datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

P/N + Description + Content Search

Search Word's :
Description : 12-Bit, 20 Msps/40 Msps/65 Msps 3 V Low Power A/D Converter

GENERAL DESCRIPTION
The AD9237 is a family of monolithic, single 3 V supply, 12-bit, 20 Msps/40 Msps/65 Msps analog-to-digital Converters (ADC). This family features a high performance sample-and-hold amplifier (SHA) and voltage reference. The AD9237 uses a multistage differential pipelined architecture with output error correction logic to provide 12-bit accuracy at 20 Msps/ 40 Msps/65 Msps data rates and guarantees no missing codes over the full operating temperature range.

FEATURES
    UltraLow Power 85 mW at 20 Msps 135 mW at 40 Msps 190 mW at 65 Msps
    SNR = 66 dBc to Nyquist at 65 Msps
    SFDR = 80 dBc to Nyquist at 65 Msps
    DNL = ±0.7 LSB
    Differential input with 500 MHz bandwidth
    Flexible analog input: 1 V p-p to 4 V p-p range
    Offset binary, twos complement, or gray code data formats
    Output enable pin
    2-step Power-down
    Full Power-down and sleep mode
    Clock duty cycle stabilizer

APPLICATIONS
    Ultrasound and medical imaging
    Battery-Powered instruments
    Hand-held scope meters
    Low cost digital oscilloscopes
    Low Power digital still cameras and copiers
    Low Power communications

Description : 10-Bit, 20 Msps/40 Msps/65 Msps/80 Msps, 1.8 V Analog-to-Digital Converter

GENERAL DESCRIPTION
The AD9609 is a monolithic, single channel 1.8 V supply, 10-bit, 20 Msps/40 Msps/65 Msps/80 Msps analog-to-digital Converter (ADC). It features a high performance sample-and hold circuit and on-chip voltage reference.

FEATURES
1.8 V analog supply operation
1.8 V to 3.3 V output supply
SNR
  61.5 dBFS at 9.7 MHz input
  61.0 dBFS at 200 MHz input
SFDR
  75 dBc at 9.7 MHz input
  73 dBc at 200 MHz input
Low Power
  45 mW at 20 Msps
  76 mW at 80 Msps
Differential input with 700 MHz bandwidth
On-chip voltage reference and sample-and-hold circuit
2 V p-p differential analog input
DNL = ±0.10 LSB
Serial port control options
  Offset binary, gray code, or twos complement data format
  Optional clock duty cycle stabilizer
  Integer 1-to-8 input clock divider
  Built-in selectable digital test pattern generation
  Energy-saving Power-down modes
  Data clock out with programmable clock and data alignment

APPLICATIONS
Communications
Diversity radio systems
Multimode digital receivers
  GSM, EDGE, W-CDMA, LTE, CDMA2000, WiMAX, TD-SCDMA
Smart antenna systems
Battery-Powered instruments
Handheld scope meters
Portable medical imaging
Ultrasound
Radar/LIDAR
PET/SPECT imaging

Description : 14-Bit, 20 Msps/40 Msps/65 Msps/80 Msps, 3 V A/D Converter

GENERAL DESCRIPTION
The AD9245 is a monolithic, single 3 V supply, 14-bit, 20 Msps/40 Msps/65 Msps/80 Msps analog-to-digital Converter (ADC) featuring a high performance sample-andhold amplifier (SHA) and voltage reference. The AD9245 uses a multistage differential pipelined architecture with output error correction logic to provide 14-bit accuracy and guarantee no missing codes over the full operating temperature range.

FEATURES
   Single 3 V supply operation (2.7 V to 3.6 V)
   SNR = 72.7 dBc to Nyquist
   SFDR = 83.0 dBc to Nyquist
   Low Power
      366 mW at 80 Msps
      300 mW at 65 Msps
      165 mW at 40 Msps
      90 mW at 20 Msps
   Differential input with 500 MHz bandwidth
   On-chip reference and sample-and-hold
   DNL = ±0.5 LSB
   Flexible analog input: 1 V p-p to 2 V p-p range
   Offset binary or twos complement data format
   Clock duty-cycle stabilizer
  
APPLICATIONS
   Medical imaging equipment
   IF sampling in communications receivers
      WCDMA, CDMA-One, CDMA-2000, and TDS-CDMA
   Battery-Powered instruments
   Hand-held scopemeters
   Spectrum analyzers
   Power-sensitive military applications

Part Name(s) : AD6644PCB AD6644ST
ADI
Analog Devices
Description : 14-Bit, 40 Msps/65 Msps A/D Converter

PRODUCT DESCRIPTION
The AD6644 is a high-speed, high-performance, monolithic 14-bit analog-to-digital Converter. All necessary functions, including track-and-hold (T/H) and reference, are included onchip to provide a complete conversion solution. The AD6644 provides CMOS-compatible digital outputs. It is the third generation in a wideband ADC family, preceded by the AD9042 (12-bit 41 Msps) and the AD6640 (12-bit 65 Msps, IF sampling.)

FEATURES
   65 Msps Guaranteed Sample Rate
   40 Msps Version Available
   Sampling Jitter < 300 fs
   100 dB Multitone SFDR
   1.3 W Power Dissipation
   Differential Analog Inputs
   Digital Outputs
      Two’s Complement Format
      3.3 V CMOS-Compatible
      Data Ready for Output Latching

APPLICATIONS
   Multichannel, Multimode Receivers
   AMPS, IS-136, CDMA, GSM, Third Generation
   Single Channel Digital Receivers
   Antenna Array Processing
   Communications Instrumentation
   Radar, Infrared Imaging
   Instrumentation

Description : 10-Bit, 200 Msps/250 Msps/300 Msps, 1.8 V Analog-to-Digital Converter

GENERAL DESCRIPTION
The AD9211 is a 10-bit monolithic sampling analog-to-digital Converter optimized for high performance, Low Power, and ease of use. The product operates at up to a 300 Msps conversion rate and is optimized for outstanding dynamic performance in wideband carrier and broadband systems. All necessary functions, including a track-and-hold (T/H) and voltage reference, are included on the chip to provide a complete
signal conversion solution.

FEATURES
SNR = 60.1 dBFS @ fIN up to 70 MHz @ 300 Msps
ENOB of 9.7 @ fIN up to 70 MHz @ 300 Msps (−1.0 dBFS)
SFDR = −80 dBc @ fIN up to 70 MHz @ 300 Msps (−1.0 dBFS)
Excellent linearity
  DNL = ±0.1 LSB typical
  INL = ±0.2 LSB typical
LVDS at 300 Msps (ANSI-644 levels)
700 MHz full Power analog bandwidth
On-chip reference, no external decoupling required
Integrated input buffer and track-and-hold
Low Power dissipation
  437 mW @ 300 Msps—LVDS SDR mode
  410 mW @ 300 Msps—LVDS DDR mode
Programmable input voltage range 1.0 V to 1.5 V, 1.25 V nominal
1.8 V analog and digital supply operation
Selectable output data format (offset binary, twos complement, Gray code)
Clock duty cycle stabilizer
Integrated data capture clock

APPLICATIONS
Wireless and wired broadband communications
Cable reverse path
Communications test equipment
Radar and satellite subsystems
Power amplifier linearization

CADEKA
Cadeka Microcircuits LLC.
Description : 10-BIT, 20 Msps, ECL OUTPUT A/D Converter

GENERAL DESCRIPTION
The SPT7810 A/D Converter is a 10-bit monolithic Converter capable of word rates of a minimum of 20 Msps. On board track/hold function assures excellent dynamic performance without the need for external components. Drive requirement problems are minimized with an input capacitance of only 5 pF.

FEATURES
• Monolithic 20 Msps Converter
• On-Chip Track/Hold
• Bipolar ±2.0 V Analog Input
• 60 dB SNR @ 1 MHz Input
Low Power (1.3 W Typical)
• 5 pF input Capacitance
• ECL Outputs

APPLICATIONS
• Medical Imaging
• Professional Video
• Radar Receivers
• Instrumentation
• Electronic Warfare
• Digital Communications

SPT
Signal Processing Technologies
Description : 12-BIT, 20 Msps, TTL, A/D Converter

GENERAL DESCRIPTION
The SPT7921 A/D Converter is the industrys first 12-bit monolithic analog-to-digital Converter capable of sample rates greater than 20 Msps. On board input buffer and track/hold function assures excellent dynamic performance without the need for external components. Drive requirement problems are minimized with an input capacitance of only 5 pF.

FEATURES
• Monolithic
• 12-Bit 20 Msps Converter
• 66 dB SNR @1 MHz Input
• On-Chip Track/Hold
• Bipolar ±2.0 V Analog Input
Low Power (1.1 W Typical)
• 5 pF Input Capacitance
• TTL Outputs

APPLICATIONS
• Radar Receivers
• Professional Video
• Instrumentation
• Medical Imaging
• Electronic Warfare
• Digital Communications
• Digital Spectrum Analyzers
• Electro-Optics

CADEKA
Cadeka Microcircuits LLC.
Description : 12-BIT, 20 Msps, TTL, A/D Converter

GENERAL DESCRIPTION
The SPT7921 A/D Converter is the industrys first 12-bit monolithic analog-to-digital Converter capable of sample rates greater than 20 Msps. On board input buffer and track/hold function assures excellent dynamic performance without the need for external components. Drive requirement problems are minimized with an input capacitance of only 5 pF.

FEATURES
• Monolithic
• 12-Bit 20 Msps Converter
• 66 dB SNR @1 MHz Input
• On-Chip Track/Hold
• Bipolar ±2.0 V Analog Input
Low Power (1.1 W Typical)
• 5 pF Input Capacitance
• TTL Outputs

APPLICATIONS
• Radar Receivers
• Professional Video
• Instrumentation
• Medical Imaging
• Electronic Warfare
• Digital Communications
• Digital Spectrum Analyzers
• Electro-Optics

Description : 10-Bit, 20 Msps/40 Msps/65 Msps/80 Msps, 1.8 V Dual Analog-to-Digital Converter

GENERAL DESCRIPTION
The AD9204 is a monolithic, dual-channel, 1.8 V supply, 10-bit, 20 Msps/40 Msps/65 Msps/80 Msps analog-to-digital Converter (ADC). It features a high performance sample-and-hold circuit and on-chip voltage reference.

FEATURES
    1.8 V analog supply operation
    1.8 V to 3.3 V output supply
    SNR
        61.3 dBFS at 9.7 MHz input
        61.0 dBFS at 200 MHz input
    SFDR
        75 dBc at 9.7 MHz input
        73 dBc at 200 MHz input
    Low Power
        30 mW per channel at 20 Msps
        63 mW per channel at 80 Msps
    Differential input with 700 MHz bandwidth
    On-chip voltage reference and sample-and-hold circuit
    DNL = ±0.11 LSB
    Serial port control options
        Scalable analog input: 1 V p-p to 2 V p-p differential
        Offset binary, gray code, or twos complement data format
        Optional clock duty cycle stabilizer
        Integer 1-to-8 input clock divider
        Built-in selectable digital test pattern generation
        Energy-saving Power-down modes
        Data clock out with programmable clock and data alignment

APPLICATIONS
    Communications
    Diversity radio systems
    Multimode digital receivers GSM, EDGE, W-CDMA, LTE, CDMA2000, WiMAX, TD-SCDMA
    I/Q demodulation systems
    Smart antenna systems
    Battery-Powered instruments
    Handheld scope meters
    Ultrasound
    Radar/LIDAR
    PET/SPECT imaging

ADI
Analog Devices
Description : 11-Bit, 200 Msps, 1.8 V Analog-to-Digital Converter

GENERAL DESCRIPTION
The AD9230-11 is an 11-bit monolithic sampling analog-to-digital Converter (ADC) optimized for high performance, Low Power, and ease of use. The product operates at up to a 200 Msps conversion rate and is optimized for outstanding dynamic performance in wideband carrier and broadband systems. All necessary functions, including a track-and-hold (T/H) amplifier and voltage reference, are included on the chip to provide a complete signal conversion solution.

FEATURES
   SNR = 62.5 dBFS @ fIN up to 70 MHz @ 200 Msps
   ENOB of 10.2 @ fIN up to 70 MHz @ 200 Msps (−1.0 dBFS)
   SFDR = −77 dBc @ fIN up to 70 MHz @ 200 Msps (−1.0 dBFS)
   Excellent linearity
      DNL = ±0.15 LSB typical
      INL = ±0.5 LSB typical
   LVDS at 200 Msps (ANSI-644 levels)
   700 MHz full Power analog bandwidth
   On-chip reference, no external decoupling required
   Integrated input buffer and track-and-hold amplifier
   Low Power dissipation
      373 mW @ 200 Msps (LVDS SDR mode)
      328 mW @ 200 Msps (LVDS DDR mode)
   Programmable input voltage range
      1.0 V to 1.5 V, 1.25 V nominal
   1.8 V analog and digital supply operation
   Selectable output data format (offset binary, twos
      complement, gray code)
   Clock duty cycle stabilizer
   Integrated data capture clock
  
APPLICATIONS
   Wireless and wired broadband communications
   Cable reverse path
   Communications test equipment
   Radar and satellite subsystems
   Power amplifier linearization

12345678910 Next

All Rights Reserved© datasheetbank.com  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]