ScopeThis specification documents the detail requirements for space qualified product manufactured on Analog Devices, Inc.s QML certified line per MIL-PRF-38535 Level V except as modified herein.
The manufacturing flow described in the STANDARD SPACE LEVEL PRODUCTS PROGRAM brochure is to be considered a part of this specification. //www.analog.com/aerospace.
This data sheet specifically details the space grade version of this product. A more detailed operational description and a complete data sheet for commercial product grades can be found at www.analog.com/AD9814.
General DescriptionThe MM74HC4051, MM74HC4052 and MM74HC4053 multiplexers are digitally controlled analog switches implemented in advanced silicon-gate CMOS technology. Features■ Wide analog input voltage range: ±6V■ Low “on” resistance: 50 typ. (VCC–VEE = 4.5V) 30 typ. (VCC–VEE = 9V)■ Logic level translation to enable 5V logic with ±5V analog signals■ Low quiescent current: 80 µA maximum (74HC)■ Matched Switch characteristic
The AD9887 offers designers the flexibility of a dual analog and digital interface for flat panel displays (FPDs) on a single chip. Both interfaces are optimized for excellent image quality supporting
display resolutions up to SXGA (1280 ×1024 at 75 Hz). Either the analog or the digital interface can be selected by the user.
140 MSPS Maximum Conversion Rate
330 MHz Analog Bandwidth
0.5 V to 1.0 V Analog Input Range
500 ps p-p PLL Clock Jitter at 140 MSPS
3.3 V Power Supply
Full Sync Processing
4:2:2 Output Format Mode
1 FEATURES• Four analog inputs, internal analog source selectors,e.g. 4×CVBS or 2×Y/C or (1×Y/C and 2×CVBS)• Two analog preprocessing channels• Fully programmable static gain for the main channels orautomatic gain control for the selected CVBS or Y/Cchannel• Switchable white peak control• Two built-in analog anti-aliasing filters• Two 8-bit video CMOS analog-to-digital converters(ADCs)• On-chip clock generator• Line-locked system clock frequencies• Digital PLL for H-sync processing and clock generation• Requires only one crystal (24.576 MHz) for all standards• Horizontal and vertical sync detection
The AD73411 is a single device incorporating a single analog front end (AFE) and a microcomputer optimized for digital signal processing (DSP) and other high-speed numeric processing applications.
High-Performance Silicon-Gate CMOS
The IN74HC4053A utilize silicon-gate CMOS technology to achieve fast propagation delays, low ON resistances, and low OFF leakage currents. These analog multiplexers/demultiplexers control analog voltages that may vary across the complete power supply range (from VCC to VEE).
The Channel-Select inputs determine which one of the Analog Inputs/Outputs is to be connected, by means of an analog switch, to the Common Output/Input.When the Enable pin is high, all analog switches are turned off.
The Channel-Select and Enable inputs are compatible with standard CMOS outputs; with pullup resistors, they are compatible with LS/ALSTTL outputs.
• Fast Switching and Propagation Speeds
• Low Crosstalk Between Switches
• Diode Protection on All Inputs/Outputs
• Analog Power Supply Range (VCC-VEE)=2.0 to 12.0 V
• Digital (Control) Power Supply Range (VCC-GND)=2.0 to 6.0 V
• Low Noise
CMOS 4/8 Chaannel Analog Multiplexers