datasheetbank_Logo    Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site
Part Name  

P/N + Description + Content Search

Search Words :

Part Name(s) : ST6225LB1/XXX ST6225LB6/XXX ST6225LM1/XXX ST6225LM3/XXX ST6225LM6/XXX ST6225LN3/XXX ST6225LN6/XXX ST62P25LB1/XXX ST62P25LB6/XXX ST62P25LM1/XXX ST62P25LM3/XXX ST62P25LM6/XXX ST62P25LN1/XXX ST62P25LN3/XXX ST62P25LN6/XXX ST-Microelectronics
STMicroelectronics
Description : 8-BIT MCUS WITH A/D CONVERTER, TWO TIMERS, OSCILLATOR SAFEGUARD & SAFE RESET

INTRODUCTION
The ST6215C, 25C devices are low cost members of the ST62xx 8-BIT HCMOS family of microcontrollers, which is targeted at low to medium complexity applications. All ST62xx devices are based on a building block approach: a common core is surrounded by a number of on-chip peripherals.

■ Memories
    – 2K or 4K bytes Program memory (OTP, EPROM, FASTROM or ROM) WITH read-out protection
    – 64 bytes RAM
■ Clock, Reset and Supply Management
    – Enhanced reset system
    – Low Voltage Detector (LVD) for Safe Reset
    – Clock sources: crystal/ceramic resonator or RC neTWOrk, external clock, backup OSCILLATOR (LFAO)
    – OSCILLATOR SAFEGUARD (OSG)
    – 2 Power Saving Modes: Wait and Stop
■ Interrupt Management
    – 4 interrupt vectors plus NMI and RESET
    – 20 external interrupt lines (on 2 vectors)
    – 1 external non-interrupt line
■ 20 I/O Ports
    – 20 multifunctional bidirectional I/O lines
    – 16 alternate function lines
    – 4 high sink outputs (20mA)
■ 2 TIMERS
    – Configurable watchdog timer
    – 8-BIT timer/counter WITH a 7-bit prescaler
■ Analog Peripheral
    – 8-BIT ADC WITH 16 input channels
■ Instruction Set
    – 8-BIT data manipulation
    – 40 basic instructions
    – 9 addressing modes
    – Bit manipulation
■ Development Tools
    – Full hardware/software development package

View
Part Name(s) : ST6225BB1/XXX ST6225BB3/XXX ST6225BM1/XXX ST6225BM3/XXX ST6225BM6/XXX ST6225BN1/XXX ST6225BN3/XXX ST6225BN6/XXX ST6225CB1/XXX ST6225CB3/XXX ST6225CB6/XXX ST6225CM1/XXX ST6225CM3/XXX ST6225CM6/XXX ST6225CN1/XXX ST6225CN3/XXX ST6225CN6/XXX ST62P25BB1/XXX ST62P25BB3/XXX ST62P25BM1/XXX ST62P25BM3/XXX ST62P25BM6/XXX ST62P25BN1/XXX ST62P25BN3/XXX ST62P25BN6/XXX ST-Microelectronics
STMicroelectronics
Description : 8-BIT MCUS WITH A/D CONVERTER, TWO TIMERS, OSCILLATOR SAFEGUARD & safe reset

INTRODUCTION
The ST6200C, 01C and 03C devices are low cost members of the ST62xx 8-BIT HCMOS family of microcontrollers, which is targeted at low to medium complexity applications. All ST62xx devices are based on a building block approach: a common core is surrounded by a number of on-chip peripherals.
The ST62E01C is the erasable EPROM version of the ST62T00C, T01 and T03C devices, which may be used during the development phase for the ST62T00C, T01 and T03C target devices, as well as the respective ST6200C, 01C and 03C ROM devices.
OTP and EPROM devices are functionally identical. OTP devices offer all the advantages of user programmability at low cost, which make them the ideal choice in a wide range of applications where frequent code changes, multiple code versions or last minute programmability are required.

■ Memories
   – 1K or 2K bytes Program memory (OTP,
      EPROM, FASTROM or ROM) WITH read-out
      protection
   – 64 bytes RAM
■ Clock, Reset and Supply Management
   – Enhanced reset system
   – Low voltage detector (LVD) for safe Reset
   – Clock sources: crystal/ceramic resonator or
      RC neTWOrk, external clock, backup OSCILLATOR
      (LFAO)
   – OSCILLATOR SAFEGUARD (OSG)
   – 2 Power saving modes: Wait and Stop
■ Interrupt Management
   – 4 interrupt vectors plus NMI and RESET
   – 9 external interrupt lines (on 2 vectors)
■ 9 I/O Ports
   – 9 multifunctional bidirectional I/O lines
   – 4 alternate function lines
   – 3 high sink outputs (20mA)
■ 2 TIMERS
   – Configurable watchdog timer
   – 8-BIT timer/counter WITH a 7-bit prescaler
■ Analog Peripheral
   – 8-BIT ADC WITH 4 input channels (except on
      ST6203C)
■ Instruction Set
   – 8-BIT data manipulation
   – 40 basic instructions
   – 9 addressing modes
   – Bit manipulation
■ Development Tools
   – Full hardware/software development package

View
Part Name(s) : ST6208 ST6208B ST6208L ST6209 ST6209B ST6209L ST6210 ST6210B ST6210L ST6220 ST6220B ST6220L ST62E08 ST62E08B ST62E08L ST62E09 ST62E09B ST62E09L ST62E10 ST62E10B ST62E10L ST62E20B ST62E20L ST62P08 ST62P08B ST-Microelectronics
STMicroelectronics
Description : 8-BIT MCUS WITH A/D CONVERTER,TWO TIMERS, OSCILLATOR SAFEGUARD & SAFE RESET

INTRODUCTION
The ST6208C, 09C, 10C and 20C devices are low cost members of the ST62xx 8-BIT HCMOS family of microcontrollers, which is targeted at low to medium complexity applications. All ST62xx devices are based on a building block approach: a common core is surrounded by a number of on-chip peripherals.

■ Memories
    – 1K, 2K or 4K bytes Program memory (OTP, EPROM, FASTROM or ROM) WITH read-out protection
    – 64 bytes RAM
■ Clock, Reset and Supply Management
    – Enhanced reset system
    – Low Voltage Detector (LVD) for Safe Reset
    – Clock sources: crystal/ceramic resonator or RC neTWOrk, external clock, backup OSCILLATOR (LFAO)
    – OSCILLATOR SAFEGUARD (OSG)
    – 2 Power Saving Modes: Wait and Stop
■ Interrupt Management
    – 4 interrupt vectors plus NMI and RESET
    – 12 external interrupt lines (on 2 vectors)
■ 12 I/O Ports
    – 12 multifunctional bidirectional I/O lines
    – 8 alternate function lines
    – 4 high sink outputs (20mA)
■ 2 TIMERS
    – Configurable watchdog timer
    – 8-BIT timer/counter WITH a 7-bit prescaler
■ Analog Peripheral
    – 8-BIT ADC WITH 4 or 8 input channels (except on ST6208C)
■ Instruction Set
    – 8-BIT data manipulation
    – 40 basic instructions
    – 9 addressing modes
    – Bit manipulation
■ Development Tools
    – Full hardware/software development package

View
Part Name(s) : ST62P10CB1/XXX ST62P10CB3/XXX ST62P10CB6/XXX ST62P10CM1/XXX ST62P10CM6/XXX ST-Microelectronics
STMicroelectronics
Description : 8-BIT OTP/EPROM MCUS WITH A/D CONVERTER, OSCILLATOR SAFEGUARD, SAFE RESET AND 20 PINS

GENERAL DESCRIPTION
INTRODUCTION
The ST62T08C,T09C,T10C,T20C and ST62E20C devices are low cost members of the ST62xx 8-BIT HCMOS family of microcontrollers, which is targeted at low to medium complexity applications. All ST62xx devices are based on a building block approach: a common core is surrounded by a number of on-chip peripherals.

■ 3.0 to 6.0V Supply Operating Range
■ 8 MHz Maximum Clock Frequency
■ -40 to +125°C Operating Temperature Range
■ Run, Wait and Stop Modes
■ 5 Interrupt Vectors
■ Look-up Table capability in Program Memory
■ Data Storage in Program Memory: User selectable size
■ Data RAM: 64bytes
■ User Programmable Options
■ 12 I/O pins, fully programmable as:
    – Input WITH pull-up resistor
    – Input WITHout pull-up resistor
    – Input WITH interrupt generation
    – Open-drain or push-pull output
    – Analog Input (except ST62T08C)
■ 4 I/O lines can sink up to 20mA to drive LEDs or TRIACs directly
8-BIT Timer/Counter WITH 7-bit programmable prescaler
■ Digital Watchdog
OSCILLATOR Safe Guard
■ Low Voltage Detector for Safe Reset
8-BIT A/D CONVERTER WITH up to 8 analog inputs
■ On-chip Clock OSCILLATOR can be driven by Quartz Crystal Ceramic resonator or RC neTWOrk
■ Power-on Reset
■ One external Non-Maskable Interrupt
■ ST626x-EMU2 Emulation and Development System (connects to an MS-DOS PC via a parallel port)

View
Part Name(s) : ST6208CB1/XXX ST6208CB3/XXX ST6208CB6/XXX ST6208CM1/XXX ST6208CM6/XXX ST-Microelectronics
STMicroelectronics
Description : 8-BIT OTP/EPROM MCUS WITH A/D CONVERTER, OSCILLATOR SAFEGUARD, SAFE RESET AND 20 PINS

GENERAL DESCRIPTION
INTRODUCTION
The ST62T08C,T09C,T10C,T20C and ST62E20C devices are low cost members of the ST62xx 8-BIT HCMOS family of microcontrollers, which is targeted at low to medium complexity applications. All ST62xx devices are based on a building block approach: a common core is surrounded by a number of on-chip peripherals.

■ 3.0 to 6.0V Supply Operating Range
■ 8 MHz Maximum Clock Frequency
■ -40 to +125°C Operating Temperature Range
■ Run, Wait and Stop Modes
■ 5 Interrupt Vectors
■ Look-up Table capability in Program Memory
■ Data Storage in Program Memory: User selectable size
■ Data RAM: 64bytes
■ User Programmable Options
■ 12 I/O pins, fully programmable as:
    – Input WITH pull-up resistor
    – Input WITHout pull-up resistor
    – Input WITH interrupt generation
    – Open-drain or push-pull output
    – Analog Input (except ST62T08C)
■ 4 I/O lines can sink up to 20mA to drive LEDs or TRIACs directly
8-BIT Timer/Counter WITH 7-bit programmable prescaler
■ Digital Watchdog
OSCILLATOR Safe Guard
■ Low Voltage Detector for Safe Reset
8-BIT A/D CONVERTER WITH up to 8 analog inputs
■ On-chip Clock OSCILLATOR can be driven by Quartz Crystal Ceramic resonator or RC neTWOrk
■ Power-on Reset
■ One external Non-Maskable Interrupt
■ ST626x-EMU2 Emulation and Development System (connects to an MS-DOS PC via a parallel port)

View
Part Name(s) : ST6208C ST6209C ST6210C ST6220C ST62P08C ST62P08CB1/XXX ST62P08CB3/XXX ST62P08CB6/XXX ST62P08CM1/XXX ST62P08CM3/XXX ST62P08CM6/XXX ST62P09C ST62P09CB1/XXX ST62P09CB3/XXX ST62P09CB6/XXX ST62P09CM1/XXX ST62P09CM3/XXX ST62P09CM6/XXX ST62P10C ST62P10CB1/XXX ST62P10CB3/XXX ST62P10CB6/XXX ST62P10CM1/XXX ST62P10CM3/XXX ST62P10CM6/XXX STMICROELECTRONICS
STMicroelectronics
Description : 8-BIT OTP/EPROM MCUS WITH A/D CONVERTER, OSCILLATOR SAFEGUARD, SAFE RESET AND 20 PINS

GENERAL DESCRIPTION
INTRODUCTION
The ST62T08C,T09C,T10C,T20C and ST62E20C devices are low cost members of the ST62xx 8-BIT HCMOS family of microcontrollers, which is targeted at low to medium complexity applications. All ST62xx devices are based on a building block approach: a common core is surrounded by a number of on-chip peripherals.
The ST62E20C is the erasable EPROM version of the ST62T08C,T09C,T10C and T20C device, which may be used to emulate the ST62T08C,T09C,T10C and T20C device, as well as the respective ST6208C,09C,10C,20C ROM devices.

■ 3.0 to 6.0V Supply Operating Range
■ 8 MHz Maximum Clock Frequency
■ -40 to +125°C Operating Temperature Range
■ Run, Wait and Stop Modes
■ 5 Interrupt Vectors
■ Look-up Table capability in Program Memory
■ Data Storage in Program Memory: User selectable size
■ Data RAM: 64bytes
■ User Programmable Options
■ 12 I/O pins, fully programmable as:
    – Input WITH pull-up resistor
    – Input WITHout pull-up resistor
    – Input WITH interrupt generation
    – Open-drain or push-pull output
    – Analog Input (except ST62T08C)
■ 4 I/O lines can sink up to 20mA to drive LEDs or TRIACs directly
8-BIT Timer/Counter WITH 7-bit programmable prescaler
■ Digital Watchdog
OSCILLATOR Safe Guard
■ Low Voltage Detector for Safe Reset
8-BIT A/D CONVERTER WITH up to 8 analog inputs
■ On-chip Clock OSCILLATOR can be driven by Quartz Crystal Ceramic resonator or RC neTWOrk
■ Power-on Reset
■ One external Non-Maskable Interrupt
■ ST626x-EMU2 Emulation and Development System (connects to an MS-DOS PC via a parallel port)

View
Part Name(s) : ST62E20C ST62E20CF1 ST62T08C ST62T08CB6 ST62T08CM6 ST62T09C ST62T09CB6 ST62T09CM6 ST62T10C ST62T10CB6 ST62T10CM6 ST62T20C ST62T20CB3 ST62T20CB6 ST62T20CM3 ST62T20CM6 ST6208CB1/XXX ST6208CB6/XXX ST6208CB3/XXX ST6208CM1/XXX ST6208CM6/XXX ST6208CM3/XXX ST6209CB1/XXX ST6209CB6/XXX ST6209CB3/XXX STMICROELECTRONICS
STMicroelectronics
Description : 8-BIT OTP/EPROM MCUS WITH A/D CONVERTER, OSCILLATOR SAFEGUARD, SAFE RESET AND 20 PINS

 INTRODUCTION
The ST62T08C,T09C,T10C,T20C and ST62E20C devices are low cost members of the ST62xx 8-BIT HCMOS family of microcontrollers, which is targeted at low to medium complexity applications. All ST62xx devices are based on a building block approach: a common core is surrounded by a number of on-chip peripherals.

■ 3.0 to 6.0V Supply Operating Range
■ 8 MHz Maximum Clock Frequency
■ -40 to +125°C Operating Temperature Range
■ Run, Wait and Stop Modes
■ 5 Interrupt Vectors
■ Look-up Table capability in Program Memory
■ Data Storage in Program Memory: User selectable size
■ Data RAM: 64bytes
■ User Programmable Options
■ 12 I/O pins, fully programmable as:
    – Input WITH pull-up resistor
    – Input WITHout pull-up resistor
    – Input WITH interrupt generation
    – Open-drain or push-pull output
    – Analog Input (except ST62T08C)
■ 4 I/O lines can sink up to 20mA to drive LEDs or TRIACs directly
8-BIT Timer/Counter WITH 7-bit programmable prescaler
■ Digital Watchdog
OSCILLATOR Safe Guard
■ Low Voltage Detector for Safe Reset
8-BIT A/D CONVERTER WITH up to 8 analog inputs
■ On-chip Clock OSCILLATOR can be driven by Quartz Crystal Ceramic resonator or RC neTWOrk
■ Power-on Reset
■ One external Non-Maskable Interrupt
■ ST626x-EMU2 Emulation and Development System (connects to an MS-DOS PC via a parallel port)

View
Part Name(s) : ST6210BB1_HWD ST6210BB1_SWD ST6210BB6BM1_HWD ST6210BB6BM1_SWD ST6210BM6_HWD ST6210BM6_SWD ST6215BB1_HWD ST6215BB1_SWD ST6215BB6BM1_HWD ST6215BB6BM1_SWD ST6215BM6_HWD ST6215BM6_SWD ST6220BB1_HWD ST6220BB1_SWD ST6220BB6BM1_HWD ST6220BB6BM1_SWD ST6220BM6_HWD ST6220BM6_SWD ST6225BB1_HWD ST6225BB1_SWD ST6225BB6BM1_HWD ST6225BB6BM1_SWD ST6225BM6_HWD ST6225BM6_SWD ST62E20F1_HWD ST-Microelectronics
STMicroelectronics
Description : 8-BIT OTP/EPROM MCUS WITH A/D CONVERTER

8-BIT OTP/EPROM MCUS WITH A/D CONVERTER

View
Part Name(s) : ST6200BMA ST6200BMC ST6200BNA ST6200BNC ST6200CM-AUTO ST6200CMA ST6200CMC ST6200CNA ST6200CNC ST6200LMA ST6200LMC ST6200LNA ST6200LNC ST6201BMA ST6201BMC ST6201BNA ST6201BNC ST6201CM-AUTO ST6201CMA ST6201CMC ST6201CNA ST6201CNC ST6201LMA ST6201LMC ST6201LNA ST-Microelectronics
STMicroelectronics
Description : 8-BIT MCUS WITH A/D CONVERTER, TWO TIMERS, OSCILLATOR SAFEGUARD & SAFE RESET

INTRODUCTION
The ST6200C, 01C and 03C devices are low cost members of the ST62xx 8-BIT HCMOS family of microcontrollers, which is targeted at low to medium complexity applications. All ST62xx devices are based on a building block approach: a common core is surrounded by a number of on-chip peripherals.
The ST62E01C is the erasable EPROM version of the ST62T00C, T01 and T03C devices, which may be used during the development phase for the ST62T00C, T01 and T03C target devices, as well as the respective ST6200C, 01C and 03C ROM devices.

■ Memories
   – 1K or 2K bytes Program memory (OTP,
      EPROM, FASTROM or ROM) WITH read-out protection
   – 64 bytes RAM
■ Clock, Reset and Supply Management
   – Enhanced reset system
   – Low Voltage Detector (LVD) for Safe Reset
   – Clock sources: crystal/ceramic resonator or
      RC neTWOrk, external clock, backup OSCILLATOR (LFAO)
   – OSCILLATOR SAFEGUARD (OSG)
   – 2 Power Saving Modes: Wait and Stop
■ Interrupt Management
   – 4 interrupt vectors plus NMI and RESET
   – 9 external interrupt lines (on 2 vectors)
■ 9 I/O Ports
   – 9 multifunctional bidirectional I/O lines
   – 4 alternate function lines
   – 3 high sink outputs (20mA)
■ 2 TIMERS
   – Configurable watchdog timer
   – 8-BIT timer/counter WITH a 7-bit prescaler
■ Analog Peripheral
   – 8-BIT ADC WITH 4 input channels (except on ST6203C)
■ Instruction Set
   – 8-BIT data manipulation
   – 40 basic instructions
   – 9 addressing modes
   – Bit manipulation
■ Development Tools
   – Full hardware/software development package

View
Part Name(s) : ST62E20 ST62E25 ST62T10 ST62T10B6/HWD ST62T10B6/SWD ST62T10M6/HWD ST62T10M6/SWD ST62T15 ST62T15B6/HWD ST62T15B6/SWD ST62T15M6/HWD ST62T15M6/SWD ST62T20 ST62T20B6/HWD ST62T20B6/SWD ST62T20M6/HWD ST62T20M6/SWD ST62T25 ST62T25B6/HWD ST62T25B6/SWD ST62T25M6/HWD ST62T25M6/SWD ST62E20F1/HWD ST62E20F1/SWD ST62E25F1/HWD ST-Microelectronics
STMicroelectronics
Description : 8-BIT OTP/EPROM MCUS WITH A/D CONVERTER

8-BIT OTP/EPROM MCUS WITH A/D CONVERTER

View

1

2345678910 Next

 

All Rights Reserved © datasheetbank.com 2014 - 2019 [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]