datasheetbank_Logo     Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

P/N + Description + Content Search

Search Words :

Part Name(s) : ADC08200CIMT ADC08200CIMTX ADC08200EVAL ADC08200 National-Semiconductor
National ->Texas Instruments
Description : 8-BIT, 20 MSPS TO 200 MSPS, LOW POWER A/D CONVERTER WITH INTERNAL Sample-and-Hold View

General Description
The ADC08200 is a LOW-POWER, 8-BIT, monolithic analog-TO-digital CONVERTER WITH an on-chip track-and-hold circuit. Optimized for LOW cost, LOW POWER, small size and ease of use, this product operates at conversion rates up TO 230 MSPS while consuming just 1.05 mW per MHz of clock frequency, or 210 mW at 200 MSPS. Raising the PD pin puts the ADC08200 inTO a POWER Down mode where it consumes about 1 mW.
The unique architecture achieves 7.3 Effective Bits WITH 50 MHz input frequency. The ADC08200 is resistant TO latch up and the outputs are short-circuit proof. The TOp and botTOm of the ADC08200s reference ladder are available for connections, enabling a wide range of input possibilities. The digital outputs are TTL/CMOS compatible WITH a separate output POWER supply pin TO support interfacing WITH 3V or 2.5V logic. The digital inputs (CLK and PD) are TTL/CMOS compatible. The output data format is straight binary. The ADC08200 is offered in a 24-lead plastic package
(TSSOP) and, while specified over the industrial temperature range of −40°C TO +85°C, it will function over the TO −40°C TO +105°C temperature range. An evaluation board is available TO assist in the easy evaluation of the ADC08200.

Features
■ Single-ended input
INTERNAL sample-and-hold function
LOW voltage (single +3V) operation
■ Small package
POWER-down feature

Key Specifications
■ Resolution 8 Bits
■ Maximum sampling frequency 200 MSPS (min)
■ DNL ±0.4 LSB (typ)
■ ENOB (fIN= 50 MHz) 7.3 bits (typ)
■ THD (fIN= 50 MHz) 61 dB (typ)
POWER Consumption
   — Operating 1.05 mW/MSPS (typ)
   — POWER Down 1 mW (typ)

Applications
■ Flat panel displays
■ Projection systems
■ Set-TOp boxes
■ Battery-POWERed instruments
■ Communications
■ Medical imaging
■ Astronomy

Part Name(s) : ADC08200_06 ADC08200CIMT_06 ADC08200CIMTX_06 ADC08200EVAL_06 National-Semiconductor
National ->Texas Instruments
Description : 8-BIT, 20 MSPS TO 200 MSPS, 1.05 mW/MSPS A/D CONVERTER WITH INTERNAL Sample-and-Hold View

General Description
The ADC08200 is a LOW-POWER, 8-BIT, monolithic analog-TO-digital CONVERTER WITH an on-chip track-and-hold circuit. Optimized for LOW cost, LOW POWER, small size and ease of use, this product operates at conversion rates up TO 230 MSPS while consuming just 1.05 mW per MHz of clock frequency, or 210 mW at 200 MSPS. Raising the PD pin puts the ADC08200 inTO a POWER Down mode where it consumes about 1 mW.
The unique architecture achieves 7.3 Effective Bits WITH 50 MHz input frequency. The ADC08200 is resistant TO latch-up and the outputs are short-circuit proof. The TOp and botTOm of the ADC08200’s reference ladder are available for connections, enabling a wide range of input possibilities. The digital outputs are TTL/CMOS compatible WITH a separate output POWER supply pin TO support interfacing WITH 3V or 2.5V logic. The digital inputs (CLK and PD) are TTL/CMOS compatible. The output data format is straight binary.
The ADC08200 is offered in a 24-lead plastic package (TSSOP) and, while specified over the industrial temperature range of −40˚C TO +85˚C, it will function over the TO −40˚C TO +105˚C temperature range. An evaluation board is available TO assist in the easy evaluation of the ADC08200.

Features
■ Single-ended input
INTERNAL sample-and-hold function
LOW voltage (single +3V) operation
■ Small package
POWER-down feature

Key Specifications
■ Resolution 8 Bits
■ Maximum sampling frequency 200 MSPS (min)
■ DNL ±0.4 LSB (typ)
■ ENOB (fIN= 50 MHz) 7.3 bits (typ)
■ THD (fIN= 50 MHz) 61 dB (typ)
POWER Consumption
   — Operating 1.05 mW/MSPS (typ)
   — POWER Down 1 mW (typ)

Applications
■ Flat panel displays
■ Projection systems
■ Set-TOp boxes
■ Battery-POWERed instruments
■ Communications
■ Medical imaging
■ Astronomy

Part Name(s) : ADC08200 ADC08200CIMTX ADC08200CIMT ADC08200CIMT/NOPB ADC08200CIMTX/NOPB TI
Texas Instruments
Description : 8-BIT, 20 MSPS TO 200 MSPS, LOW POWER A/D CONVERTER WITH INTERNAL Sample and-Hold View

DESCRIPTION
The ADC08200 is a LOW-POWER, 8-BIT, monolithic analog-TO-digital CONVERTER WITH an on-chip track-and-hold circuit. Optimized for LOW cost, LOW POWER, small size and ease of use, this product operates at conversion rates up TO 230 MSPS while consuming just 1.05 mW per MHz of clock frequency, or 210 mW at 200 MSPS. Raising the PD pin puts the ADC08200 inTO a POWER Down mode where it consumes about 1 mW.
The unique architecture achieves 7.3 Effective Bits WITH 50 MHz input frequency. The ADC08200 is resistant TO latch-up and the outputs are short-circuit proof. The TOp and botTOm of the ADC08200s reference ladder are available for connections, enabling a wide range of input possibilities. The digital outputs are TTL/CMOS compatible WITH a separate output POWER supply pin TO support interfacing WITH 3V or 2.5V logic. The digital inputs (CLK and PD) are TTL/CMOS compatible. The output data format is straight binary.
The ADC08200 is offered in a 24-lead TSSOP package and, while specified over the industrial temperature range of −40°C TO +85°C, it will function over the TO −40°C TO +105°C temperature range.

FEATURES
• Single-Ended Input
INTERNAL Sample-and-Hold Function
LOW Voltage (Single +3V) Operation
• Small Package
POWER-Down Feature

KEY SPECIFICATIONS
• Resolution 8 Bits
• Maximum sampling frequency 200 MSPS (min)
• DNL ±0.4 LSB (typ)
• ENOB (fIN = 50 MHz) 7.3 bits (typ)
• THD (fIN = 50 MHz) 61 dB (typ)
POWER Consumption
   – Operating 1.05 mW/MSPS (typ)
   – POWER Down 1 mW (typ)

APPLICATIONS
• Flat Panel Displays
• Projection Systems
• Set-TOp Boxes
• Battery-POWERed Instruments
• Communications
• Medical Imaging
• Astronomy

Part Name(s) : ADC08060 ADC08060CIMT ADC08060CIMTX ADC08060 ADC08060CIMT ADC08060CIMTX ADC08060EVAL National-Semiconductor
National ->Texas Instruments
Description : 8-BIT, 20 MSPS TO 60 MSPS, 1.3 mW/MSPS A/D CONVERTER WITH INTERNAL Sample-and-Hold View

General Description
The ADC08060 is a LOW-POWER, 8-BIT, monolithic analog-TO-digital CONVERTER WITH an on-chip track-and-hold circuit. Optimized for LOW cost, LOW POWER, small size and ease of use, this product operates at conversion rates of 20 MSPS TO 70 MSPS WITH outstanding dynamic performance over its full operating range while consuming just 1.3 mW per MHz of clock frequency. That’s just 78 mW of POWER at 60 MSPS. Raising the PD pin puts the ADC08060 inTO a POWER Down mode where it consumes just 1 mW.

Features
■ Single-ended input
INTERNAL sample-and-hold function
LOW voltage (single +3V) operation
■ Small package
POWER-down feature

Applications
■ Digital imaging systems
■ Communication systems
■ Portable instrumentation
■ Viterbi decoders
■ Set-TOp boxes


Part Name(s) : ADC12020 ADC12020CIVY ADC12020CIVYX ADC12020EVAL National-Semiconductor
National ->Texas Instruments
Description : 12-Bit, 20 MSPS, 185 mW A/D CONVERTER WITH INTERNAL Sample-and-Hold View

General Description
The ADC12020 is a monolithic CMOS analog-TO-digital CONVERTER capable of converting analog input signals inTO 12-bit digital words at 20 Megasamples per second (MSPS), minimum. This CONVERTER uses a differential, pipeline architecture WITH digital error correction and an on-chip sample-and-hold circuit TO minimize die size and POWER consumption while providing excellent dynamic performance. Operating on a single 5V POWER supply, this device consumes just 185 mW at 20 MSPS, including the reference current. The POWER Down feature reduces POWER consumption TO 40 mW.

Features
INTERNAL sample-and-hold
■ Outputs 2.5V TO 5V compatible
■ TTL/CMOS compatible input/outputs
POWER down mode
■ On-chip reference buffer

Applications
■ Image Processing Front End
■ Instrumentation
■ PC-Based Data Acquisition
■ Fax Machines
■ Waveform Digitizers
■ Sonar/Radar
■ DSP Front Ends

Part Name(s) : ADC08100MDC ADC08100MWC ADC08100CIMT ADC08100CIMTX National-Semiconductor
National ->Texas Instruments
Description : 8-BIT, 20 MSPS TO 100 MSPS, 1.3 mW/MSPS A/D CONVERTER View

General Description
The ADC08100 is a LOW-POWER, 8-BIT, monolithic analog-TOdigital CONVERTER WITH an on-chip track-and-hold circuit. Optimized for LOW cost, LOW POWER, small size and ease of use, this product operates at conversion rates of 20 MSPS TO 100 MSPS WITH outstanding dynamic performance over its full operating range while consuming just 1.3 mW per MHz of clock frequency. That’s just 130 mW of POWER at 100 MSPS. Raising the PD pin puts the ADC08100 inTO a POWER Down mode where it consumes just 1 mW.
   
Features
■ Single-ended input
INTERNAL sample-and-hold function
LOW voltage (single +3V) operation
■ Small package
POWER-down feature
   
Applications
■ Flat panel displays
■ Projection systems
■ Set-TOp boxes
■ Battery-POWERed instruments
■ Communications
■ Medical scan CONVERTERs
■ X-ray imaging
■ High speed Viterbi decoders
■ Astronomy
   

Part Name(s) : ADC08100 ADC08100CIMTC ADC08100CIMTCX ADC08100EVAL National-Semiconductor
National ->Texas Instruments
Description : 8-BIT, 20 MSPS TO 100 MSPS, 1.3 mW/MSPS A/D CONVERTER View

General Description
The ADC08100 is a LOW-POWER, 8-BIT, monolithic analog-TOdigital CONVERTER WITH an on-chip track-and-hold circuit. Optimized for LOW cost, LOW POWER, small size and ease of use, this product operates at conversion rates of 20 MSPS TO 100 MSPS WITH outstanding dynamic performance over its full operating range while consuming just 1.3 mW per MHz of clock frequency. Thats just 130 mW of POWER at 100 MSPS. Raising the PD pin puts the ADC08100 inTO a POWER Down mode where it consumes just 1 mW.
   
Features
■ Single-ended input
INTERNAL sample-and-hold function
LOW voltage (single +3V) operation
■ Small package
POWER-down feature
   
Applications
■ Flat panel displays
■ Projection systems
■ Set-TOp boxes
■ Battery-POWERed instruments
■ Communications
■ Medical scan CONVERTERs
■ X-ray imaging
■ High speed Viterbi decoders
■ Astronomy
   

Part Name(s) : ADC08L060 ADC08L060CIMT/NOPB ADC08L060CIMTX/NOPB ADC08L060CIMT Texas-Instruments
Texas Instruments
Description : 8-BIT, 10 MSPS TO 60 MSPS, 0.65 mW/MSPS A/D CONVERTER WITH INTERNAL Sample-and-Hold View

DESCRIPTION
The ADC08L060 is a LOW-POWER, 8-BIT, monolithic analog-TO-digital CONVERTER WITH an on-chip track-and- hold circuit. Optimized for LOW cost, LOW POWER, small size and ease of use, this product operates at conversion rates of 10 MSPS TO 60 MSPS while consuming just 0.65 mW per MHz of clock frequency, or 39 mW at 60 MSPS. Raising the PD pin puts the ADC08L060 inTO a POWER Down mode where it consumes about 1 mW.

FEATURES
• Single-ended input
INTERNAL sample-and-hold function
LOW voltage (single +3V) operation
• Small package
POWER-down feature

APPLICATIONS
• Digital Imaging
• Set-TOp boxes
• Portable Instrumentation
• Communication Systems
• X-ray imaging
• Viterbi decoders

Part Name(s) : ADC08L060 ADC08L060CIMT ADC08L060CIMT/NOPB ADC08L060CIMTX/NOPB TI
Texas Instruments
Description : 8-BIT, 10 MSPS TO 60 MSPS, 0.65 mW/MSPS A/D CONVERTER WITH INTERNAL Sample-and-Hold View

DESCRIPTION
The ADC08L060 is a LOW-POWER, 8-BIT, monolithic analog-TO-digital CONVERTER WITH an on-chip track-and- hold circuit. Optimized for LOW cost, LOW POWER, small size and ease of use, this product operates at conversion rates of 10 MSPS TO 60 MSPS while consuming just 0.65 mW per MHz of clock frequency, or 39 mW at 60 MSPS. Raising the PD pin puts the ADC08L060 inTO a POWER Down mode where it consumes about 1 mW.

FEATURES
• Single-ended input
INTERNAL sample-and-hold function
LOW voltage (single +3V) operation
• Small package
POWER-down feature

APPLICATIONS
• Digital Imaging
• Set-TOp boxes
• Portable Instrumentation
• Communication Systems
• X-ray imaging
• Viterbi decoders

1

2345678910 Next

All Rights Reserved © datasheetbank.com 2014 - 2019 [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]