Voltage
● Uni- and Bi-Directional Versions Available
● Excellent Clamping Capability
● Fast Response Time
● Plastic Case Material has UL Flammability
   Classification Rating 94V-O

Description : 1.27mm Pitch Multi-function Two Piece Connector

■ Features
1. Various connection with various product line
2. Easy One-Touch Operation
   The ribbon cable connection type allows easy one-touch operation with either single hand.
3. Board to board type
   ① Flux swell prevention
      The straight through hole type takes the complete fluxtight action from the board back side at solder DIPping. The type is prepared, corresponding to whether or not cleaning is required.
   ② Stack height 12mm to 16mm
      The board stack height can be set to every 1 mm unit up to 12 to 16mm.
   ③ Mis-insertion preventive mechanism
      The mating area is designed in a mechanism so as to prevent mis-insertion, and complete countermeasures have been taken against wrenching.
4. Board to cable type
   ① Complete lock with easy operation
      Employing the inner lock system, complete lock and eject actions can be performed with easy operation.
   ② Applicable cable
      The applicable cable is the AWG#28 flat cable (7/0.127mm), and the jacket size is 0.9±0.1mm.
5. SMT type
   Strength security with metaltab
      The right angle type is equipped with metaltab to secure soldering strength, and constructed so as to fix by screws. The straight type can choose whether or not metaltab are required.
  
Applications
  Computers, peripheral equipments, various machines etc.

 

Description : Stacking Height 5 to 11mm Half Pitch Connector

■Features
The FX4 series is a miniature board to board connectors, where the stacking height can be set at the 1mm interval. According to the mounting method, you can select the product from the through hole type and SMT type.
●Through hole Type
1. Small and Light
The mounting space and weight is reduced about 30%, compared to the conventional product (HRS FX2 series), respectively, and the mounting area about 70% reduced, compared to the conventional one.
2. Stacking Height 5 to 11mm
The board to board stacking height can be set per 1mm from 5mm up to 11mm.
3. Flux Swell Prevention
When solder is DIPped, the flux swell from the board rear side is completely prevented.
4. Mis-insertion Prevention and Low
Insertion/Extraction Force Mechanism The connection area is designed to completely prevent the
mis-insertion. Moreover, the low insertion/extraction mechanism is adopted.
●SMT Type
1. Small and Light
The mounting space and weight is reduced about 40%, compared with the conventional product (HRS FX2 series), and the mounting area is reduced 80%, compared to the conventional one.
2. Stacking Height 6 to 11mm
The board to board stacking height can be set per 1mm from 6mm up to 11mm. In addition, the height can be also set in combination with the through hole type.
3. Mis-insertion Prevention and Low
Insertion/Extraction Structure The connection area is designed to completely prevent the mis-insertion. Moreover, the low insertion/extraction force mechanism is adopted.
4. Positioning Boss Selectable
According to the mounting condition, it is selected whether or not the boss is required. Regarding the boss attached type, the boss eccentric position can stabilize the mounting direction.

Description : 1.27mm Pitch Multi-function Two Piece Connector

■ Features
1. Various connection with various product line
2. Easy One-Touch Operation
    The ribbon cable connection type allows easy one-touch operation
    with either single hand.   
3. Board to board type
    ① Flux swell prevention
        The straight through hole type takes the complete flux
        tight action from the board back side at solder DIPping.
        The type is prepared, corresponding to whether or not
        cleaning is required.
    ② Stack height 12mm to 16mm
        The board stack height can be set to every 1 mm unit up
        to 12 to 16mm.
    ③ Mis-insertion preventive mechanism
        The mating area is designed in a mechanism so as to
        prevent mis-insertion, and complete countermeasures
        have been taken against wrenching.
4. Board to cable type
    ① Complete lock with easy operation
        Employing the inner lock system, complete lock and eject
        actions can be performed with easy operation.
    ② Applicable cable
        The applicable cable is the <UL2651>AWG#28 flat cable
        (7/0.127mm), and the jacket size is 0.9±0.1mm.
5. SMT type
    Strength security with metaltab
        The right angle type is equipped with metaltab to secure
        soldering strength, and constructed so as to fix by
        screws. The straight type can choose whether or not
        metaltab are required.
   
Applications
    Computers, peripheral equipments, various machines etc.
   

Part Name(s) : LA7687 LA7687A
SANYO
SANYO -> Panasonic
Description : Application (TV Horizontal Synthesizer Circuit) / DIP 52P

LA7687 Datasheet Pinout : Sanyo 52Pin, TV Horizontal Synthesizer Circuit.

Description : GANG PROGRAMMERS FOR ST62 MCU FAMILY

DESCRIPTION
The ST62 gang programmers are designed for programming up to 10 EPROM or OTP devices. It can run either in standalone or remote mode under control of a Windows compatible PC.
In standalone mode, the target ST62 MCUs are programmed with a simple key operation directly from a master EPROM memory or from a master EPROM MCU. Two color LEDs indicate for each target device the operational pass or fail. Both VERIFY and BLANK CHECK functions are pro vided.
In Remote mode, the gang programmer is connected to a PC through an RS232 serial channel. Object code in either S19 or INTEL HEX format is read from disk files to program the target devices.
The Windows software also offers VERIFY, BLANK CHECK, READ master and other utility functions. The software allows various user friend ly facilities, such as re-instating the same pro gramming session, user selectable programming steps.
The gang programmer is made up of a two parts, a base unit common to all ST62XX devices and a dedicated package adaptator.

HARDWARE FEATURES
■ Programs simultaneously up to 10 ST62Exx EPROM and OTP MCUs
■ Standalone and PC driven modes
DIP and SO packages supported

SOFTWARE FEATURES
■ Windows based software
■ S19 or INTEL hex file format

Part Name(s) : NTE1632
NTE-Electronic
NTE Electronics
Description : Integrated Circuit Vertical/Horizontal Sync Separator

Description:
The NTE1632 separates the Horizontal and vertical sync pulses from the composite TV video signal and uses them to synchronize vertical and Horizontal oscillators. The NTE1632 is supplied in a 18−Lead DIP type package.

Features:
 Horizontal sync separator & noise inverter
 Horizontal oscillator
 Horizontal phase detector (sync to oscillator)
 Horizontal output stage
 Inhibit of Horizontal phase detector & video transmitter identification Circuit during vertical oscillator flyback
 Stabilizer & supply Circuit for staring the Horizontal oscillator & output stage directly from the mains rectifier
 Duty factor of Horizontal output pulse is 50% when flyback pulse is absent
 Vertical sync separator
 Vertical comparator with internal 3% precorrection Circuit for vertical oscillator/sawtooth generator
 Vertical driver stage
 Vertical blanking pulse generator with external adjustment of pulse duration (50Hz: 21 lines: 60Hz: 17 lines)
 Vertical guard Circuit
 Bandgap 6.5V reference voltage for vertical oscillator & comparator
 Synchronized vertical oscillator/sawtooth generator (synchronization inhibited when no video transmitter is detected)
 Time constant switch for phase detector (fast time constant during catching)
 Slow time constant for noise only conditions
 Time constant externally switchable (e.g. fast for VCR)
 Second phase detector for storage compensation of Horizontal deflection stage
 Sandcastle pulse generator (3 levels)
 Video transmitter identification Circuit
 Internal Circuit for 3% parabolic precorrection of the oscillator/sawtooth generator. Comparator supplied with precorrected sawtooth & external feedback input

 

Part Name(s) : NTE7063
NTE-Electronic
NTE Electronics
Description : Integrated Circuit CRT Display Synchronization Deflection Circuit

Description:
The NTE7063 is a sync–deflection Circuit IC dedicated to CRT display use. It can be connected to the NTE1773, NTE1797, or the NTE1855 (for vertical output use) to form a sync–deflection Circuit that meets every requirement for CRT use.
So far, ICs for color TV use have been applied to the sync–deflection Circuit for CRT display use and general purpose ICs such as one–shot multivibrators, inverters, and a lot of transistors have been used to form the peripherals such as sync input interface, Horizontal phase shifter. The NTE7063 contains these peripherals on chip and adopts a stable Circuit for Horizontal oscillation from 15kHz to 100kHz aiming at improving the characteristics required for CRT display use.
The NTE7063 has independent GND pins for the Horizontal block and vertical block, thus facilitating pattern layout for Applications where the NTE7063 is used at high frequencies.

Features:
• The Vertical Pull–In Range is Approximately 10Hz at fV = 60Hz.
• The Horizontal Oscillation Frequency can be Adjusted Stably from 15kHz to 100kHz.
• The Horizontal Display can be Shifted Right/Left.
• The Horizontal/Vertical Sync Input can be Used Intact Regardless of the Difference in Pulse Polarity and Pulse Width.
• The AFC Feedback Sawtooth Wave can be Obtained by Simply Applying a Flyback Pulse to the IC as a Trigger Pulse.
• Any Duty of the Horizontal Pulse can be Set.
• Good Vertical Linearity because DC Bias at Vertical Output Stage is Subjected to Sampling Control Within Retrace Time.
• Excellent Interlace and Vertical Jitter Characteristics on the High–Definition Display Because of Independent GND Pins for the Horizontal Block and Vertical Block.

On–Chip Functions:
Horizontal Block
• AFC
Horizontal OSC
• X–Ray Protector
Horizontal Phase Shifter
• AFC Sawtooth Wave Generator
Horizontal Pulse Duty Setting

Vertical Block
• Vertical OSC
• Vertical Sawtooth Wave Generator
• Sampling Type DC Voltage Control

 

Part Name(s) : NTE7086
NTE-Electronic
NTE Electronics
Description : Integrated Circuit Sync Deflection Circuit for CRT Display

Description:
The NTE7086 is a sync•deflection Circuit IC in a 20–Lead DIP type package dedicated to CRT display use. This device can be connected to the NTE1773/NTE1797 (for vertical output use) to form a sync•deflection Circuit that meets every requirement for CRT display use.
So far, IC’s for color TV use have been applied to the sync•deflection Circuit for CRT display use and general–purpose IC’s such as one–shot multivibrators, inverters, and a lot of transistors have been used to form the peripherals such as the sync input interface and Horizontal phase shifter.
The NTE7086 contains these peripherals on chip and adopts a stable Circuit for Horizontal oscillation from 15kHz to 100kHz aiming at improving the characteristics required for CRT display use.

Features:
• The Horizontal Oscillation Frequency can be Adjusted Stably from 15kHz to 100kHz.
• The Horizontal Display can be Shifted Right/Left.
• The Horizontal/Vertical Sync Input can be used intact Regardless of the Difference in Pulse Polarity and Pulse Width.
• The AFC Feedback Sawtooth Wave can be Obtained by Simply Applying a Flyback Pulse to the IC as a Trigger Pulse.
• Any Duty of the Horizontal Pulse Can be Set.
• Good Linearity because DC Bias at Vertical Output Stage is Subjected to Sampling Control within Retrace Time.

On–Chip Functions:
Horizontal Block
• AFC
Horizontal OSC
• X–Ray Protector
Horizontal Phase Shifter
• AFC Sawtooth Wave Generator
Horizontal Pulse Duty Setting

Vertical Block
• Vertical OSC
• Vertical Sawtooth Wave Generator
• Sampling Type DC Voltage Control

12345678910 Next

All Rights Reserved© datasheetbank.com  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]