datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

P/N + Description + Content Search

Search Word's :
Description : WS Series Hot-Molded Carbon Composition Potentiometer

Features
■ Carbon composition/Industrial/Sealed
■ Locking-Bushing/Standard-Bushing
■ Meet MIL-R-94

Description : WS Series Hot-Molded Carbon Composition Potentiometer

[Sharma]

Features
■ Carbon composition/Industrial/Sealed
■ Locking-Bushing/Standard-Bushing
■ Meet MIL-R-94

Description : 50-60W Isolated Wide-Range DC/DC Converters

PRODUCT OVERVIEW
Wide range 4:1 inputs on the 1.50" x 1.90" x 0.38" converter are either 9 to 36 Volts DC (Q12 models) or 18 to 75 Volts DC (Q48 models), ideal for battery-powered and telecom equipment. Fixed output voltages from 3.3 VDC to 15 VDC are regulated to within ±0.05% and may be trimmed within ±10% of nominal output. Applications nclude small instruments, computer-based systems, data communications equipment, remote sensor systems, vehicle and portable electronics.

FEATURES
Small footprint DC/DC converter, ideal for high current applications
Industry standard 1.50˝ x 1.90˝ x 0.38˝ open frame package and pinout
Wide range input voltages 9-36 and 18-75Vdc
Assembly and attachment for RoHS standards
Isolation up to 2250 VDC (basic)
Up to 50-60W total output power with overtemperature shutdown
High effi ciency synchronous rectifi er forward topology
Stable no-lead operation with no required external components
–40 to +85°C temperature range with derating
Designed to meet UL60950-1, CSA-C22.2 No. 234, EN60950-1 safety approvals
Extensive self-protection shut down features
RoHS6 compliant

Description : ASCEND Semiconductor 4Mx4 EDO

Description
The device CMOS Dynamic RAM organized as 4,194,304 words x 4 bits with extended data out access mode. It is fabricated with an advanced submicron CMOS technology and designed to operate from a single 3.3V oniy power supply. Low voltage operation is more suitable to be used on battery backup, portable electronic application. lt is packaged in JEDEC standard 26/24-pin plastic SOJ or TSOP(II).

Features
• Single 3.3V(±10%) only power supply
• High speed tRAC acess time: 50/60ns
• Low power dissipation
   - Active mode : 432/396 mW (Mas)
   - Standby mode: 0.54 mW (Mas)
• Extended - data - out(EDO) page mode access
• I/O level: CMOS level (Vcc = 3.3V)
• 2048 refresh cycle in 32 ms(Std.) or 128 ms(S-version)
• 4 refresh modesh:
   - RAS only refresh
   - CAS - before - RAS refresh
   - Hidden refresh
   - Self-refresh(S-version)

Description : Transient Voltage Suppressor 11 to 170 Volts 5000 Watt

Features
• For surface mount application in order to optimize board space
• Low inductance
• Low profile package
• Built-in strain relief
• Glass passivated junction
• Excellent clamping capability
• Repetition Rate( duty cycle): 0.01%
• Fast response time: typical less than 1ps from 0V to BV min
• Typical ID less than 1uA above 10V
• High temperature soldering: 250oC/10 seconds at terminals
• Plastic package has Underwrites Laboratory Flammability Classification 94V-O
• UL Recognized File # E222849

Description : 82CXX / VOLTAGE DETECTORS

The UTC 82CXX series are good performance 3-terminals voltage detectors and manufactured by CMOS technologies with highly accurate, low power consumption.

The detection voltage is extremely accurate with minimal temperature drift. 

FEATURES
*High-accuracy detection voltage : ±2%
*Detect voltage range : 0.9V to 6.2V in 0.1V increments
*Detect voltage temperature characteristics: TYP.±100ppm/°С.
*Wide operating voltage range : 0.7V to 10.0V
*Low current consumption : TYP 0.7μA(at VIN=1.5V)

Description : 3000W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Features
● Glass Passivated Die Construction
● 3000W Peak Pulse Power Dissipation
● 5.0V – 170V Standoff Voltage
● Uni- and Bi-Directional Versions Available
● Excellent Clamping Capability
● Fast Response Time
● Plastic Case Material has UL Flammability Classification Rating 94V-O

Description : 3000W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSORS

Features
●  Glass Passivated Die Construction
●  3000W Peak Pulse Power Dissipation
●  5.0V – 170V Standoff Voltage
●  Uni- and Bi-Directional Versions Available
●  Excellent Clamping Capability
●  Fast Response Time
●  Plastic Case Material has UL Flammability
● lassification Rating 94V-O

Description : Mod IV Receptacle Assemblies, Single-Row, Outrigger Design .100 x .100 [2.54 x 2.54] Centerline, End To End Stackable

Mod IV Receptacle Assemblies, Single-Row, Outrigger Design .100 x .100 [2.54 x 2.54] Centerline, End To End Stackable

Description : SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR PEAK PULSE POWER 3000 Watts

FEATURES
• For surface mounted applications in order to optimize board space.
• Low profile package
• Built-in strain relief
• Glass passivated junction
• Low inductance
• Typical ID less than 1.0µA above 10V
• Plastic package has Underwriters Laboratory Flammability Classification 94V-O
• High temperature soldering : 260°C /10 seconds at terminals
• In compliance with EU RoHS 2002/95/EC directives

12345678910 Next

All Rights Reserved© datasheetbank.com  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]