datasheetbank_Logo    Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site
Part Name  

P/N + Description + Content Search

Search Words :

Part Name(s) : TLC2554 TLC2554CD TLC2554CPW TLC2554ID TLC2554IPW TLC2558 TLC2558CDW TLC2558CDWG4 TLC2558CPW TLC2558IDW TLC2558IDWG4 TLC2558IPW TLC2558IPWR TLC2554I Y2554 TLC2558C TLC2558I Y2558 Texas-Instruments
Texas Instruments
Description : 5-V, 12-BIT, 400 KSPS, 4/8 CHANNEL, LOW POWER, SERIAL ANALOG-TO-DIGITAL CONVERTERS WITH AUTO POWER DOWN

description
The TLC2558 and TLC2554 are a family of high-performance, 12-BIT LOW POWER, 1.6 µs, CMOS ANALOG-TO-DIGITAL CONVERTERS (ADC) which operate from a single 5 V POWER supply.

● Maximum Throughput 400 KSPS
● Built-In Reference and 8× FIFO
● Differential/Integral Nonlinearity Error:
   ±1 LSB
● Signal-to-Noise and Distortion Ratio:
   69 dB, fi = 12 kHz
● Spurious Free Dynamic Range: 75 dB,
   fi = 12 kHz
● SPI/DSP-Compatible SERIAL Interfaces With
   SCLK up to 20 MHz
● Single Supply 5 Vdc
● Analog Input Range 0 V to Supply Voltage
   With 500 kHz BW
● Hardware Controlled and Programmable
   Sampling Period
LOW Operating Current (4 mA at 5.5 V
   External Ref, 6 mA at 5.5 V, Internal Ref)
POWER Down: Software/Hardware
   POWER-Down Mode (1 µA Max, Ext Ref),
   Auto POWER-Down Mode (1 µA, Ext Ref)
● Programmable Auto-CHANNEL Sweep

View
Part Name(s) : TLC1514 TLC1514D TLC1514DW TLC1514I TLC1514ID TLC1514IDG4 TLC1514IPW TLC1514PW TLC1518 TLC1518D TLC1518DW TLC1518I TLC1518IDW TLC1518IPW TLC1518PW TI
Texas Instruments
Description : 5-V, 10-BIT, 400 KSPS, 4/8 CHANNEL, LOW POWER, SERIAL ANALOG-TO-DIGITAL CONVERTERS WITH AUTO POWER DOWN

description
The TLC1518 and TLC1514 are a family of high-performance, 10-bit, LOW POWER, 1.4 µs, CMOS SAR ANALOG-TO-DIGITAL CONVERTERS (ADC) which operate from a single 5 V POWER supply. These devices have three digital inputs and a 3-state output [chip select (CS), SERIAL input-output clock (SCLK), SERIAL data input (SDI), and SERIAL data output (SDO)] that provide a direct 4-wire interface to the SERIAL port of most popular host microprocessors (SPI interface). When interfaced with a DSP, a frame sync (FS) signal is used to indicate the start of a SERIAL data frame.

• Maximum Throughput 400 KSPS
• Built-In Reference and 8× FIFO
• Differential/Integral Nonlinearity Error: ±0.5 LSB Max
• Signal-to-Noise and Distortion Ratio: 59 dB, fi = 12 kHz
• Spurious Free Dynamic Range: 72 dB, fi = 12 kHz
• SPI/DSP-Compatible SERIAL Interfaces With SCLK up to 20 MHz  Single Supply 5 Vdc
• Analog Input Range 0 V to Supply Voltage With 500 kHz BW
• Hardware Controlled and Programmable Sampling Period
LOW Operating Current (4 mA at 5.5 V External Ref, 6 mA at 5.5 V, Internal Ref)
POWER Down: Software/Hardware
   POWER-Down Mode (1 µA Max, Ext Ref),
   Auto POWER-Down Mode (5 µA, Ext Ref)
• Programmable Auto-CHANNEL Sweep
• Pin Compatible, 12-BIT Upgrades Available (TLC2554, TLC2558)

 

View
Part Name(s) : TLC2551IDGKR TI
Texas Instruments
Description : 5-V, LOW-POWER, 12-BIT, 175/360 KSPS, SERIAL ANALOG-TO-DIGITAL CONVERTERS WITH AUTOPOWER DOWN

description
The TLC2551, TLC2552, and TLC2555 are a family of high performance, 12-BIT, LOW-POWER, miniature, CMOS ANALOG-TO-DIGITAL CONVERTERS (ADC). The TLC255x family uses a 5-V supply.

● Maximum Throughput . . . 175/360 KSPS
● INL/DNL: ±1 LSB Max, SINAD: 72 dB, SFDR: 85 dB, fi = 20 kHz
● SPI/DSP-Compatible SERIAL Interface
● Single 5-V Supply
● Rail-to-Rail Analog Input With 500 kHz BW
● Three Options Available:
    – TLC2551: Single CHANNEL Input
    – TLC2552: Dual CHANNELs With Autosweep
    – TLC2555: Single CHANNEL With Pseudo-Differential Input
LOW POWER With AutoPOWER Down
    – Operating Current: 3.5 mA AutoPOWER Down: 8 µA
● Small 8-Pin MSOP and SOIC Packages

View
Part Name(s) : 5962-9957002Q2A 5962-9957002QRA TLC2554 TLC2554CD TLC2554CDG4 TLC2554CDR TLC2554CPW TLC2554ID TLC2554IDG4 TLC2554IDR TLC2554IPW TLC2554IPWG4 TLC2554IPWR TLC2554QD TLC2554QDR TLC2558 TLC2558CDW TLC2558CDWG4 TLC2558CDWR TLC2558CPW TLC2558CPWR TLC2558IDW TLC2558IDWG4 TLC2558IDWR TLC2558IPW TI
Texas Instruments
Description : 5-V, 12-BIT, 400 KSPS, 4/8 CHANNEL, LOW POWER, SERIAL ANALOG-TO-DIGITAL CONVERTERS WITH AUTO POWER DOWN

description
The TLC2558 and TLC2554 are a family of high-performance, 12-BIT LOW POWER, 1.6 µs, CMOS ANALOG-TO-DIGITAL CONVERTERS (ADC) which operate from a single 5 V POWER supply.

● Maximum Throughput 400 KSPS
● Built-In Reference and 8× FIFO
● Differential/Integral Nonlinearity Error:
   ±1 LSB
● Signal-to-Noise and Distortion Ratio:
   69 dB, fi = 12 kHz
● Spurious Free Dynamic Range: 75 dB,
   fi = 12 kHz
● SPI/DSP-Compatible SERIAL Interfaces With
   SCLK up to 20 MHz
● Single Supply 5 Vdc
● Analog Input Range 0 V to Supply Voltage
   With 500 kHz BW
● Hardware Controlled and Programmable
   Sampling Period
LOW Operating Current (4 mA at 5.5 V
   External Ref, 6 mA at 5.5 V, Internal Ref)
POWER Down: Software/Hardware
   POWER-Down Mode (1 µA Max, Ext Ref),
   Auto POWER-Down Mode (1 µA, Ext Ref)
● Programmable Auto-CHANNEL Sweep

View
Part Name(s) : 5962-9957001Q2A TLV2544Q TLV2544QDG4 TLV2544QDR TLV2548M TLV2548MFK TLV2548MFKB TLV2548MJ TLV2548MJB TLV2548Q TLV2548QDW TLV2548QDWG4 TLV2548QDWR TLV2548QDWRG4 V2544QD TLV2544QD TI
Texas Instruments
Description : 3-V TO 5.5-V, 12-BIT, 200-KSPS, 4-/8-CHANNEL, LOW-POWER SERIAL ANALOG-TO-DIGITAL CONVERTERS WITH AUTOPOWER-DOWN

description
The TLV2544Q, TLV2548Q, and TLV2548M are a family of high performance, 12-BIT LOW POWER, 3.5 µs, CMOS ANALOG-TO-DIGITAL CONVERTERS (ADC) which operate from a single 3-V to 5.5-V POWER supply. These devices have three digital inputs and a 3-state output [chip select (CS), SERIAL input-output clock (SCLK), SERIAL data input (SDI), and SERIAL data output (SDO)] that provide a direct 4-wire interface to the SERIAL port of most popular host microprocessors (SPI interface). When interfaced with a DSP, a frame sync (FS) signal is used to indicate the start of a SERIAL data frame.
In addition to a high-speed A/D converter and versatile control capability, these devices have an on-chip analog multiplexer that can select any analog inputs or one of three internal self-test voltages.

● Maximum Throughput 200-KSPS
● Built-In Reference, Conversion Clock and
   8× FIFO
● Differential/Integral Nonlinearity Error:
   ±1.2 LSB at −55°C to 125°C
● Signal-to-Noise and Distortion Ratio:
   65 dB, fi = 12-kHz at −55°C to 125°C
● Spurious Free Dynamic Range: 75 dB,
   fi = 12- kHz
● SPI/DSP-Compatible SERIAL Interfaces With
   SCLK up to 20-MHz
● Single Wide Range Supply 3 Vdc to
   5.5 Vdc
● Analog Input Range 0-V to Supply Voltage
   With 500 kHz BW
● Hardware Controlled and Programmable
   Sampling Period
LOW Operating Current (1-mA at 3.3-V,
   2-mA at 5.5-V With External Ref, 1.7-mA at
   3.3-V, 2.4-mA at 5.5-V With Internal Ref)
POWER Down: Software/Hardware
   POWER-Down Mode (1 µA Typ, Ext Ref),
   AutoPOWER-Down Mode (1 µA Typ, Ext Ref)
● Programmable Auto-CHANNEL Sweep
● Available in Q-Temp Automotive
   High Reliability Automotive Applications
   Configuration Control/Print Support
   Qualification to Automotive Standards

View
Part Name(s) : TLV1504 TLV1504I TLV1504ID TLV1504IPW TLV1504IPWR TLV1508 TLV1508I TLV1508IDW TLV1508IDWG4 TLV1508IPW TLV1508IPWR TY1504 TY1508 TLV1508IDWR Texas-Instruments
Texas Instruments
Description : 2.7 V TO 5.5 V, 10-BIT, 200 KSPS, 4/8 CHANNEL, LOW POWER, SERIAL ANALOG-TO-DIGITAL CONVERTERS WITH AUTO POWER DOWN

description
The TLV1508 and TLV1504 are a family of high performance, 10-bit LOW POWER, 3.86 µs, CMOS ANALOG-TO-DIGITAL CONVERTERS (ADC) which operate from a single 2.7-V to 5.5-V POWER supply. These devices have three digital inputs and a 3-state output [chip select (CS), SERIAL input-output clock (SCLK), SERIAL data input (SDI), and SERIAL data output (SDO)] that provide a direct 4-wire interface to the SERIAL port of most popular host microprocessors (SPI interface). When interfaced with a TMS320 DSP, a frame sync (FS) signal is used to indicate the start of a SERIAL data frame.

● Maximum Throughput 200-KSPS
● Built-In Reference, Conversion Clock and 8× FIFO
● Differential/Integral Nonlinearity Error: ±1 LSB
● Signal-to-Noise and Distortion Ratio: 59 dB, fi = 12-kHz
● Spurious Free Dynamic Range: 72 dB, fi = 12- kHz
● SPI (CPOL = 0, CPHA = 0)/DSP-Compatible SERIAL Interfaces With SCLK up to 20-MHz
● Single Wide Range Supply 2.7 Vdc to 5.5 Vdc
● Analog Input Range 0-V to Supply Voltage With 500 kHz BW
● Hardware Controlled and Programmable Sampling Period
LOW Operating Current (1.0-mA at 3.3-V, 1.1-mA at 5.5-V With External Ref
POWER Down: Software/Hardware POWER-Down Mode (1 µA Max, Ext Ref), AutoPOWER-Down Mode (1 µA, Ext Ref)
● Programmable Auto-CHANNEL Sweep
● Pin Compatible 12-BIT Upgrades Available (TLV2544, TLV2548)

View
Part Name(s) : TLC2551 TLC2551CDGK TLC2551CDGKR TLC2551IDG4 TLC2551IDGK TLC2551IDR TLC2552 TLC2552CDGK TLC2552CDGKR TLC2552IDGK TLC2555 TLC2555CDGK TLC2555IDGK TLC2551ID TLC2552ID TLC2555ID Texas-Instruments
Texas Instruments
Description : 5-V, LOW-POWER, 12-BIT, 175/360 KSPS, SERIAL ANALOG-TO-DIGITAL CONVERTERS WITH AUTOPOWER DOWN

description
The TLC2551, TLC2552, and TLC2555 are a family of high performance, 12-BIT, LOW-POWER, miniature, CMOS ANALOG-TO-DIGITAL CONVERTERS (ADC). The TLC255x family uses a 5-V supply. Devices are available with single, dual, or single pseudo-differential inputs. Each device has a chip select (CS), SERIAL clock (SCLK), and SERIAL data output (SDO) that provides a direct 3-wire interface to the SERIAL port of most popular host microprocessors (SPI interface). When interfaced with a TMS320 DSP, a frame sync signal (FS) can be used to indicate the start of a SERIAL data frame on CS for all devices or on FS for the TLC2551.

● Maximum Throughput . . . 175/360 KSPS
● INL/DNL: ±1 LSB Max, SINAD: 72 dB, SFDR: 85 dB, fi = 20 kHz
● SPI/DSP-Compatible SERIAL Interface
● Single 5-V Supply
● Rail-to-Rail Analog Input With 500 kHz BW
● Three Options Available:
    – TLC2551: Single CHANNEL Input
    – TLC2552: Dual CHANNELs With Autosweep
    – TLC2555: Single CHANNEL With Pseudo-Differential Input
LOW POWER With AutoPOWER Down
    – Operating Current: 3.5 mA AutoPOWER Down: 8 µA
● Small 8-Pin MSOP and SOIC Packages


View
Part Name(s) : TLV2544 TLV2544CD TLV2544CDR TLV2544CPW TLV2544CPWR TLV2544ID TLV2544IDG4 TLV2544IDR TLV2544IPW TLV2544IPWG4 TLV2544IPWR TLV2548 TLV2548CDW TLV2548CDWG4 TLV2548CDWR TLV2548CDWRG4 TLV2548CPW TLV2548CPWG4 TLV2548CPWR TLV2548CPWRG4 TLV2548IDW TLV2548IDWG4 TLV2548IDWR TLV2548IPW TLV2548IPWG4 TI
Texas Instruments
Description : 2.7-V TO 5.5-V, 12-BIT, 200-KSPS, 4-/8-CHANNEL, LOW-POWER SERIAL ANALOG-TO-DIGITAL CONVERTERS WITH AUTOPOWER-DOWN

description
The TLV2548 and TLV2544 are a family of high performance, 12-BIT LOW POWER, 3.86 µs, CMOS ANALOG-TO-DIGITAL CONVERTERS (ADC) which operate from a single 2.7-V to 5.5-V POWER supply. These devices have three digital inputs and a 3-state output [chip select (CS), SERIAL input-output clock (SCLK), SERIAL data input (SDI), and SERIAL data output (SDO)] that provide a direct 4-wire interface to the SERIAL port of most popular host microprocessors (SPI interface). When interfaced with a TI DSP, a frame sync (FS) signal is used to indicate the start of a SERIAL data frame.

Maximum Throughput 200-KSPS
Built-In Reference, Conversion Clock and 8×FIFO
Differential/Integral Nonlinearity Error: ±1 LSB
Signal-to-Noise and Distortion Ratio: 70 dB, fi= 12-kHz
Spurious Free Dynamic Range: 75 dB, fi= 12- kHz
SPI (CPOL = 0, CPHA = 0)/DSP-Compatible
  SERIAL Interfaces With SCLK up to 20-MHz
Single Wide Range Supply 2.7 Vdc to 5.5 Vdc
Analog Input Range 0-V to Supply Voltage With 500 kHz BW
Hardware Controlled and Programmable Sampling Period
LOW Operating Current (1.0-mA at 3.3-V, 1.1-mA at 5.5-V With External Ref
POWER Down: Software/Hardware POWER-Down Mode (1µA Max, Ext Ref), AutoPOWER-Down Mode (1µA, Ext Ref)
Programmable Auto-CHANNEL Sweep

 

 

View
Part Name(s) : TLV1504 TLV1504I TLV1504ID TLV1504IDG4 TLV1504IPW TLV1504IPWG4 TLV1504IPWR TLV1504IPWRG4 TLV1508 TLV1508I TLV1508IDW TLV1508IDWG4 TLV1508IDWR TLV1508IPW TLV1508IPWG4 TLV1508IPWR TLV1508IPWRG4 TY1504 TY1508 TLV1504IDR TI
Texas Instruments
Description : 2.7 V TO 5.5 V, 10-BIT, 200 KSPS, 4/8 CHANNEL, LOW POWER, SERIAL ANALOG-TO-DIGITAL CONVERTERS WITH AUTO POWER DOWN

description
The TLV1508 and TLV1504 are a family of high performance, 10-bit LOW POWER, 3.86 µs, CMOS ANALOG-TO-DIGITAL CONVERTERS (ADC) which operate from a single 2.7-V to 5.5-V POWER supply. These devices have three digital inputs and a 3-state output [chip select (CS), SERIAL input-output clock (SCLK), SERIAL data input (SDI), and SERIAL data output (SDO)] that provide a direct 4-wire interface to the SERIAL port of most popular host microprocessors (SPI interface). When interfaced with a TMS320 DSP, a frame sync (FS) signal is used to indicate the start of a SERIAL data frame.

● Maximum Throughput 200-KSPS
● Built-In Reference, Conversion Clock and 8× FIFO
● Differential/Integral Nonlinearity Error: ±1 LSB
● Signal-to-Noise and Distortion Ratio: 59 dB, fi = 12-kHz
● Spurious Free Dynamic Range: 72 dB, fi = 12- kHz
● SPI (CPOL = 0, CPHA = 0)/DSP-Compatible SERIAL Interfaces With SCLK up to 20-MHz
● Single Wide Range Supply 2.7 Vdc to 5.5 Vdc
● Analog Input Range 0-V to Supply Voltage With 500 kHz BW
● Hardware Controlled and Programmable Sampling Period
LOW Operating Current (1.0-mA at 3.3-V, 1.1-mA at 5.5-V With External Ref
POWER Down: Software/Hardware POWER-Down Mode (1 µA Max, Ext Ref), AutoPOWER-Down Mode (1 µA, Ext Ref)
● Programmable Auto-CHANNEL Sweep
● Pin Compatible 12-BIT Upgrades Available (TLV2544, TLV2548)

View
Part Name(s) : TLV2541 TLV2541CDGKG4 TLV2541CDGKR TLV2541ID TLV2541IDG4 TLV2541IDGKG4 TLV2541IDGKR TLV2541IDR TLV2542 TLV2542CDGKG4 TLV2542CDGKR TLV2542ID TLV2542IDG4 TLV2542IDGKG4 TLV2542IDGKR TLV2542IDR TLV2545 TLV2545ID TLV2541CDGK TLV2542CDGK TLV2545CDGK TLV2541IDGK TLV2542IDGK TLV2545IDGK Texas-Instruments
Texas Instruments
Description : 2.7-V TO 5.5-V, LOW-POWER, 12-BIT, 140/200 KSPS, SERIAL ANALOG-TO-DIGITAL CONVERTERS WITH AUTOPOWER DOWN

description
The TLV2541, TLV2542, and TLV2545 are a family of high performance, 12-BIT, LOW POWER, miniature, CMOS ANALOG-TO-DIGITAL CONVERTERS (ADC).

● Maximum Throughput . . . 140/200 KSPS
● Built-In Conversion Clock
● INL/DNL: ±1 LSB Max, SINAD: 72 dB,
   SFDR: 85 dB, fi = 20 kHz
● SPI/DSP-Compatible SERIAL Interface
● Single Supply: 2.7 Vdc to 5.5 Vdc
● Rail-to-Rail Analog Input With 500 kHz BW
● Three Options Available:
   − TLV2541: Single CHANNEL Input
   − TLV2542: Dual CHANNELs With Autosweep
   − TLV2545: Single CHANNEL With Pseudo-Differential Input
LOW POWER With AutoPOWER Down
   − Operating Current: 1 mA at 2.7 V, 1.5 mA at 5 V
      AutoPOWER Down: 2 μA at 2.7 V, 5 μA at 5 V
● Small 8-Pin MSOP and SOIC Packages

View

1

2345678910 Next

 

All Rights Reserved © datasheetbank.com 2014 - 2019 [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]