datasheetbank_Logo    Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site
Part Name  

P/N + Description + Content Search

Search Words :

Part Name(s) : SFH6755T SFH6756T SFH6757T Vishay
Vishay Semiconductors
Description : High Speed OPTOCOUPLER, 10 MBD, SOIC-8 Package

DESCRIPTION
The SFH675xT-series, is a dual channel 10 MBD OPTOCOUPLER utilizing a high efficient INPUT LED coupled with an integrated optical photodiode IC detector. The detector has an open drain NMOS-transister output, providing less leakage compared to an open collector Schottky clamped transister output. The internal shield provides a guaranteed common mode transient immunity of 5 kV/µs for the SFH6756T and 15 kV/µs for the SFH6757T. The use of a 0.1 µF bypass capacitor connected between pin 5 and 8 is recommended.

FEATURES
• Choice of CMR performance of 15 kV/µs, 5 kV/µs, and 100 V/µs
• External creepage distance > 5 mm
• High speed: 10 MBD typical
• + 5 V CMOS compatibility
• Guaranteed AC and DC performance over temperature: - 40 °C to + 100 °C temperature range
• Pure tin leads
• Meets IEC 60068-2-42 (SO2) and IEC 60068-2-43 (H2S) requirements
LOW INPUT CURRENT capability: 5 mA
• Lead (Pb)-free component
• Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC

APPLICATIONS
• Microprocessor system interface
• PLC, ATE INPUT/output isolation
• Computer peripheral interface
• Digital fieldbus isolation: CC-link, DeviceNet, profibus, SDS
• High speed A/D and D/A conversion
• AC plasma display panel level shifting
• Multiplexed data transmission
• Digital control power supply
• Ground loop elimination

 

View
Part Name(s) : IL222AT IL223AT IL221AT 222AT 223AT Vishay
Vishay Semiconductors
Description : OPTOCOUPLER, Photodarlington Output, LOW INPUT CURRENT, High Gain, with Base Connection

DESCRIPTION
The IL221AT/IL222AT/IL223AT is a high CURRENT transfer ratio (CTR) OPTOCOUPLER with a gallium arsenide infrared LED emitter and a silicon NPN photodarlington transistor detector.
The device has a CTR tested at 1.0 mA LED CURRENT. This LOW drive CURRENT permits easy interfacing from CMOS to LSTTL or TTL.
This OPTOCOUPLER is constructed in a standard SOIC-8 foot print which makes it ideally suited for high density applications. In addition to eliminating through-hole requirements, this package conforms to standards for surface mount devices.

FEATURES
• Isolation test voltage, 4000 VRMS
• Industry standard SOIC-8 surface mountable
   package
• Standard lead spacing, 0.05"
• Available only on tape and reel (conforms to
   EIA standard RS481A)
• Compatible with dual wave, vapor phase and IR refLOW
   soldering
• Lead (Pb)-free component
• Component in accordance to RoHS 2002/95/EC and
   WEEE 2002/96/EC

View
Part Name(s) : HCPL-0300 HCPL-0300-060 HCPL-0300-060E HCPL-0300-300 HCPL-0300-300E HCPL-0300-500 HCPL-0300-500E HCPL-0300-XXXE HCPL-2300 HCPL-2300-060 HCPL-2300-060E HCPL-2300-300 HCPL-2300-300E HCPL-2300-500 HCPL-2300-500E HCPL-2300-XXXE HP
HP => Agilent Technologies
Description : 8 MBD LOW INPUT CURRENT OPTOCOUPLER

Description
The HCPL-2300/HCPL-0300 OPTOCOUPLER combines an 820 nm AlGaAs photon emitting diode with an integrated high gain photon detector. This combination of Agilent designed and manufactured semiconductor devices brings new high performance capabilities to designers of isolated logic and data communication circuits.
The new LOW CURRENT, high speed AlGaAs emitter manufactured with a unique diffused junction, has the virtue of fast rise and fall times at LOW drive CURRENTs.
Figure 6 illustrates the propagation delay vs. INPUT CURRENT characteristic. These unique characteristics enable this device to be used in an RS-232-C interface with ground loop isolation and improved common mode rejection. As a line receiver, the HCPL-2300/HCPL-0300 will operate over longer line lengths for a given data rate because of LOWer IF and VF specifications.

Features
• Guaranteed LOW Thresholds:
   IF = 0.5 mA, VF ≤ 1.5 V
• High Speed: Guaranteed 5 MBD over Temperature
• Versatile: Compatible with TTL, LSTTL and CMOS
• Efficient 820 nm AlGaAs LED
• Internal Shield for Guaranteed Common Mode Rejection
• Schottky Clamped, Open Collector Output with Optional Integrated Pull-Up Resistor
• Static and Dynamic Performance Guaranteed from -40°C to 85°C
• Safety Approval
   UL Recognized -3750 V rms for
      1 minute
   CSA Approved
   IEC/EN/DIN EN 60747-5-2
   Approved with VIORM = 630
   V peak
   (Option 060)
  
Applications
• Ground Loop Elimination
• Computer-Peripheral Interfaces
• Level Shifting
• Microprocessor System Interfaces
• Digital Isolation for A/D, D/A Conversion
• RS-232-C Interface
• High Speed, Long Distance Isolated Line Receiver

 

View
Part Name(s) : IL201 IL202 IL203 IL203-X007 IL203-X009 Vishay
Vishay Semiconductors
Description : OPTOCOUPLER, Phototransistor Output, LOW INPUT CURRENT, LOW INPUT CURRENT, with Base Connection

DESCRIPTION
The IL201/IL202/IL203 are optically coupled pairs employing a gallium arsenide infrared LED and a silicon NPN
phototransistor. Signal information, including a DC level, can be transmitted by the device while maintaining a high degree of electrical isolation between INPUT and output. The IL201/IL202/IL203 can be used to replace relays and transformers in many digital interface applications, as well as analog applications such as CRT modulation.

FEATURES
• Guaranteed at IF= 1.0 mA
• High collector emitter voltage, BVCEO= 70 V
• Long term stability
• Industry standard DIP package
• Lead (Pb)-free component
• Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC

 

View
Part Name(s) : SFH6345 SFH6345-X006 SFH6345-X007 SFH6345-X009 Vishay
Vishay Semiconductors
Description : High Speed OPTOCOUPLER, 1 MBD, 15 kV/µs CMR, Transistor Output

DESCRIPTION
The SFH6345 is an OPTOCOUPLER with a GaAlAs infrared emitting diode, optically coupled to an integrated photo detector consisting of a photo diode and a high speed transistor in a DIP-8 plastic package. The device is similar to the 6N135 but has an additional faraday shield on the
detector which enhances the INPUT-output dV/dt immunity. Signals can be transmitted between two electrically separated circuits up to frequencies of 2 MHz. The potential difference between the circuits to be coupled should not exceed the maximum permissible reference voltages.

FEATURES
• Direct replacement for HCPL 4503
• High speed OPTOCOUPLER without base connection
• Isolation test voltage: 5300 VRMS
• GaAlAs emitter
• Integrated detector with photo diode and transistor
• High data transmission rate: 1.0 MBit/s
• TTL compatible
• Open collector output
• Good CTR linearity relative to forward CURRENT
• Field effect stable
LOW coupling capacitance
• Very high common mode transient immunity dV/dt: ≥15 kV/µs at VCM= 1500 V
• Lead (Pb)-free component
• Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC

View
Part Name(s) : 6N138 6N139 Infineon
Infineon Technologies
Description : LOW INPUT CURRENT, HIGH GAIN OPTOCOUPLER

DESCRIPTION
High common mode transient immunity and very high CURRENT ratio together with 2500 VAC insulation are achieved by coupling an LED with an integrated high gain photo detector in an eight pin dual-in-line package. Separate pins for the photodiode and output stage enable TTL compatible saturation voltages with high speed operation. Photodarlington operation is achieved by tying the VCC and VO terminals together. Access to the base terminal alLOWs adjustment to the gain bandwidth.
The 6N138 is ideal for TTL applications since the 300% minimum CURRENT transfer ratio with an LED CURRENT of 1.6 mA enables operation with one unit load-in and one unit load-out with a 2.2 KΩ pull-up resistor.
The 6N139 is best suited for LOW power logic applications involving CMOS and LOW power TTL. A 400% CURRENT transfer ratio with only 0.5 mA of LED CURRENT is guaranteed from 0°C to 70°C.

FEATURES
• High CURRENT Transfer Ratio, 800%
LOW INPUT CURRENT, 0.5mA
• High Output CURRENT, 60mA
• Isolation Test Voltage, 2500 VACRMS
• TTL Compatible Output, VOL=0.1 V
• High Common Mode Rejection, 500V/µsec.
• Adjustable Bandwidth–Access to Base
• Standard Molded Dip Plastic Package
• Underwriters Lab File #E52744

APPLICATIONS
• Logic Ground Isolation–TTL/TTL, TTL/CMOS, CMOS/CMOS, CMOS/TTL
• EIA RS 232C Line Receiver
LOW INPUT CURRENT Line Receiver–Long Lines, Party Lines
• Telephone Ring Detector
• 117 VAC Line Voltage Status Indication–LOW INPUT Power Dissipation
LOW Power Systems–Ground Isolation

View
Part Name(s) : 6N138 6N139 Siemens
Siemens AG
Description : LOW INPUT CURRENT, HIGH GAIN OPTOCOUPLER

DESCRIPTION
High common mode transient immunity and very high CURRENT ratio together with 2500 VAC insulation are achieved by coupling an LED with an integrated high gain photo detector in an eight pin dual-in-line package. Separate pins for the photodiode and output stage enable TTL compatible saturation voltages with high speed operation. Photodarlington operation is achieved by tying the VCC and VO terminals together. Access to the base terminal alLOWs adjustment to the gain bandwidth.
The 6N138 is ideal for TTL applications since the 300% minimum CURRENT transfer ratio with an LED CURRENT of 1.6 mA enables operation with one unit load-in and one unit load-out with a 2.2 KΩ pull-up resistor.
The 6N139 is best suited for LOW power logic applications involving CMOS and LOW power TTL. A 400% CURRENT transfer ratio with only 0.5 mA of LED CURRENT is guaranteed from 0°C to 70°C.

FEATURES
• High CURRENT Transfer Ratio, 800%
LOW INPUT CURRENT, 0.5mA
• High Output CURRENT, 60mA
• Isolation Test Voltage, 2500 VACRMS
• TTL Compatible Output, VOL=0.1 V
• High Common Mode Rejection, 500V/µsec.
• Adjustable Bandwidth–Access to Base
• Standard Molded Dip Plastic Package
• Underwriters Lab File #E52744

APPLICATIONS
• Logic Ground Isolation–TTL/TTL, TTL/CMOS, CMOS/CMOS, CMOS/TTL
• EIA RS 232C Line Receiver
LOW INPUT CURRENT Line Receiver–Long Lines, Party Lines
• Telephone Ring Detector
• 117 VAC Line Voltage Status Indication–LOW INPUT Power Dissipation
LOW Power Systems–Ground Isolation

View
Part Name(s) : VOM452T VOM453T Vishay
Vishay Semiconductors
Description : Analog High Speed OPTOCOUPLER, 1 MBD, Transistor Output, SOP-5 Package

DESCRIPTION
The VOM452T and VOM453T, high speed OPTOCOUPLERs, each consists of a GaAlAs infrared emitting diode, optically coupled with an integrated photo detector and a high speed transistor. The photo detector isjunction isolated from the transistor to reduce miller capacitance effects. The open  collector output function alLOWs circuit designers to adjust the load conditions when interfacing with different logic systems such as TTL, CMOS, etc.

FEATURES
• Surface mountable
• Industry standard SOP-5 footprint
• Compatible with infrared vapor phase refLOW and wave soldering processes
• Isolation test voltage, 3750 VRMS
• Very high common mode transient immunity:
  15 000 V/µs at VCM= 1500 V guaranteed (VOM453T)
• High speed: 1 MBD
• TTL compatible
• Open collector output
• Compliant to RoHS directive 2002/95/EC and in accordance to WEEE 2002/96/EC

APPLICATIONS
• Fieldbus communication and control
• Logic ground isolation
• Analog signal ground isolation
• Replace pulse transformers

View
Part Name(s) : SFH608 SFH608-2 SFH608-3 SFH608-4 SFH608-5 Infineon
Infineon Technologies
Description : PHOTOTRANSISTOR, 5.3 KV, TRIOS® LOW CURRENT OPTOCOUPLER

DESCRIPTION
The SFH 608 is an OPTOCOUPLER designed for high CURRENT transfer ratio at LOW INPUT CURRENTs with the output transistor saturated. This makes the device ideal for LOW CURRENT switching applications. The SFH608 is packaged in a six pin plastic DIP.
* TRIOS—TRansparent IOn Shield

FEATURES
• Very High CTR at IF=1 mA, VCE=0.5 V
   - SFH608-2, 63-125%
   - SFH608-3, 100-200%
   - SFH608-4, 160-320%
   - SFH608-5, 250-500%
• Specified Minimum CTR at IF=0.5 mA, VCE=1.5 V: ≥ 32% (typ. 120%)
• Good CTR Linearity with Forward CURRENT
LOW CTR Degradation
• High Collector-Emitter Voltage VCEO=55 V
• Isolation Test Voltage: 5300 VACRMS
LOW CURRENT INPUT
LOW Coupling Capacitance
• High Common Mode Transient Immunity
• Phototransistor OPTOCOUPLER in 6 Pin DIP Package
• Field Effect Stable: TRIOS*
• VDE 0884 Available with Option 1
• Underwriters Lab File #E52744
• Applications
   - Telecommunications
   - Industrial Controls
   - Office Machines
   - Microprocessor System Interfaces

View
Part Name(s) : SFH608 SFH608-2 SFH608-3 SFH608-4 SFH608-5 Siemens
Siemens AG
Description : PHOTOTRANSISTOR, 5.3 KV, TRIOS® LOW CURRENT OPTOCOUPLER

DESCRIPTION
The SFH 608 is an OPTOCOUPLER designed for high CURRENT transfer ratio at LOW INPUT CURRENTs with the output transistor saturated. This makes the device ideal for LOW CURRENT switching applications. The SFH608 is packaged in a six pin plastic DIP.
* TRIOS—TRansparent IOn Shield

FEATURES
• Very High CTR at IF=1 mA, VCE=0.5 V
   - SFH608-2, 63-125%
   - SFH608-3, 100-200%
   - SFH608-4, 160-320%
   - SFH608-5, 250-500%
• Specified Minimum CTR at IF=0.5 mA, VCE=1.5 V: ≥ 32% (typ. 120%)
• Good CTR Linearity with Forward CURRENT
LOW CTR Degradation
• High Collector-Emitter Voltage VCEO=55 V
• Isolation Test Voltage: 5300 VACRMS
LOW CURRENT INPUT
LOW Coupling Capacitance
• High Common Mode Transient Immunity
• Phototransistor OPTOCOUPLER in 6 Pin DIP Package
• Field Effect Stable: TRIOS*
• VDE 0884 Available with Option 1
• Underwriters Lab File #E52744
• Applications
   - Telecommunications
   - Industrial Controls
   - Office Machines
   - Microprocessor System Interfaces

View

1

2345678910 Next

 

All Rights Reserved © datasheetbank.com 2014 - 2019 [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]