P/N + Description + Content Search

QFN-16B (4x4x0.75mm)

QFN-16C (3x3x0.75mm)

The  FT2232H  is  FTDI‟s  5th generation  of  USB devices.  The  FT2232H  is  a  USB  2.0  High Speed (480Mb/s) to UART/FIFO IC. It has the capability  of  being  configured  in  a  variety  of

industry  standard  serial  or  parallel  interfaces.

QFN-16

The AS3993 UHF reader chip is the next generation integrated  analog  front  end  and  protocol  handling system for a 900MHz RFID reader system from austriamicrosystems. It is a completely new architecture from the AS3992 and is optimized for low voltage, low power applications down to 2.7V.

1. GEN2 Reader IC with DRM

2. Tolerance against Self Jammer

3. Operation down to 2.7V

4. Current consumption 80mA

The AS3993 UHF reader chip is the next generation integrated  analog  front  end  and  protocol  handling system for a 900MHz RFID reader system from austriamicrosystems. It is a completely new architecture from the AS3992 and is optimized for low voltage, low power applications down to 2.7V.

1. GEN2 Reader IC with DRM

2. Tolerance against Self Jammer

3. Operation down to 2.7V

4. Current consumption 80mA

KK 156 HOUSING PCB 41815 SERIES

General Description
The ICS9120-48 is a high performance frequency generator designed to support digital compact disk drive systems. It offers all clock frequencies required for the servo and decoder sections of these devices. These frequencies are synthesized from a single 16.9344 MHz on-chip oscillator.

Features
• Generates the output clock frequencies required by CD-ROM drive systems
• Single 16.9344 MHz crystal or system clock reference
• 100ps one sigma jitter
• Output rise/fall times less than 2.0ns (at 5V VDD)
• On-chip loop filter components
• 3.0V-5.5V supply range
• 150 ppm output frequency accuracy
• 8-pin, 150-mil SOIC

Applications
• Specifically designed to support CD-ROM drive requirements of multimedia applications

[Broadband TelCom Power, Inc.]

Description
The HQ series of high current, high efficiency DC/DC converters offer current levels that exceed all other quarterbricks and are comparable to existing quarter-bricks. With a wide input voltage range of 36-75V they are available with an output voltage of either 1.5, 1.8, 2.5 or 3.3 Volts. All models feature an input filter, input undervoltage lockout, output overvoltage and overtemperature protection, output current limiting and short circuit protection. The unique openframe construction with aluminum heat spreader design achieves efficient heat transfer with no hot spots. The use of patented Flat Matrix Transformer technology and other patent-pending design concepts facilitate maximum power delivered with the highest efficiency up to 91%. The converters combine creative design concepts with highly derated power devices to achieve very high reliability, high performance and offer a low cost solution to systems designers that are challenged to maximize power and minimize board space.

Features
• Delivers up to 50A in Quarter Brick
• High efficiency patented topology
• Low profile of only 0.48 inch
• 1.5V, 1.8V,2.5V or 3.3V output modules
• 100V/100ms Input transient capability
• -40°C to +85 °C ambient operation
• Meets Basic Insulation requirements of EN60950
• UL 1950 recognized, CAN / CSA C22.2 No. 950-95
   Certified, and TUV EN60950 ( pending )
• Meets conducted limits of FCC Class B and CEI
   IEC61204-3 Class B with external filter

Applications
• Telecommunications
• Data Communications
• Wireless Communications
• Networking Gear
• Servers, Switches and Data Storage
• Semiconductor Test Equipment
• Distributed Power Architecture

KEY FEATURES
■ Power Module for PCB Mountable
■ High Efficiency Up To 87%
■ 2:1 Input Rang
■ Six-sided Continuous Shield
■ Standard Package
■ Screw Terminal For Optional
■ 2 Years Product Warranty