datasheetbank_Logo    Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site
Part Name  

P/N + Description + Content Search

Search Words :

Part Name(s) : TLC545 TLC545C TLC545CFN TLC545CN TLC545CNG4 TLC545I TLC545IFN TLC545IFNR TLC545IN TLC545ING4 TLC546 TLC546C TLC546CFN TLC546CN TLC546I TLC546IFN TLC546IFNR TLC546IN TI
Texas Instruments
Description : 8-BIT ANALOG-TO-DIGITAL CONVERTERS WITH SERIAL CONTROL AND 19 INPUTS

description
The TLC545 and TLC546 are CMOS analog-to-digital CONVERTERS built around an 8-BIT switched capacitor successive-approximation analog-to-digital converter.

8-BIT Resolution A/D Converter
Microprocessor Peripheral or Stand-Alone Operation
On-Chip 20-Channel Analog Multiplexer
Built-in Self-Test Mode
Software-Controllable Sample and Hold
Total Unadjusted Error...±0.5 LSB Max
Timing and Control Signals Compatible With 8-BIT TLC540 and 10-Bit TLC1540 A/D Converter Families
CMOS Technology

View
Part Name(s) : TLC3544 TLC3544CDW TLC3544CPW TLC3544CPWG4 TLC3544CPWR TLC3544CPWRG4 TLC3544IDW TLC3544IDWG4 TLC3544IPW TLC3544IPWG4 TLC3548 TLC3548CDW TLC3548CDWG4 TLC3548CDWR TLC3548CDWRG4 TLC3548CPW TLC3548CPWG4 TLC3548CPWR TLC3548CPWRG4 TLC3548IDW TLC3548IDWG4 TLC3548IDWR TLC3548IDWRG4 TLC3548IPW TLC3548IPWG4 TI
Texas Instruments
Description : 5-V ANALOG, 3-/5-V DIGITAL, 14-BIT, 200-KSPS, 4-/8-CHANNELS SERIAL ANALOG-TO-DIGITAL CONVERTERS WITH 0-5 V (PSEUDODIFFERENTIAL) INPUTS

description
The TLC3544 and TLC3548 are a family of 14-bit resolution high-performance, low-power, CMOS analog-to-digital CONVERTERS (ADC). All devices operate from a single 5-V analog power supply and 3-V to 5-V digital supply. The serial interface consists of four digital inputs [chip select (CS), frame sync (FS), serial input-output clock (SCLK), serial data input (SDI)], and a 3-state serial data output (SDO). CS(works as SS, slave select), SDI, SDO, and SCLK form an SPI interface. FS, SDI, SDO, and SCLK form a DSP interface.

14-Bit Resolution
Maximum Throughput 200 KSPS
Analog Input Range 0-V to Reference Voltage
Multiple Analog Inputs:
– 8 Channels for TLC3548
– 4 Channels for TLC3544
Pseudodifferential Analog Inputs
SPI/DSP-Compatible Serial Interfaces With SCLK up to 25 MHz
Single 5-V Analog Supply; 3-/5-V Digital Supply
Low Power:
– 4 mA (Internal Reference: 1.8 mA) for Normal Operation
– 20 µA in Autopower-Down
Built-In 4-V Reference, Conversion Clock and 8x FIFO
Hardware-Controlled and Programmable Sampling Period
Programmable Autochannel Sweep and Repeat
Hardware Default Configuration
NL: ±1 LSB Max
DNL: ±1 LSB Max
SINAD: 80.8 dB
THD: –95 dB

View
Part Name(s) : TLC7225CDWG4 TLC7225IDWG4 TLC7225IDWRG4 TI
Texas Instruments
Description : QUADRUPLE 8-BIT DIGITAL-TO-ANALOG CONVERTERS

description
The TLC7225 consists of four 8-BIT voltage-output DIGITAL-TO-ANALOG CONVERTERS (DACs), with output buffer amplifiers and interface logic with double register-buffering.
Separate on-chip latches are provided for each of the DACs. Data is transferred into one of these data latches through a common 8-BIT TTL/CMOS-compatible (5 V) input port. Control inputs A0 and A1 determine which DAC is loaded when WR goes low. Only the data held in the DAC registers determines the analog outputs of the CONVERTERS. The double register buffering allows simultaneous update of all four outputs under control of LDAC. All logic inputs are TTL- and CMOS-level compatible and the control logic is speed compatible with most 8-BIT microprocessors. Each DAC includes an output buffer amplifier capable of driving up to 5 mA of output current. The TLC7225 performance is specified for input reference voltages from 2 V to VDD – 4 V with dual supplies. The voltage-mode configuration of the DACs allow the TLC7225 to be operated from a single power-supply rail at a reference of 10 V.
The TLC7225 is fabricated in a LinBiCMOS process that has been specifically developed to allow high-speed digital logic circuits and precision analog circuits to be integrated on the same chip. The TLC7225 has a common 8-BIT data bus with individual DAC latches. This provides a versatile control architecture for simple interface to microprocessors. All latch-enable signals are level triggered.
Combining four DACs, four operational amplifiers, and interface logic into a small, 0.3-inch wide, 24-terminal SOIC allows significant reduction in board space requirements and offers increased reliability in systems using multiple CONVERTERS. The pinout optimizes board layout with all of the analog inputs and outputs at one end of the package and all of the digital inputs at the other.
The TLC7225C is characterized for operation from 0°C to 70°C. The TLC7225I is characterized for operation from –25°C to 85°C.

● Four 8-BIT D/A CONVERTERS With Individual
   References
● Direct Bipolar Operation Without an
   External Level-Shift Amplifier
● Microprocessor Compatible
● TTL/CMOS Compatible
● Single Supply Operation Possible
● Simultaneous Update Facility
● Binary Input Coding
 
applications
● Process Control
● Automatic Test Equipment
● Automatic Calibration of Large System
   Parameters e.g., Gain/Offset

View
Part Name(s) : TLC5602C TLC5602CDW TLC5602CDWG4 TLC5602CDWR TLC5602CDWRG4 TLC5602CN TLC5602M TLC5602MFK TLC5602MJ TLC5602MJB TI
Texas Instruments
Description : VIDEO 8-BIT DIGITAL-TO-ANALOG CONVERTERS

description
The TLC5602x devices are low-power, ultra-high-speed video, DIGITAL-TO-ANALOG CONVERTERS that use the LinEPIC 1-µm CMOS process. The TLC5602x converts digital signals to analog signals at a sampling rate of dc to 20 MHz. Because of high-speed operation, the TLC5602x devices are suitable for digital video applications such as digital television, video processing with a computer, and radar-signal processing.
The TLC5602C is characterized for operation from 0°C to 70°C. The TLC5602M is characterized over the full military temperature range of –55°C to 125°C.

8-BIT Resolution
● ±0.2% Linearity
● Maximum Conversion Rate 30 MHz Typ 20 MHz Min
● Analog Output Voltage Range VDD to VDD –1 V
● TTL Digital Input Voltage
● 5-V Single Power-Supply Operation
● Low Power Consumption . . . 80 mW Typ
● Interchangeable With Fujitsu MB40778

View
Part Name(s) : TLC7225C TLC7225I TLC7225CDW TLC7225CDWR TLC7225CDWRG4 TLC7225IDW TLC7225IDWR TI
Texas Instruments
Description : QUADRUPLE 8-BIT DIGITAL-TO-ANALOG CONVERTERS

description
The TLC7225 consists of four 8-BIT voltage-output DIGITAL-TO-ANALOG CONVERTERS (DACs), with output buffer amplifiers and interface logic with double register-buffering.
Separate on-chip latches are provided for each of the DACs. Data is transferred into one of these data latches through a common 8-BIT TTL/CMOS-compatible (5 V) input port. Control inputs A0 and A1 determine which DAC is loaded when WR goes low. Only the data held in the DAC registers determines the analog outputs of the CONVERTERS. The double register buffering allows simultaneous update of all four outputs under control of LDAC. All logic inputs are TTL- and CMOS-level compatible and the control logic is speed compatible with most 8-BIT microprocessors. Each DAC includes an output buffer amplifier capable of driving up to 5 mA of output current. The TLC7225 performance is specified for input reference voltages from 2 V to VDD – 4 V with dual supplies. The voltage-mode configuration of the DACs allow the TLC7225 to be operated from a single power-supply rail at a reference of 10 V.
The TLC7225 is fabricated in a LinBiCMOS process that has been specifically developed to allow high-speed digital logic circuits and precision analog circuits to be integrated on the same chip. The TLC7225 has a common 8-BIT data bus with individual DAC latches. This provides a versatile control architecture for simple interface to microprocessors. All latch-enable signals are level triggered.
Combining four DACs, four operational amplifiers, and interface logic into a small, 0.3-inch wide, 24-terminal SOIC allows significant reduction in board space requirements and offers increased reliability in systems using multiple CONVERTERS. The pinout optimizes board layout with all of the analog inputs and outputs at one end of the package and all of the digital inputs at the other.
The TLC7225C is characterized for operation from 0°C to 70°C. The TLC7225I is characterized for operation from –25°C to 85°C.

● Four 8-BIT D/A CONVERTERS With Individual
   References
● Direct Bipolar Operation Without an
   External Level-Shift Amplifier
● Microprocessor Compatible
● TTL/CMOS Compatible
● Single Supply Operation Possible
● Simultaneous Update Facility
● Binary Input Coding
 
applications
● Process Control
● Automatic Test Equipment
● Automatic Calibration of Large System
   Parameters e.g., Gain/Offset

View
Part Name(s) : TLC7225C TLC7225I TLC7225CDW TLC7225CDWG4 TLC7225CDWR TLC7225CDWRG4 TLC7225IDW TLC7225IDWG4 TLC7225IDWR TLC7225IDWRG4 Texas-Instruments
Texas Instruments
Description : QUADRUPLE 8-BIT DIGITAL-TO-ANALOG CONVERTERS

description
The TLC7225 consists of four 8-BIT voltage-output DIGITAL-TO-ANALOG CONVERTERS (DACs), with output buffer amplifiers and interface logic with double register-buffering.
Separate on-chip latches are provided for each of the DACs. Data is transferred into one of these data latches through a common 8-BIT TTL/CMOS-compatible (5 V) input port. Control inputs A0 and A1 determine which DAC is loaded when WR goes low. Only the data held in the DAC registers determines the analog outputs of the CONVERTERS. The double register buffering allows simultaneous update of all four outputs under control of LDAC. All logic inputs are TTL- and CMOS-level compatible and the control logic is speed compatible with most 8-BIT microprocessors. Each DAC includes an output buffer amplifier capable of driving up to 5 mA of output current. The TLC7225 performance is specified for input reference voltages from 2 V to VDD – 4 V with dual supplies. The voltage-mode configuration of the DACs allow the TLC7225 to be operated from a single power-supply rail at a reference of 10 V.
The TLC7225 is fabricated in a LinBiCMOS process that has been specifically developed to allow high-speed digital logic circuits and precision analog circuits to be integrated on the same chip. The TLC7225 has a common 8-BIT data bus with individual DAC latches. This provides a versatile control architecture for simple interface to microprocessors. All latch-enable signals are level triggered.
Combining four DACs, four operational amplifiers, and interface logic into a small, 0.3-inch wide, 24-terminal SOIC allows significant reduction in board space requirements and offers increased reliability in systems using multiple CONVERTERS. The pinout optimizes board layout with all of the analog inputs and outputs at one end of the package and all of the digital inputs at the other.
The TLC7225C is characterized for operation from 0°C to 70°C. The TLC7225I is characterized for operation from –25°C to 85°C.

● Four 8-BIT D/A CONVERTERS With Individual
   References
● Direct Bipolar Operation Without an
   External Level-Shift Amplifier
● Microprocessor Compatible
● TTL/CMOS Compatible
● Single Supply Operation Possible
● Simultaneous Update Facility
● Binary Input Coding
 
applications
● Process Control
● Automatic Test Equipment
● Automatic Calibration of Large System
   Parameters e.g., Gain/Offset

View
Part Name(s) : PCM54 PCM54HP PCM54JP PCM54KP PCM55 PCM55HP PCM55HP/1K PCM55JP BURR-BROWN
Burr-Brown -> Texas Instruments
Description : 16-Bit Monolithic DIGITAL-TO-ANALOG CONVERTERS

DESCRIPTION
The PCM54 and PCM55 family of CONVERTERS are parallel input, fully monotonic, 16-bit DIGITAL-TO-ANALOG CONVERTERS that are designed and specified for digital audio applications. These devices employ ultra-stable nichrome (NiCr) thin-film resistors to provide monotonicity, low distortion, and low differential linearity error (especially around bipolar zero) over long periods of time and over the full operating temperature.

FEATURES
● PARALLEL INPUT FORMAT
● 16-BIT RESOLUTION
● 15-BIT MONOTONICITY (typ)
● –92dB TOTAL HARMONIC DISTORTION (K Grade)
● 3µs SETTLING TIME (Voltage Out)
● 96dB DYNAMIC RANGE
● ±3V or ±1mA AUDIO OUTPUT
● OPERATES ON ±5V (PCM55) TO ±12V (PCM54) SUPPLIES
● 28-PIN DIP (PCM54)
● 24-LEAD SOIC (PCM55)

View
Part Name(s) : PCM54 PCM54HP PCM54JP PCM54KP PCM55 PCM55HP PCM55HP/1K PCM55JP BB
Burr-Brown -> Texas Instruments
Description : 16-Bit Monolithic DIGITAL-TO-ANALOG CONVERTERS

DESCRIPTION
The PCM54 and PCM55 family of CONVERTERS are parallel input, fully monotonic, 16-bit DIGITAL-TO-ANALOG CONVERTERS that are designed and specified for digital audio applications. These devices employ ultra-stable nichrome (NiCr) thin-film resistors to provide monotonicity, low distortion, and low differential linearity error (especially around bipolar zero) over long periods of time and over the full operating temperature.

FEATURES
● PARALLEL INPUT FORMAT
● 16-BIT RESOLUTION
● 15-BIT MONOTONICITY (typ)
● –92dB TOTAL HARMONIC DISTORTION (K Grade)
● 3µs SETTLING TIME (Voltage Out)
● 96dB DYNAMIC RANGE
● ±3V or ±1mA AUDIO OUTPUT
● OPERATES ON ±5V (PCM55) TO ±12V (PCM54) SUPPLIES
● 28-PIN DIP (PCM54)
● 24-LEAD SOIC (PCM55)

View
Part Name(s) : TLV5614-EP TLV5614MPWREP V62/06602-01XE 5614EP TI
Texas Instruments
Description : 2.7-V TO 5.5-V 12-BIT 3-µS QUADRUPLE DIGITAL-TO-ANALOG CONVERTERS WITH POWER DOWN

description
The TLV5614 is a quadruple 12-bit voltage output DIGITAL-TO-ANALOG converter (DAC) with a flexible four-wire serial interface. The four-wire serial interface allows glueless interface to TMS320 DSP family,SPI ,QSPI, and Microwire serial ports. The TLV5614 is programmed with a 16-bit serial word comprised of a DAC address, individual DAC control bits, and a 12-bit DAC value.

• Controlled Baseline
   − One Assembly
   − One Test Site
   − One Fabrication Site
• Extended Temperature Performance of −55°C to 125°C
• Enhanced Diminishing Manufacturing Sources (DMS) Support
• Enhanced Product-Change Notification
• Qualification Pedigree†
• Four 12-Bit DIGITAL-TO-ANALOG CONVERTERS (DACs)
• Programmable Settling Time of Either 3 µs or 9 µs (Typ)
• TMS320™ DSP Family, (Q)SPI, and Microwire Compatible Serial Interface
• Internal Power-On Reset
• Low Power Consumption:
   8 mW, Slow Mode − 5-V Supply
   3.6 mW, Slow Mode − 3-V Supply
• Reference Input Buffer
• Voltage Output Range . . . 2× the Reference Input Voltage
• Monotonic Overtemperature
• Dual 2.7-V to 5.5-V Supply (Separate Digital and Analog Supplies)
• Hardware Power Down (10 nA)
• Software Power Down (10 nA)
• Simultaneous Update

applications
• Battery-Powered Test Instruments
• Digital Offset and Gain Adjustment
• Industrial Process Controls
• Machine and Motion Control Devices
• Communications
• Arbitrary Waveform Generation

View
Part Name(s) : TLV5627 TLV5627C TLV5627CD TLV5627CDG4 TLV5627CDR TLV5627CDRG4 TLV5627CPW TLV5627CPWG4 TLV5627CPWR TLV5627CPWRG4 TLV5627I TLV5627ID TLV5627IDG4 TLV5627IPW TLV5627IPWG4 TLV5627IPWR TLV5627IPWRG4 TI
Texas Instruments
Description : 2.7-V TO 5.5 V 8-BIT 4-CHANNEL DIGITAL-TO-ANALOG CONVERTERS

description
The TLV5627 is a four channel, 8-BIT voltage output DIGITAL-TO-ANALOG converter (DAC) with a flexible 4-wire serial interface. The 4-wire serial interface allows glueless interface to TMS320, SPI, QSPI, and Microwire serial ports. The TLV5627 is programmed with a 16-bit serial word comprised of a DAC address, individual DAC control bits, and an 8-BIT DAC value.
   
● Four 8-BIT D/A CONVERTERS
● Programmable Settling Time
    of 2.5 µs or 8.5 µs Typ
● TMS320, (Q)SPI™, and Microwire
    Compatible Serial Interface
● Low Power Consumption:
    7 mW, Slow Mode − 5-V Supply
    3 mW, Slow Mode − 3-V Supply
● Reference Input Buffers
● Monotonic Over Temperature
● Dual 2.7-V to 5.5-V Supply (Separate Digital
    and Analog Supplies)
● Hardware Power Down
● Software Power Down
● Simultaneous Update
   
applications
● Battery Powered Test Instruments
● Digital Offset and Gain Adjustment
● Industrial Process Controls
● Machine and Motion Control Devices
● Arbitrary Waveform Generation
   

View

1

2345678910 Next

 

All Rights Reserved © datasheetbank.com 2014 - 2019 [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]