datasheetbank_Logo    Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site
Part Name  

P/N + Description + Content Search

Search Words :

Part Name(s) : ADC08200_06 ADC08200CIMT_06 ADC08200CIMTX_06 ADC08200EVAL_06 National-Semiconductor
National ->Texas Instruments
Description : 8-BIT, 20 MSPS to 200 MSPS, 1.05 mW/MSPS A/D CONVERTER with Internal Sample-and-Hold

General Description
The ADC08200 is a low-power, 8-BIT, monolithic analog-to-digital CONVERTER with an on-chip track-and-hold circuit. Optimized for low cost, low power, small size and ease of use, this product operates at conversion rates up to 230 MSPS while consuming just 1.05 mW per MHz of clock frequency, or 210 mW at 200 MSPS. Raising the PD pin puts the ADC08200 into a Power Down mode where it consumes about 1 mW.
The unique architecture achieves 7.3 Effective Bits with 50 MHz input frequency. The ADC08200 is resistant to latch-up and the outputs are short-circuit proof. The top and bottom of the ADC08200’s reference ladder are available for connections, enabling a wide range of input possibilities. The digital outputs are TTL/CMOS compatible with a separate output power supply pin to support interfacing with 3V or 2.5V logic. The digital inputs (CLK and PD) are TTL/CMOS compatible. The output data format is straight binary.
The ADC08200 is offered in a 24-lead plastic package (TSSOP) and, while specified over the industrial temperature range of −40˚C to +85˚C, it will function over the to −40˚C to +105˚C temperature range. An evaluation board is available to assist in the easy evaluation of the ADC08200.

Features
■ Single-ended input
■ Internal sample-and-hold function
■ Low voltage (single +3V) operation
■ Small package
■ Power-down feature

Key Specifications
■ Resolution 8 Bits
■ Maximum sampling frequency 200 MSPS (min)
■ DNL ±0.4 LSB (typ)
■ ENOB (fIN= 50 MHz) 7.3 bits (typ)
■ THD (fIN= 50 MHz) 61 dB (typ)
■ Power Consumption
   — Operating 1.05 mW/MSPS (typ)
   — Power Down 1 mW (typ)

Applications
■ Flat panel displays
■ Projection systems
■ Set-top boxes
■ Battery-powered instruments
■ Communications
■ Medical imaging
■ Astronomy

View
Part Name(s) : AD9054 AD9054/PCB AD9054BST-135 AD9054BST-200 AD9054PCB ADI
Analog Devices
Description : 8-BIT, 200 MSPS A/D CONVERTER

GENERAL DESCRIPTION
The AD9054 is an 8-BIT monolithic analog-to-digital CONVERTER optimized for high speed, low power, small size and ease of use. With a 200 MSPS encode rate capability and full-power analog bandwidth of 350 MHz, the component is ideal for applications requiring the highest possible dynamic performance. To minimize system cost and power dissipation, the AD9054 includes an internal +2.5 V reference and track-and-hold circuit. The user provides only a +5 V power supply and an encode clock. No external reference or driver components are required for many applications.

FEATURES
200 MSPS Guaranteed Conversion Rate
135 MSPS Low Cost Version Available
350 MHz Analog Bandwidth
1 V p-p Analog Input Range
Internal +2.5 V Reference and T/H
Low Power: 500 mW
+5 V Single Supply Operation
TTL Output Interface
Single or Demultiplexed Output Ports

APPLICATIONS
RGB Graphics Processing
High Resolution Video
Digital Data Storage Read Channels
Digital Communications
Digital Instrumentation
Medical Imaging
 

View
Part Name(s) : ADC08200CIMT ADC08200CIMTX ADC08200EVAL ADC08200 National-Semiconductor
National ->Texas Instruments
Description : 8-BIT, 20 MSPS to 200 MSPS, Low Power A/D CONVERTER with Internal Sample-and-Hold

General Description
The ADC08200 is a low-power, 8-BIT, monolithic analog-to-digital CONVERTER with an on-chip track-and-hold circuit. Optimized for low cost, low power, small size and ease of use, this product operates at conversion rates up to 230 MSPS while consuming just 1.05 mW per MHz of clock frequency, or 210 mW at 200 MSPS. Raising the PD pin puts the ADC08200 into a Power Down mode where it consumes about 1 mW.
The unique architecture achieves 7.3 Effective Bits with 50 MHz input frequency. The ADC08200 is resistant to latch up and the outputs are short-circuit proof. The top and bottom of the ADC08200s reference ladder are available for connections, enabling a wide range of input possibilities. The digital outputs are TTL/CMOS compatible with a separate output power supply pin to support interfacing with 3V or 2.5V logic. The digital inputs (CLK and PD) are TTL/CMOS compatible. The output data format is straight binary. The ADC08200 is offered in a 24-lead plastic package
(TSSOP) and, while specified over the industrial temperature range of −40°C to +85°C, it will function over the to −40°C to +105°C temperature range. An evaluation board is available to assist in the easy evaluation of the ADC08200.

Features
■ Single-ended input
■ Internal sample-and-hold function
■ Low voltage (single +3V) operation
■ Small package
■ Power-down feature

Key Specifications
■ Resolution 8 Bits
■ Maximum sampling frequency 200 MSPS (min)
■ DNL ±0.4 LSB (typ)
■ ENOB (fIN= 50 MHz) 7.3 bits (typ)
■ THD (fIN= 50 MHz) 61 dB (typ)
■ Power Consumption
   — Operating 1.05 mW/MSPS (typ)
   — Power Down 1 mW (typ)

Applications
■ Flat panel displays
■ Projection systems
■ Set-top boxes
■ Battery-powered instruments
■ Communications
■ Medical imaging
■ Astronomy

View
Part Name(s) : AD9054A AD9054A/PCB AD9054ABST-135 AD9054ABST-200 AD9054ABSTZ-135 AD9054ABSTZ-200 AD9054APCB ADI
Analog Devices
Description : 8-BIT, 200 MSPS A/D CONVERTER

GENERAL DESCRIPTION
The AD9054A is an 8-BIT monolithic analog-to-digital CONVERTER optimized for high speed, low power, small size and ease of use. With a 200 MSPS encode rate capability and full-power analog bandwidth of 350 MHz, the component is ideal for applications requiring the highest possible dynamic performance. To minimize system cost and power dissipation, the AD9054A includes an internal +2.5 V reference and track-and-hold circuit. The user provides only a +5 V power supply and an encode clock. No external reference or driver components are required for many applications.

FEATURES
200 MSPS Guaranteed Conversion Rate
135 MSPS Low Cost Version Available
350 MHz Analog Bandwidth
1 V p-p Analog Input Range
Internal +2.5 V Reference and T/H
Low Power: 500 mW
+5 V Single Supply Operation
TTL Output Interface
Single or Demultiplexed Output Ports

APPLICATIONS
RGB Graphics Processing
High Resolution Video
Digital Data Storage Read Channels
Digital Communications
Digital Instrumentation
Medical Imaging

View
Part Name(s) : AD9211 AD9211-200 AD9211-200EB AD9211-200EBZ AD9211-250 AD9211-250EB AD9211-250EBZ AD9211-300 AD9211-300EBZ AD9211BCPZ-200 AD9211BCPZ-250 AD9211BCPZ-300 ADI
Analog Devices
Description : 10-Bit, 200 MSPS/250 MSPS/300 MSPS, 1.8 V Analog-to-Digital CONVERTER

GENERAL DESCRIPTION
The AD9211 is a 10-bit monolithic sampling analog-to-digital CONVERTER optimized for high performance, low power, and ease of use. The product operates at up to a 300 MSPS conversion rate and is optimized for outstanding dynamic performance in wideband carrier and broadband systems. All necessary functions, including a track-and-hold (T/H) and voltage reference, are included on the chip to provide a complete
signal conversion solution.

FEATURES
SNR = 60.1 dBFS @ fIN up to 70 MHz @ 300 MSPS
ENOB of 9.7 @ fIN up to 70 MHz @ 300 MSPS (−1.0 dBFS)
SFDR = −80 dBc @ fIN up to 70 MHz @ 300 MSPS (−1.0 dBFS)
Excellent linearity
  DNL = ±0.1 LSB typical
  INL = ±0.2 LSB typical
LVDS at 300 MSPS (ANSI-644 levels)
700 MHz full power analog bandwidth
On-chip reference, no external decoupling required
Integrated input buffer and track-and-hold
Low power dissipation
  437 mW @ 300 MSPS—LVDS SDR mode
  410 mW @ 300 MSPS—LVDS DDR mode
Programmable input voltage range 1.0 V to 1.5 V, 1.25 V nominal
1.8 V analog and digital supply operation
Selectable output data format (offset binary, twos complement, Gray code)
Clock duty cycle stabilizer
Integrated data capture clock

APPLICATIONS
Wireless and wired broadband communications
Cable reverse path
Communications test equipment
Radar and satellite subsystems
Power amplifier linearization

View
Part Name(s) : ADC08200 ADC08200CIMTX ADC08200CIMT ADC08200CIMT/NOPB ADC08200CIMTX/NOPB TI
Texas Instruments
Description : 8-BIT, 20 MSPS to 200 MSPS, Low Power A/D CONVERTER with Internal Sample and-Hold

DESCRIPTION
The ADC08200 is a low-power, 8-BIT, monolithic analog-to-digital CONVERTER with an on-chip track-and-hold circuit. Optimized for low cost, low power, small size and ease of use, this product operates at conversion rates up to 230 MSPS while consuming just 1.05 mW per MHz of clock frequency, or 210 mW at 200 MSPS. Raising the PD pin puts the ADC08200 into a Power Down mode where it consumes about 1 mW.
The unique architecture achieves 7.3 Effective Bits with 50 MHz input frequency. The ADC08200 is resistant to latch-up and the outputs are short-circuit proof. The top and bottom of the ADC08200s reference ladder are available for connections, enabling a wide range of input possibilities. The digital outputs are TTL/CMOS compatible with a separate output power supply pin to support interfacing with 3V or 2.5V logic. The digital inputs (CLK and PD) are TTL/CMOS compatible. The output data format is straight binary.
The ADC08200 is offered in a 24-lead TSSOP package and, while specified over the industrial temperature range of −40°C to +85°C, it will function over the to −40°C to +105°C temperature range.

FEATURES
• Single-Ended Input
• Internal Sample-and-Hold Function
• Low Voltage (Single +3V) Operation
• Small Package
• Power-Down Feature

KEY SPECIFICATIONS
• Resolution 8 Bits
• Maximum sampling frequency 200 MSPS (min)
• DNL ±0.4 LSB (typ)
• ENOB (fIN = 50 MHz) 7.3 bits (typ)
• THD (fIN = 50 MHz) 61 dB (typ)
• Power Consumption
   – Operating 1.05 mW/MSPS (typ)
   – Power Down 1 mW (typ)

APPLICATIONS
• Flat Panel Displays
• Projection Systems
• Set-Top Boxes
• Battery-Powered Instruments
• Communications
• Medical Imaging
• Astronomy

View
Part Name(s) : ADC08100MDC ADC08100MWC ADC08100CIMT ADC08100CIMTX National-Semiconductor
National ->Texas Instruments
Description : 8-BIT, 20 MSPS to 100 MSPS, 1.3 mW/MSPS A/D CONVERTER

General Description
The ADC08100 is a low-power, 8-BIT, monolithic analog-todigital CONVERTER with an on-chip track-and-hold circuit. Optimized for low cost, low power, small size and ease of use, this product operates at conversion rates of 20 MSPS to 100 MSPS with outstanding dynamic performance over its full operating range while consuming just 1.3 mW per MHz of clock frequency. That’s just 130 mW of power at 100 MSPS. Raising the PD pin puts the ADC08100 into a Power Down mode where it consumes just 1 mW.
   
Features
■ Single-ended input
■ Internal sample-and-hold function
■ Low voltage (single +3V) operation
■ Small package
■ Power-down feature
   
Applications
■ Flat panel displays
■ Projection systems
■ Set-top boxes
■ Battery-powered instruments
■ Communications
■ Medical scan CONVERTERs
■ X-ray imaging
■ High speed Viterbi decoders
■ Astronomy
   

View
Part Name(s) : ADC08100 ADC08100CIMTC ADC08100CIMTCX ADC08100EVAL National-Semiconductor
National ->Texas Instruments
Description : 8-BIT, 20 MSPS to 100 MSPS, 1.3 mW/MSPS A/D CONVERTER

General Description
The ADC08100 is a low-power, 8-BIT, monolithic analog-todigital CONVERTER with an on-chip track-and-hold circuit. Optimized for low cost, low power, small size and ease of use, this product operates at conversion rates of 20 MSPS to 100 MSPS with outstanding dynamic performance over its full operating range while consuming just 1.3 mW per MHz of clock frequency. Thats just 130 mW of power at 100 MSPS. Raising the PD pin puts the ADC08100 into a Power Down mode where it consumes just 1 mW.
   
Features
■ Single-ended input
■ Internal sample-and-hold function
■ Low voltage (single +3V) operation
■ Small package
■ Power-down feature
   
Applications
■ Flat panel displays
■ Projection systems
■ Set-top boxes
■ Battery-powered instruments
■ Communications
■ Medical scan CONVERTERs
■ X-ray imaging
■ High speed Viterbi decoders
■ Astronomy
   

View
Part Name(s) : AD9211-170EB AD9211BCPZ-170 ADI
Analog Devices
Description : 10-Bit, 170/200/250 MSPS 1.8 V A/D CONVERTER

PRODUCT DESCRIPTION
The AD9211 is a 10-Bit monolithic sampling analog-to-digital CONVERTER optimized for high performance, low power, and ease of use. The product operates up to a 250 MSPS conversion rate and is optimized for outstanding dynamic performance in wideband carrier and broadband systems. All necessary functions, including a track-and-hold (T/H) and voltage reference, are included on the chip to provide a complete signal conversion solution.

FEATURES
SNR = 60 dBFs @ fIN up to 70 MHz @ 250 MSPS
ENOB of 9.7 @ fIN up to 70 MHz @ 250 MSPS (–0.5 dBFS)
SFDR = 80 dBc@ fIN up to 70 MHz @ 250 MSPS (–0.5 dBFS)
Excellent Linearity
  DNL = ±0.3 LSB (Typical)
  INL = ±0.5 LSB (Typical)
LVDS at 250 MSPS (ANSI-644 levels)
900 MHz Full Power Analog Bandwidth
On-Chip Reference and Track-and-Hold
Power Dissipation = 380 mW Typical @ 250 MSPS
1.25 V Input Voltage Range
1.8 V Analog Supply Operation
Output Data Format Option
Data Clock Output Provided
Clock Duty Cycle Stabilizer

APPLICATIONS
Wireless and Wired Broadband Communications
Cable Reverse Path
Communications Test Equipment
Radar and Satellite Subsystems
Power Amplifier Linearization

View
Part Name(s) : ADC08L060 ADC08L060CIMT/NOPB ADC08L060CIMTX/NOPB ADC08L060CIMT Texas-Instruments
Texas Instruments
Description : 8-BIT, 10 MSPS to 60 MSPS, 0.65 mW/MSPS A/D CONVERTER with Internal Sample-and-Hold

DESCRIPTION
The ADC08L060 is a low-power, 8-BIT, monolithic analog-to-digital CONVERTER with an on-chip track-and- hold circuit. Optimized for low cost, low power, small size and ease of use, this product operates at conversion rates of 10 MSPS to 60 MSPS while consuming just 0.65 mW per MHz of clock frequency, or 39 mW at 60 MSPS. Raising the PD pin puts the ADC08L060 into a Power Down mode where it consumes about 1 mW.

FEATURES
• Single-ended input
• Internal sample-and-hold function
• Low voltage (single +3V) operation
• Small package
• Power-down feature

APPLICATIONS
• Digital Imaging
• Set-top boxes
• Portable Instrumentation
• Communication Systems
• X-ray imaging
• Viterbi decoders

View

1

2345678910 Next

 

All Rights Reserved © datasheetbank.com 2014 - 2019 [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]