datasheetbank_Logo     Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

P/N + Description + Content Search

Search Words :

Part Name(s) : LMH0303SQX/NOPB TI
Texas Instruments
Description : 3 Gbps HD/SD SDI CABLE DRIVER WITH CABLE DETECT View

DESCRIPTION
The LMH0303 3 Gbps HD/SD SDI CABLE DRIVER WITH CABLE DETECT is designed for use in SMPTE 424M, SMPTE 292M, SMPTE 344M, and SMPTE 259M serial digital video applications. The LMH0303 drives 75Ω transmission lines (Belden 1694A, Belden 8281, or equivalent) at data rates up to 2.97 Gbps.
The LMH0303 includes intelligent sensing capabilities to improve system diagnostics. The CABLE DETECT feature senses near-end termination to determine if a CABLE is correctly attached to the output BNC. Input loss of signal (LOS) DETECTs the presence of a valid signal at the input of the CABLE DRIVER. These sensing features may be used to alert the user of a system fault and activate a deep power save mode, reducing the CABLE DRIVERs power consumption to 4 mW. These features are accessible via an SMBus interface.
The LMH0303 provides two selectable slew rates for SMPTE 259M and SMPTE 424M / 292M compliance. The output amplitude is adjustable ±10% in 5 mV steps via the SMBus.
The LMH0303 is powered from a single 3.3V supply. Power consumption is typically 130 mW in SD mode and 155 mW in HD mode. The LMH0303 is available in a 16-pin WQFN package.

FEATURES
• SMPTE 424M, SMPTE 292M, SMPTE 344M, and
   SMPTE 259M Compliant
• Data Rates to 2.97 Gbps
• Supports DVB-ASI at 270 Mbps
CABLE DETECT on Output
• Loss of Signal DETECT at Input
• Output DRIVER Power Down Control
• Typical Power Consumption: 130 mW in SD
   Mode and 155 mW in HD Mode
• Power Save Mode Typical Power
   Consumption: 4 mW
• Single 3.3V Supply Operation
• Differential Input
• 75Ω Differential Output
• Selectable Slew Rate
• Industrial Temperature Range: −40°C to +85°C
• 16-pin WQFN Package
• Footprint Compatible WITH the LMH0302

APPLICATIONS
• SMPTE 424M, SMPTE 292M, SMPTE 344M, and
   SMPTE 259M Serial Digital Interfaces
• Digital Video Routers and Switches
• Distribution Amplifiers

Part Name(s) : LMH0307 LMH0307GRE/NOPB LMH0307SQ/NOPB LMH0307SQE/NOPB LMH0307SQX/NOPB Texas-Instruments
Texas Instruments
Description : 3 Gbps HD/SD SDI Dual Output CABLE DRIVER WITH CABLE DETECT View

DESCRIPTION
The LMH0307 3 Gbps HD/SD SDI Dual Output CABLE DRIVER WITH CABLE DETECT is designed for use in SMPTE 424M, SMPTE 292M, SMPTE 344M, and SMPTE 259M serial digital video applications. The LMH0307 implements two complementary output DRIVERs and drives 75Ω transmission lines (Belden 1694A, Belden 8281, or equivalent) at data rates up to 2.97 Gbps.
The LMH0307 includes intelligent sensing capabilities to improve system diagnostics. The CABLE DETECT feature senses near-end termination to determine if a CABLE is correctly attached to the output BNC. Input loss of signal (LOS) DETECTs the presence of a valid signal at the input of the CABLE DRIVER. These sensing features may be used to alert the user of a system fault and activate a deep power save mode, reducing the CABLE DRIVERs power consumption to 4 mW. These features are accessible via an SMBus interface.
The LMH0307 provides two selectable slew rates for SMPTE 259M and SMPTE 424M / 292M compliance. The output amplitude is adjustable ±10% in 5 mV steps via the SMBus.
The LMH0307 is powered from a single 3.3V supply. Power consumption is typically 230 mW in SD mode and 275 mW in HD mode. The LMH0307 is available in two space-saving packages: a 4 x 4 mm 16-pin WQFN and even more space-efficient 3 x 3 mm 25- ball CS-BGA package.

FEATURES
• SMPTE 424M, SMPTE 292M, SMPTE 344M, and
   SMPTE 259M Compliant
• Data Rates to 2.97 Gbps
• Supports DVB-ASI at 270 Mbps
CABLE DETECT on Output
• Loss of Signal DETECT at Input
• Output DRIVER Power Down Control
• Typical Power Consumption: 230 mW in SD
   Mode and 275 mW in HD Mode
• Power Save Mode Typical Power
   Consumption: 4 mW
• Single 3.3V Supply Operation
• Differential Input
• Dual Complementary 75Ω Outputs
• Selectable Slew Rate
• Industrial Temperature Range: −40°C to +85°C
• 16-Pin WQFN or 25-Ball CS-BGA package

APPLICATIONS
• SMPTE 424M, SMPTE 292M, SMPTE 344M, and
   SMPTE 259M Serial Digital Interfaces
• Digital Video Routers and Switches
• Distribution Amplifiers

Part Name(s) : LMH0307 LMH0307GR/NOPB LMH0307GRE/NOPB LMH0307GRX/NOPB LMH0307SQ/NOPB LMH0307SQE/NOPB LMH0307SQX/NOPB TI
Texas Instruments
Description : 3 Gbps HD/SD SDI Dual Output CABLE DRIVER WITH CABLE DETECT View

DESCRIPTION
The LMH0307 3 Gbps HD/SD SDI Dual Output CABLE DRIVER WITH CABLE DETECT is designed for use in SMPTE 424M, SMPTE 292M, SMPTE 344M, and SMPTE 259M serial digital video applications. The LMH0307 implements two complementary output DRIVERs and drives 75Ω transmission lines (Belden 1694A, Belden 8281, or equivalent) at data rates up to 2.97 Gbps.
The LMH0307 includes intelligent sensing capabilities to improve system diagnostics. The CABLE DETECT feature senses near-end termination to determine if a CABLE is correctly attached to the output BNC. Input loss of signal (LOS) DETECTs the presence of a valid signal at the input of the CABLE DRIVER. These sensing features may be used to alert the user of a system fault and activate a deep power save mode, reducing the CABLE DRIVERs power consumption to 4 mW. These features are accessible via an SMBus interface.
The LMH0307 provides two selectable slew rates for SMPTE 259M and SMPTE 424M / 292M compliance. The output amplitude is adjustable ±10% in 5 mV steps via the SMBus.
The LMH0307 is powered from a single 3.3V supply. Power consumption is typically 230 mW in SD mode and 275 mW in HD mode. The LMH0307 is available in two space-saving packages: a 4 x 4 mm 16-pin WQFN and even more space-efficient 3 x 3 mm 25-ball CS-BGA package.

FEATURES
• SMPTE 424M, SMPTE 292M, SMPTE 344M, and
   SMPTE 259M Compliant
• Data Rates to 2.97 Gbps
• Supports DVB-ASI at 270 Mbps
CABLE DETECT on Output
• Loss of Signal DETECT at Input
• Output DRIVER Power Down Control
• Typical Power Consumption: 230 mW in SD
   Mode and 275 mW in HD Mode
• Power Save Mode Typical Power
   Consumption: 4 mW
• Single 3.3V Supply Operation
• Differential Input
• Dual Complementary 75Ω Outputs
• Selectable Slew Rate
• Industrial Temperature Range: −40°C to +85°C
• 16-Pin WQFN or 25-Ball CS-BGA package

APPLICATIONS
• SMPTE 424M, SMPTE 292M, SMPTE 344M, and
   SMPTE 259M Serial Digital Interfaces
• Digital Video Routers and Switches
• Distribution Amplifiers

Part Name(s) : LMH0303 LMH0303SQX/NOPB LMH0303SQ/NOPB LMH0303SQE/NOPB TI
Texas Instruments
Description : 3-GBPS HD/SD SDI CABLE DRIVER WITH CABLE DETECT View

Description
The LMH0303 device is designed for use in ST 424, ST 292, ST 344, and ST 259 serial digital video applications. The LMH0303 drives 75-Ω transmission lines (Belden 1694A, Belden 8281, or equivalent) at data rates up to 2.97 Gbps.
The LMH0303 includes intelligent sensing capabilities to improve system diagnostics. The CABLE DETECT feature senses near-end termination to determine if a CABLE is correctly attached to the output BNC. Input loss of signal (LOS) DETECTs the presence of a valid signal at the input of the CABLE DRIVER. These sensing features may be used to alert the user of a system fault and activate a deep power-save mode, reducing the power consumption of the CABLE DRIVER to 4 mW. These features are accessible through an SMBus interface.
The LMH0303 provides two selectable slew rates for ST 259 and ST 424 or 292. The output amplitude is adjustable ±10% in 5-mV steps through the SMBus. The LMH0303 is powered from a single 3.3-V supply. Power consumption is typically 130 mW in SD mode and 155 mW in HD mode. The LMH0303 is available in a 16-pin WQFN package.

Features
• Supports ST 424 (3G), 292 (HD), and 259 (SD)
• Data Rates up to 2.97 Gbps
• Supports DVB-ASI at 270 Mbps
CABLE DETECT on Output
• Loss of Signal DETECT at Input
• Output DRIVER Power-Down Control
• Typical Power Consumption: 130 mW in SD Mode
   and 155 mW in HD Mode
• Typical Power Consumption of the Power-Save
   Mode: 4 mW
• Single 3.3-V Supply Operation
• 75-Ω Single-Ended Outputs
• 100-Ω Differential Input
• Selectable Slew Rate
• Industrial Temperature Range: −40°C to 85°C
• 16-Pin WQFN Package
• Footprint Compatible WITH the LMH0302

Applications
• ST 424, ST 292, ST 344, and ST 259 Serial
   Digital Interfaces
• Digital Video Routers and Switches
• Distribution Amplifiers


Part Name(s) : GS9077 GS9077CNE3 Gennum
Gennum -> Semtech
Description : HD-LINX III SD-SDI CABLE DRIVER View

Description
The GS9077 is a high-speed BiCMOS integrated circuit designed to drive one or two 75Ω co-axial CABLEs.
The GS9077 may drive data rates up to 540Mb/s and provides a disable pin that may be used to power down the output stage.
The GS9077 accepts a LVPECL level differential input that may be AC coupled. External biasing resistors at the inputs are not required.
Power consumption is typically 168mW using a 3.3V power supply. The GS9077 is Pb-free, and the encapsulation compound does not contain halogenated flame retardant.
This component and all homogeneous subcomponents are RoHS compliant.

Features
• SMPTE 344M and SMPTE 259M compliant
• Dual coaxial CABLE driving outputs
• Selectable power down mode
• 50Ω differential PECL input
• Pb-free and RoHS compliant
• Seamless interface to other HD-LINX® III family products
• Single 3.3V power supply operation
• Operating temperature range: 0°C to 70°C

Applications
• SMPTE 344M and SMPTE 259M Coaxial CABLE Serial Digital Interfaces.

Part Name(s) : GS9060 GS9060-CF GS9060-CFE3 Gennum
Gennum -> Semtech
Description : HD-LINX II SD-SDI and DVB-ASI Deserializer WITH Loop-Through CABLE DRIVER View

Description
The GS9060 is a reclocking deserializer WITH a serial loop-through CABLE DRIVER. When used in conjunction WITH any Gennum CABLE equalizer and the GO1555/GO1525* Voltage Controlled Oscillator, a received solution can be realized for SD-SDI and DVB-ASI applications.
In addition to reclocking an deserializing the input data stream, the GS9060 performs NRZI-to-NRZ decoding, descrambling as per SMPTE 259M-C, and word alignment when operating in SMPTE mode. When operating in DVB-ASI mode, the device will word align the data to K28.5 sync characters and 8b/10b decode the received stream.

Key Features
• SMPTE 259M-C compliant descrambling and NRZI → NRZ decoding (WITH bypass)
• DVB-ASI sync word DETECTion and 8b/10b decoding
• serial loop-through CABLE DRIVER output selectable as reclocked or non-reclocked
• dual serial digital input buffers WITH 2 x 1 mux
• integrated serial digital signal termination
• integrated reclocker
• descrambler bypass option
• adjustable loop bandwidth
• user selectable additional processing features including:
    • TRS, ANC data checksum and EDH CRC error DETECTion and correction
    • programmable ANC data DETECTion
    • illegal code remapping
• internal flywheel for noise immune H, V, F extraction
• FIFO load Pulse
• 20-bit / 10-bit CMOS parallel output data bus
• 27MHz / 13.5MHz parallel digital output
• automatic standards DETECTion and indication
• Pb-free and RoHS compliant
• 1.8V core power supply and 3.3V charge pump power supply
• 3.3V digital I/O supply
• JTAG test interface
• small footprint compatible WITH GS1560A, GS1561, GS1532, and GS9062

Applications
• SMPTE 259M-C Serial Digital Interfaces
• DVB-ASI Serial Digital Interfaces

Part Name(s) : GS1559 GS1559-CBE2 GS1559-CB GS1559 GS1559-CBE2 GS1559-CB Gennum
Gennum -> Semtech
Description : HD-LINX? II Multi-Rate Deserializer WITH Loop-Through CABLE DRIVER View

Description
The GS1559 is a reclocking deserializer WITH a serial loop-through CABLE DRIVER. When used in conjunction WITH the GS1574 Automatic CABLE Equalizer and the GO1525 Voltage Controlled Oscillator, a receive solution can be realized for HD-SDI, SD-SDI and DVB-ASI applications.

Key Features
• SMPTE 292M and SMPTE 259M-C compliant descrambling and NRZI → NRZ decoding (WITH bypass)
• DVB-ASI sync word DETECTion and 8b/10b decoding
• auto-configuration for HD-SDI, SD-SDI and DVB-ASI
• serial loop-through CABLE DRIVER output selectable as reclocked or non-reclocked
• dual serial digital input buffers WITH 2 x 1 mux
• integrated serial digital signal termination
• integrated reclocker
• automatic or manual rate selection / indication (HD/SD)
• descrambler bypass option
• user selectable additional processing features including:
    • CRC, TRS, ANC data checksum, line number and EDH CRC error DETECTion and correction
    • programmable ANC data DETECTion
    • illegal code remapping
• internal flywheel for noise immune H, V, F extraction
• FIFO load Pulse
• 20-bit / 10-bit CMOS parallel output data bus
• 148.5MHz / 74.25MHz / 27MHz / 13.5MHz parallel digital output
• automatic standards DETECTion and indication
• 1.8V core power supply and 3.3V charge pump power supply
• 3.3V digital I/O supply
• JTAG test interface
• Available in a Pb-free package
• small footprint (11mm x 11mm)

Applications
• SMPTE 292M Serial Digital Interfaces
• SMPTE 259M-C Serial Digital Interfaces
• DVB-ASI Serial Digital Interfaces

Part Name(s) : MAX11506 MAX11506CEE MAX11507 MAX11507CEE MAX11506CEE+ MAX11507CEE+ MaximIC
Maxim Integrated
Description : Low-Cost, 6-Channel SD Plus HD/SD Selectable Video Filters and Buffers View

General Description
The MAX11506/MAX11507 integrated filters offer six channels, three for standard-definition (SD) video and three for either SD or high-definition (HD) video, and include +6dB output buffers on each channel. These video filters are ideal for anti-aliasing and DAC smoothing in applications such as set-top boxes, digital video recorders, DVD players, and personal video recorders.

Features
♦ Three Selectable 6th-Order 9MHz/33MHz
   (SD/HD) Filters
♦ Three Fixed 5th-Order 9MHz (SD) Filters
♦ +6dB Output Buffers
♦ Transparent Input Clamp
♦ AC- or DC-Coupled Inputs
♦ AC- or DC-Coupled Outputs
♦ 0.8dB Peaking Passband Response
   (MAX11507) on Three SD-Only Channels
♦ Output Buffers Drive a Standard 150Ω Video
   Load
♦ Single +5V Power Supply
♦ Lead-Free 16-Pin QSOP Package

Applications
   CABLE and Satellite Set-Top Box Receivers
   HDTVs
   DVD Players
   Personal Video Recorders
   Digital Video Recorders (DVRs)
   SDTVs
   Video On-Demand
   HD Recorders

Part Name(s) : GS9064 GS9064-CKD GS9064-CKDE3 Gennum
Gennum -> Semtech
Description : SD SDI Adaptive CABLE Equalizer View

DESCRIPTION
The GS9064 is a second-generation high-speed bipolar integrated circuit designed to equalize and restore signals received over 75Ω co-axial CABLE at data rates from 143Mb/s up to 540Mb/s. The GS9064 is designed to support SMPTE 344M and SMPTE 259M and is optimized for performance at 270Mb/s.

KEY FEATURES
• SMPTE 259 and SMPTE 344 compliant
• automatic CABLE equalization
• supports DVB-ASI at 270Mb/s
• typical maximum equalized length of Belden 1694A CABLE at 270Mb/s is 350m
• 50Ω differential output (WITH internal 50Ω pull-ups)
CABLE length indicator
• output mute based on maximum CABLE length adjust or manual override
• Pb-free and Green
• single 3.3V power supply operation
• operating temperature range: 0°C to +70°C
• pin compatible WITH HDLINX™ II GS1524 multirate SDI adaptive CABLE equalizer

APPLICATIONS
• SMPTE 259M Coaxial CABLE Serial Digital Interfaces

1

2345678910 Next

All Rights Reserved © datasheetbank.com 2014 - 2019 [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]