datasheetbank_Logo     Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

P/N + Description + Content Search

Search Words :

Part Name(s) : 74017 CX74017 Skyworks
Skyworks Solutions
Description : On the Direct CONVERSION RECEIVER View

Introduction
Very much like its well-established superheterodyne RECEIVER counterpart, introduced in 1918 by Armstrong [1], the origins of the DCR date back to the first half of last century when a SINGLE down-CONVERSION RECEIVER was first described by F.M. Colebrook in 1924 [2], and the term homodynewas applied. Additional developments led to the publication in 1947 of an article by D. G. Tucker [3], which first coined the term synchrodyne, in a RECEIVER, which was designed as a precision demodulator for measurement equipment rather than a radio. Another paper by the latter in 1954 [4] reports the various SINGLE down-CONVERSION RECEIVERs published at the time, and clarifies the difference between the homodyne (sometimes referred to as coherent detector) and the synchrodyne RECEIVERs: the former obtains the Local Oscillator (LO) directly, for example, from the transmitter, whereas the latter synchronizes a free-running LO to the incoming carrier.

 

Part Name(s) : SP000012902 TDA5201 Infineon
Infineon Technologies
Description : ASK SINGLE CONVERSION RECEIVER View

General Description
The IC is a very low power consumption SINGLE chip ASK SINGLE CONVERSION RECEIVER for receive frequencies between 310 MHz and 350 MHz. The RECEIVER offers a high level of integration and needs only a few external components. The device contains a low noise amplifier (LNA), a double balanced mixer, a fully integrated VCO, a PLL synthesizer, a crystal oscillator, a limiter with RSSI generator, a data filter, a data comparator (slicer) and a peak detector. Additionally there is a power down feature to save battery life.

Features
• Low supply current (Is = 4.6 mA typ.)
• Supply voltage range 5 V ±10 %
• Power down mode with very low supply current (50 nA typ)
• Fully integrated VCO and PLL Synthesizer
• RF input sensitivity < – 110 dBm
• Selectable frequency ranges around 315 MHz and 345 MHz
• Selectable reference frequency
• Limiter with RSSI generation, operating at 10.7 MHz
• 2nd order low pass data filter with external capacitors
• Data slicer with self-adjusting threshold

Application
• Keyless Entry Systems
• Remote Control Systems
• Fire Alarm Systems
• Low Bitrate Communication Systems

Part Name(s) : SP000016381 TDA5200 Infineon
Infineon Technologies
Description : ASK/FSK SINGLE CONVERSION RECEIVER View

The IC is a very low power consumption SINGLE chip ASK SINGLE CONVERSION RECEIVER for receive frequencies bands 868-870 MHz and 433-435 MHz. The IC offers a highlevel of integration and needs only a few external components. The device contains a low noise amplifier (LNA), a double balanced mixer,a fully integrated VCO, a PLL synthesizer, a crystal oscillator, a limiter with RSSI generator, a data filter, a datacomparator (slicer) and a peak detector. Additionally there is a power down feature to save battery life.

Features
• Low supply current (Is = 4.8 mA typ. at 868 MHz, Is = 4.6 mA typ. at 434 MHz)
• Supply voltage range 5 V ±10 %
• Power down mode with very low supply current (50 nA typ)
• Fully integrated VCO and PLL Synthesizer
• RF input sensitivity < – 107 dBm
• Selectable frequency ranges around 868-870 MHz and 433-435 MHz
• Selectable reference frequency
• Limiter with RSSI generation, operating at 10.7 MHz
• 2nd order low pass data filter with external capacitors
• Data slicer with self-adjusting threshold

Application
• Keyless Entry Systems
• Remote Control Systems
• Alarm Systems
• Low Bitrate Communication Systems

Part Name(s) : MC3363 MC3363DW Motorola
Motorola => Freescale
Description : LOW POWER DUAL CONVERSION FM RECEIVER View

LOW POWER DUAL CONVERSION FM RECEIVER

The MC3363 is a SINGLE chip narrowband VHF FM radio RECEIVER. It is a dual CONVERSION RECEIVER with RF amplifier transistor, oscillators, mixers, quadrature detector, meter drive/carrier detect and mute circuitry. The MC3363 also has a buffered first local oscillator output for use with frequency synthesizers, and a data slicing comparator for FSK detection.

•Wide Input Bandwidth – 200 MHz Using Internal Local Oscillator
                               – 450 MHz Using External Local Oscillator
•RF Amplifier Transistor
•Muting Operational Amplifier
•Complete Dual CONVERSION
•Low Voltage: VCC= 2.0 V to 6.0 Vdc
•Low Drain Current: ICC= 3.6 mA (Typical) at VCC= 3.0 V, Excluding RF Amplifier Transistor
•Excellent Sensitivity: Input 0.3 µV (Typical) for 12 dB SINAD Using Internal RF Amplifier Transistor
•Data Shaping Comparator
•Received Signal Strength Indicator (RSSI) with 60 dB Dynamic Range
•Low Number of External Parts Required
•Manufactured in Motorola′s MOSAICProcess Technology


Part Name(s) : TDA5211 Infineon
Infineon Technologies
Description : ASK/FSK SINGLE CONVERSION RECEIVER View

General Description
The IC is a very low power consumption SINGLE chip FSK/ASK Superhet erodyne RECEIVER (SHR) for the frequency band 310 to 350 MHz that is pin compatible with the ASK RECEIVER TDA5201. The IC offers a high level of integration and needs only a few external components. The device contains a low noise amplifier (LNA), a double balanced mixer, a fully integrated VCO, a PLL synthesiser, a crystal oscillator, a limiter with RSSI genera
tor, a PLL FSK demodulator, a data filter, a data comparator (slicer) and a peak detector. Additionally there is a

Features
■ Low supply current (Is = 5.7 mA typ. in FSK mode, Is = 5 mA typ. in ASK mode)
■ Supply voltage range 5V ±10%
■ Power down mode with very low supply current (50nA typ.)
■ FSK and ASK demodulation capability
■ Fully integrated VCO and PLL Synthesiser
ASK sensitivity better than
  -110 dBm over specified temperature range (- 40 to +105°C)
■ Selectable frequency ranges 310-330 MHz and 330-350 MHz
■ Limiter with RSSI generation,operating at 10.7MHz
■ Selectable reference frequency
■ 2nd order low pass data filter with external capacitors
■ Data slicer with self-adjusting threshold
■ FSK sensitivity better than
  -102 dBm over specified temperature range (- 40 to +105°C)

Part Name(s) : TDA5212 Infineon
Infineon Technologies
Description : ASK/FSK 915MHz SINGLE CONVERSION RECEIVER View

The IC is a very low power consumption SINGLE chip FSK/ASK Superheterodyne RECEIVER (SHR) for receive frequencies between 902 and 928 MHz that is pin compatible to the ASK RECEIVER TDA5202. The IC offers a high level of integration and needs only a few external components. The device contains a low noise amplifier (LNA), a double balanced mixer, a fully integrated VCO, a PLL synthesiser, a crystal oscillator, a limiter with RSSI generator, a PLL FSK demodulator, a data filter, a data comparator (slicer) and a peak detector. Additionally there is a power down feature to save battery life.

Features
■ Low supply current (Is = 5.4 mA typ.FSK mode, 4.8 mA typ. ASK mode)
■ Supply voltage range 5V ±10%
■ Power down mode with very low supply current (90nA typ.)
■ FSK and ASK demodulation capability
■ Fully integrated VCO and PLL Synthesiser
■ RF input sensitivity ASK -112dBm typ. at 25°C, better than -109dBm over complete specified operating temperature range (-40 to +85°C)
■ RF input sensitivity FSK -105dBm typ. at 25°C, better than -102dBm over complete specified operating temperature range (-40 to +85°C)
■ Receive frequency range between 902 and 928 MHz
■ Selectable reference frequency
■ Limiter with RSSI generation, operating at 10.7MHz
■ 2nd order low pass data filter with external capacitors
■ Data slicer with self-adjusting threshold

Application
■ Keyless Entry Systems
■ Remote Control Systems
■ Low Bitrate ISM-band Communication Systems

Part Name(s) : TDA5210 Q67037-A1100 Infineon
Infineon Technologies
Description : ASK/FSK SINGLE CONVERSION RECEIVER View

General Description
The IC is a very low power consumption SINGLE chip FSK/ASK Superheterodyne RECEIVER (SHR) for the frequency bands 810 to 870 MHz and 400 to 440 MHz that is pin compatible with the ASK RECEIVER TDA5200. The IC offers a high level of integration and needs only a few external components. The device contains a low noise amplifier (LNA), a double balanced mixer, a fully integrated VCO, a PLL synthesiser, a crystal oscillator, a limiter with RSSI generator, a PLL FSK demodulator, a data filter, a data comparator (slicer) and a peak detector. Additionally there is a power down feature to save battery life.

Features
■ Low supply current (typ. at 868MHz
   Is = 5.9mA in FSK mode,
   Is = 5.2mA in ASK mode)
■ Supply voltage range 5V ±10%
■ Power down mode with very low
   supply current (50nA typ)
■ FSK and ASK demodulation capability
■ Fully integrated VCO and PLL Synthesiser
ASK sensitivity < –107dBm
■ Selectable frequency ranges 810-870 MHz and 400-440 MHz
■ Limiter with RSSI generation, operating at 10.7MHz
■ Selectable reference frequency
■ 2nd order low pass data filter with external capacitors
■ Data slicer with self-adjusting threshold
■ FSK sensitivity <-100dBm

Application
■ Keyless Entry Systems
■ Remote Control Systems
■ Alarm Systems
■ Low Bitrate Communication Systems

Part Name(s) : 5503-CGT 5503DCR TDK
TDK Corporation
Description : Direct CONVERSION RECEIVER View

DESCRIPTION
The 5503 is a low cost, high performance direct CONVERSION RECEIVER (DCR) specifically designed for digital wireless applications. The DCR architecture provides a RECEIVER design with fewer external components than the conventional dual CONVERSION approach. The 5503 is designed to operate over an input frequency range of 950 to 1450 MHz. The device accepts an input signal in this frequency range and down converts directly to baseband. The local oscillator signal is generated by a completely integrated phase lock loop that is fully programmable through a standard serial port interface.

FEATURES
• Wideband I/Q demodulator
   – RF input 950 to 1450 MHz
   – External lowpass filter
   - Integrated post-filter baseband drivers
• Integrated VCO and frequency synthesizer
• AGC Amplifier

APPLICATIONS
• Digital Satellite
• VSAT RECEIVERs

 

Part Name(s) : 5504-CGT 5504DCR TDK
TDK Corporation
Description : Direct CONVERSION RECEIVER View

DESCRIPTION
The 5504 is a low cost, high performance direct CONVERSION RECEIVER (DCR) specifically designed for digital wireless applications. The DCR architecture provides a RECEIVER design with fewer external components than the conventional dual CONVERSION approach. The 5504 is designed to operate over an input frequency range of 950 to 2150 MHz. The device accepts an input signal in this frequency range and down converts directly to baseband. The local oscillator signal is generated by a completely integrated phase lock loop that is fully programmable through a standard serial port interface.

FEATURES
• Wideband I/Q demodulator
   – RF input 950 to 2150 MHz
   – External lowpass filter
   - Integrated post-filter baseband drivers
• Integrated VCO and frequency synthesizer
• AGC Amplifier

APPLICATIONS
• Digital Satellite
• VSAT RECEIVERs

 

1

2345678910 Next

All Rights Reserved © datasheetbank.com 2014 - 2019 [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]