datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

P/N + Description + Content Search

Search Word's :
Part Name(s) : LC66354S
SANYO
SANYO -> Panasonic
Description : Four-Bit Single-Chip Microcontrollers with 4, 6, and 8 KB of On-Chip ROM

Overview
The LC662104A, LC662106A, and LC662108A are 4-bit CMOS Microcontrollers that integrate on a single chip all the functions required in a special-purpose telephone controller, including ROM, RAM, I/O ports, a serial interface, a DTMF generator, timers, and interrupt functions. These Microcontrollers are available in a 30-pin package.

SANYO
SANYO -> Panasonic
Description : Four-Bit Single-Chip Microcontrollers with 6 k and 8 k Bytes of On-Chip ROM

Overview
The LC66556B and LC66558B are four-bit Single-Chip CMOS Microcontrollers that integrate on a single chip all the functions required in a microcontroller, including ROM, RAM, I/O ports, two serial interfaces, comparator inputs, three-value inputs, timers and interrupts. These products are provided in a 64-pin package.
These products differ from the earlier LC66558A Series in the power supply voltage range and certain other electrical characteristics.

Features and Functions
• On-chip ROM and RAM with 6 k (or 8 k) byte and 512 × 4-bit capacities
• The same instruction set (with 127 instructions) as the LC66000 Series (except that the SB instruction is not supported)
• I/O ports: 54 pins
8-Bit serial interface: two circuits (16-bit cascade connection supported)
• Instruction cycle: 0.92 to 10 µs (at 3 to 5.5 V)
• Powerful timers and prescalers 12-bit timer: time-limit timer, event counter, pulse width measurement, square wave output 8-Bit timer: time-limit timer, event counter, PWM output, square wave output 12-bit prescaler: time base functions
• Powerful 11-factor 8-vector interrupt system External interrupts: 6 factors/3 vectors Internal interrupts: 5 factors/5 vectors
• Flexible I/O functions Comparator inputs, three-value inputs, 20 mA drive outputs, 15 V breakdown voltage pins, pull-up/opendrain option switching possible
• Runaway detection function (watchdog timer) option
8-Bit I/O function
• Power saving functions: halt and hold modes Package: DIP64S, QFP64E
• Evaluation LSI: LC66599 (evaluation chip) + EVA850/800-TB665XX LC66E516 (On-chip EPROM Microcontrollers) LC66P516 (On-chip OTPROM Microcontrollers)

SANYO
SANYO -> Panasonic
Description : Four-Bit Single-Chip Microcontrollers with 8, 12, and 16 KB of On-Chip ROM

Overview
The LC662516A, LC662512A, and LC662508A are 4-bit CMOS Microcontrollers that integrate on a single chip all the functions required in a special-purpose telephone controller, including ROM, RAM, I/O ports, a serial interface, a DTMF generator, timers, and interrupt functions. These Microcontrollers are available in a 64-pin package.

Features and Functions
• On-chip ROM capacities of 8, 12, and 16 kilobytes, and an on-chip RAM capacity of 512 × 4 bits.
• Fully supports the LC66000 Series common instruction set (128 instructions).
• I/O ports: 58 pins
• DTMF generator
    This microcontroller incorporates a circuit that can generate two sine wave outputs, DTMF output, or a melody output for software applications.
8-Bit serial interface: Two-wire interface (16-bit data length. Supports cascade connection.)
• Instruction cycle time: 0.95 to 10 µs (at 3.0 to 5.5 V)
• Powerful timer functions and prescalers
    — Time limit timer, event counter, pulse width measurement, and square wave output using a 12-bit timer.
    — Time limit timer, event counter, PWM output, and square wave output using an 8-Bit timer.
    — Time base function using a 12-bit prescaler.
• Powerful interrupt system with 11 interrupt factors and 8 interrupt vector locations.
    — External interrupts: 3 factors/3 vector locations
    — Internal interrupts: 8 factors/5 vector locations (Waveform output internal interrupts: 3 factors and 1 vector; shared with external expansion interrupts)
• Flexible I/O functions
    Selectable options include 20mA drive outputs, inverter circuits, pull-up and open drain circuits.
• Optional runaway detection function (watchdog timer)
8-Bit I/O functions
• Power saving functions using halt and hold modes.
• Packages: DIP64S, QIP64E (QFP64E)
• Evaluation ICs: LC665099 (evaluation chip) + EVA86K-ECB662500 LC66E2516(on-chip EPROM microcontroller)

SANYO
SANYO -> Panasonic
Description : Four-Bit Single-Chip Microcontrollers with 4, 6, and 8 KB of On-Chip ROM

Overview
The LC66354C, LC66356C, and LC66358C are 4-bit CMOS Microcontrollers that integrate on a single chip all the functions required in a system controller, including ROM, RAM, I/O ports, a serial interface, comparator inputs, three-value inputs, timers, and interrupt functions. These three Microcontrollers are available in a 42-pin package.

Features and Functions
• On-chip ROM capacities of 4, 6, and 8 kilobytes, and an on-chip RAM capacity of 512 × 4 bits.
• Fully supports the LC66000 Series common instruction set (128 instructions).
• I/O ports: 36 pins
8-Bit serial interface: two circuits (can be connected in cascade to form a 16-bit interface)
• Instruction cycle time: 0.92 to 10 µs (at 2.5 to 5.5 V)
    — For the earlier LC66358A Series: 1.96 to 10 µs (at 3.0 to 5.5 V) and 3.92 to 10 µs (at 2.2 to 5.5 V)
    — For the earlier LC66358B Series: 0.92 to 10 µs (at 3.0 to 5.5 V)
• Powerful timer functions and prescalers
    — Time limit timer, event counter, pulse width measurement, and square wave output using a 12-bit timer.
    — Time limit timer, event counter, PWM output, and square wave output using an 8-Bit timer.
    — Time base function using a 12-bit prescaler.
• Powerful interrupt system with 8 interrupt factors and 8 interrupt vector locations.
    — External interrupts: 3 factors/3 vector locations
    — Internal interrupts: 5 factors/5 vector locations
• Flexible I/O functions Comparator inputs, three-value inputs, 20-mA drive outputs, 15-V high-voltage pins, and pull-up/open-drain options.
• Optional runaway detection function (watchdog timer)
8-Bit I/O functions
• Power saving functions using halt and hold modes.
• Packages: DIP42S, QIP48E (QFP48E)
• Evaluation LSIs
    — LC66599 (evaluation chip) + EVA85/800-TB6630X
    — LC66E308 (on-chip EPROM microcontroller) used together.

SANYO
SANYO -> Panasonic
Description : 8-Bit Single-Chip Microcontroller

Overview
The LC865032A/28A/24A Microcontrollers are 8-Bit Single-Chip Microcontrollers with the following on-chip functional blocks :

• CPU : Operable at a minimum bus cycle time of 0.5 µs (microsecond)
• On-chip ROM capacity : Up to 32K bytes
• On-chip RAM capacity : 512 bytes (LC865032A/28A/24A)
• 16-bit timer/counter (or two 8-Bit timers)
• 16-bit timer/PWM (or two 8-Bit timers)
• 8-channel × 8-Bit A/D converter
• Two 8-Bit synchronous serial-interface circuits
• 13-source 10-vectored interrupt system All of the functions above are fabricated on a single chip.

SANYO
SANYO -> Panasonic
Description : Four-Bit Single-Chip Microcontrollers with 4, 6, and 8 KB of On-Chip ROM

Overview
The LC662104A, LC662106A, and LC662108A are 4-bit CMOS Microcontrollers that integrate on a single chip all the functions required in a special-purpose telephone controller, including ROM, RAM, I/O ports, a serial interface, a DTMF generator, timers, and interrupt functions. These Microcontrollers are available in a 30-pin package.

Features and Functions
• On-chip ROM capacities of 4, 6, and 8 kilobytes, and an on-chip RAM capacity of 384 × 4 bits.
• Fully supports the LC66000 Series common instruction set (128 instructions). (The special-purpose instructions for TM1 and SI/01 are disabled.)
• I/O ports: 24 pins
• DTMF generator This microcontroller incorporates a circuit that can generate two sine wave outputs, DTMF output.
8-Bit serial interface: one circuit
• Instruction cycle time: 0.95 to 10 µs (at 3.0 to 5.5 V)
• Powerful timer functions and prescalers
    — Time limit timer, event counter, pulse width measurement, and square wave output using a 12-bit timer.
    — Time base function using a 12-bit prescaler.
• Powerful interrupt system with 6 interrupt factors and 6 interrupt vector locations.
    — External interrupts: 3 factors/3 vector locations
    — Internal interrupts: 3 factors/3 vector locations
• Flexible I/O functions Selectable options include 20-mA drive outputs, pull-up and open drain circuits.
• Optional runaway detection function (watchdog timer)
8-Bit I/O functions
• Power saving functions using halt and hold modes.
• Packages: DIP30SD, MFP30S
• Evaluation ICs: LC665099 (evaluation chip) + EVA86K
    - ECB662500 LC66E2108(on-chip EPROM microcontroller)

SANYO
SANYO -> Panasonic
Description : Four-Bit Single-Chip Microcontrollers with 4, 6, 8, 12, and 16 KB of On-Chip ROM

Overview
The LC665304A, LC665306A, LC665308A, LC665312A, and LC665316A are 4-bit CMOS Microcontrollers that integrate on a single chip all the functions required in a system controller, including ROM, RAM, I/O ports, a serial interface, 16-value comparator inputs, timers, interrupt functions, and an optional sub-oscillator circuit. These Microcontrollers are available in a 48-pin package.

Features and Functions
• On-chip ROM capacitiy of 4, 6, 8, 12, and 16 kilobytes, and an on-chip RAM capacity of 512 × 4 bits.
• Fully supports the LC66000 Series common instruction set (128 instructions).
• I/O ports: 42 pins
• A sub-oscillator circuit can be used (option) This circuit allows power dissipation to be reduced by operating at lower speeds.
8-Bit serial interface: two circuits (can be connected in cascade to form a 16-bit interface)
• Instruction cycle time: 0.95 to 10 µs (at 3 to 5.5 V)
• Powerful timer functions and prescalers
    — Time limit timer, event counter, pulse width measurement, and square wave output using a 12-bit timer.
    — Time limit timer, event counter, PWM output, and square wave output using an 8-Bit timer.
    — Time base function using a 12-bit prescaler.
• Powerful interrupt system with 8 interrupt factors and 8 interrupt vector locations.
    — External interrupts: 3 factors/3 vector locations
    — Internal interrupts: 5 factors/5 vector locations
• Flexible I/O functions 16-value comparator inputs, 20-mA drive outputs, inverter circuits, pull-up and open-drain circuits selectable as options.
• Optional runaway detection function (watchdog timer)
8-Bit I/O functions
• Power saving functions using halt and hold modes.
• Packages: DIP48S, QIP48E (QFP48E)
• Evaluation LSIs: LC66599 (evaluation chip) + EVA800/850-TB662YXX2 LC66E5316(on-chip EPROM microcontroller)

SANYO
SANYO -> Panasonic
Description : 8-Bit Single-Chip Microcontroller

Overview
The LC865020B/16B/12B/08B Microcontrollers are 8-Bit Single-Chip Microcontrollers with the following on-chip functional blocks :

• CPU : Operable at a minimum bus cycle time of 0.5 µs (microsecond)
• On-chip ROM capacity : Up to 20K bytes
• On-chip RAM capacity : 384 bytes (LC865020B/16B/12B/08B)
• 16-bit timer/counter (or two 8-Bit timers)
• 16-bit timer/PWM (or two 8-Bit timers)
• 8-channel × 8-Bit A/D converter
• Two 8-Bit synchronous serial-interface circuits
• 13-source 10-vectored interrupt system All of the functions above are fabricated on a single chip.

SANYO
SANYO -> Panasonic
Description : 8-Bit Single Chip Microcontroller with 16/12/08K-Byte ROM and 640-Byte RAM On Chip

Overview
The LC868016A/12A/08A Microcontrollers are 8-Bit single chip Microcontrollers with the following on-chip functional blocks :
    - CPU : Operable at a minimum bus cycle time of 0.5µs (microseconds)
    - On-chip ROM maximum capacity : 16K bytes
    - On-chip RAM capacity : 640 bytes
    - Dot-matrix liquid crystal display (LCD) automatic display controller / driver
    - External memory
    - 16-bit timer / counter (or two 8-Bit timers)
    - 16-bit timer / PWM (or two 8-Bit timers)
    - Two 8-Bit synchronous serial-interface circuits
    - 13-source 9-vectored interrupt system
All of the above functions are fabricated on a single chip.

SANYO
SANYO -> Panasonic
Description : 8-Bit Single Chip Microcontroller with 16/12/08K-Byte ROM and 640-Byte RAM On Chip

Overview
The LC868116A/12A/08A Microcontrollers are 8-Bit single chip Microcontrollers with the following on-chip functional blocks :
    - CPU : Operable at a minimum bus cycle time of 0.5µs (microseconds)
    - On-chip ROM maximum capacity : 16K bytes
    - On-chip RAM capacity : 640 bytes
    - Dot-matrix liquid crystal display (LCD) automatic display controller / driver
    - External memory
    - 16-bit timer / counter (or two 8-Bit timers)
    - 16-bit timer / PWM (or two 8-Bit timers)
    - Two 8-Bit synchronous serial-interface circuits
    - 13-source 9-level vectored interrupt system
All of the above functions are fabricated on a single chip

12345678910 Next

All Rights Reserved© datasheetbank.com  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]