datasheetbank_Logo    Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site
Part Name  

P/N + Description + Content Search

Search Words :

Part Name(s) : PI5C3383 PI5C3383L PI5C3383LE PI5C3383Q PI5C3383QE PI5C3383S PI5C3383SE Pericom-Semiconductor
Pericom Semiconductor
Description : 5-Bit, 4-Port BUS EXCHANGE SWITCH

Description
The PI5C3383 is a 5-bit, 4-port BUS SWITCH with EXCHANGE designed with a low On-Resistance allowing inputs to be connected directly to outputs. The SWITCH creates no additional propagational delay or additional ground bounce noise. The SWITCH is turned ON by the BUS Enable (BE) input signal, and the BUS EXCHANGE (BX) input signal offers nibble swapping of the AB and CD pairs of signals. This EXCHANGE confguration allows byte swapping of BUSes in systems. It can also be used as a quad 2-to-1 multiplexer and to create low delay barrel shifters, etc.

Features
• Near-Zero propagation delay
• 5Ω SWITCHes connect inputs to outputs
• Direct BUS connection when SWITCHes are ON
• Ultra-low quiescent power (0.2µA typical)
   – Ideally suited for notebook applications
• Packaging (Pb-free & Green available):
   – 24-pin 173-mil wide plastic TSSOP (L)
   – 24-pin 150-mil wide plastic QSOP (Q)
   – 24-pin 300-mil wide plastic SOIC (S)

View
Part Name(s) : IDT74CBTLV16212 IDT74CBTLV16212PA IDT74CBTLV16212PAG IDT74CBTLV16212PF IDT74CBTLV16212PV IDT
Integrated Device Technology
Description : LOW-VOLTAGE 24-BIT BUS EXCHANGE SWITCH

DESCRIPTION:
The CBTLV16212 provides a set of 24 high-speed SWITCHes for BUS exchanging and SWITCHing. The device has low ON resistance, resulting in under 250ps propagation delay through the SWITCH. The CBTLV16212 operates as a single 24-BIT BUS SWITCH or as a 12-bit BUS EXCHANGEr, which provides data exchanging between the four signal ports through the data select (S0-S2) pins.
The CBTLV16212 has the break-before-make feature, which allows zero current when SWITCHing between ports B1 and B2.

FEATURES:
• 5Ω A/B bi-directional SWITCH
• Isolation Under Power-Off Conditions
• Over-voltage tolerant
• Latch-up performance exceeds 100mA
• VCC = 2.3V - 3.6V, normal range
• ESD >2000V per MIL-STD-883, Method 3015; >200V using machine model (C = 200pF, R = 0)
• Available in SSOP, TSSOP, and TVSOP packages

APPLICATIONS:
• 3.3V High Speed BUS SWITCHing and BUS Isolation

 

View
Part Name(s) : FST16213 FST16213MEA FST16213MEAX FST16213MTD FST16213MTDX Fairchild
Fairchild Semiconductor
Description : 24-BIT BUS EXCHANGE SWITCH

General Description
The Fairchild SWITCH FST16213 provides 24-BITs of high speed CMOS TTL-compatible BUS SWITCHing or exchanging. The low on resistance of the SWITCH allows inputs to be connected to outputs without adding propagation delay or
generating additional ground bounce noise.

Features
■4Ω SWITCH connection between two ports.
■Minimal propagation delay through the SWITCH.
■Low lCC.
■Zero bounce in flow-through mode.
■Control inputs compatible with TTL level.

View
Part Name(s) : 74CBTLV16212DLG4 74CBTLV16212DLRG4 74CBTLV16212GRE4 74CBTLV16212VRE4 SN74CBTLV16212 SN74CBTLV16212DGG SN74CBTLV16212DGV SN74CBTLV16212DL SN74CBTLV16212DLR SN74CBTLV16212GR SN74CBTLV16212VR TI
Texas Instruments
Description : LOW-VOLTAGE 24-BIT FET BUS-EXCHANGE SWITCH

description
The SN74CBTLV16212 provides 24 bits of high-speed BUS SWITCHing or exchanging. The low on-state resistance of the SWITCH allows connections to be made with minimal propagation delay.
The device operates as a 24-BIT BUS SWITCH or a 12-bit BUS EXCHANGEr, which provides data exchanging between the four signal ports via the data-select (S0, S1, S2) terminals.The SN74CBTLV16212 is specified by the break-before-make feature to have no through current when SWITCHing between B ports. The SN74CBTLV16212 is characterized for operation from –40°C to 85°C.

4-Ω SWITCH Connection Between Two Ports
Isolation Under Power-Off Conditions
Break-Before-Make Feature
ESD Protection Exceeds 2000 V Per MIL-STD-883, Method 3015; Exceeds 200 V Using Machine Model (C = 200 pF, R = 0)
Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
Package Options Include Plastic Thin Shrink Small-Outline (DGG), Thin Very Small-Outline (DGV), and 300-mil Shrink Small-Outline (DL) Packages

 

View
Part Name(s) : 74CBTLV16212DLG4 74CBTLV16212DLRG4 74CBTLV16212GRE4 74CBTLV16212VRE4 SN74CBTLV16212 SN74CBTLV16212DGG SN74CBTLV16212DGGR SN74CBTLV16212DGV SN74CBTLV16212DL SN74CBTLV16212DLR SN74CBTLV16212GR SN74CBTLV16212VR Texas-Instruments
Texas Instruments
Description : LOW-VOLTAGE 24-BIT FET BUS-EXCHANGE SWITCH

description
The SN74CBTLV16212 provides 24 bits of high-speed BUS SWITCHing or exchanging. The low on-state resistance of the SWITCH allows connections to be made with minimal propagation delay.
The device operates as a 24-BIT BUS SWITCH or a 12-bit BUS EXCHANGEr, which provides data exchanging between the four signal ports via the data-select (S0, S1, S2) terminals.The SN74CBTLV16212 is specified by the break-before-make feature to have no through current when SWITCHing between B ports. The SN74CBTLV16212 is characterized for operation from –40°C to 85°C.

4-Ω SWITCH Connection Between Two Ports
Isolation Under Power-Off Conditions
Break-Before-Make Feature
ESD Protection Exceeds 2000 V Per MIL-STD-883, Method 3015; Exceeds 200 V Using Machine Model (C = 200 pF, R = 0)
Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
Package Options Include Plastic Thin Shrink Small-Outline (DGG), Thin Very Small-Outline (DGV), and 300-mil Shrink Small-Outline (DL) Packages

 

View
Part Name(s) : IDT74FST163212PA IDT74FST163212PF IDT74FST163212PV IDT74FST163212 IDT
Integrated Device Technology
Description : 24-BIT BUS EXCHANGE SWITCH

DESCRIPTION:
The FST163212 belongs to IDTs family of BUS SWITCHes. BUS SWITCH devices perform the function of connecting or isolating two ports without providing any inherent current sink or source capability. Thus they generate little or no noise of their own while providing a low resistance path for an external driver. These devices connect input and output ports through an n-channel FET. When the gate-to-source junction of this FET is adequately forward-biased the device conducts and the resistance between input and output ports is small. With out adequate bias on the gate-to-source junction of the FET, the FET is turned off, therefore with no VCC applied, the device has hot insertion capability.

FEATURES:
BUS SWITCHes provide zero delay paths
• Extended commercial range of –40°C to +85°C
• Low SWITCH on-resistance: FST163xxx – 4Ω
• TTL-compatible input and output levels
• ESD > 2000V per MIL-STD-883, Method 3015; > 200V using machine model (C = 200pF, R = 0)
• Available in SSOP, TSSOP and TVSOP

View
Part Name(s) : IDT74FST16163213PA IDT74FST16163213PF IDT74FST16163213PV IDT74FST163213 IDT74FST163213PA IDT74FST163213PF IDT74FST163213PV IDT
Integrated Device Technology
Description : 24-BIT BUS EXCHANGE SWITCH

DESCRIPTION:
The FST163213 belongs to IDTs family of BUS SWITCHes. BUS SWITCH devices perform the function of connecting or isolating two ports without providing any inherent current sink or source capability. Thus they generate little or no noise of their own while providing a low resistance path for an external driver. These devices connect input and output ports through an n-channel FET. When ther gate-to-source junction of this FET is adequately forward-biased the device conducts and the resistance between input and output ports is small. Without adequate bias on the gate-to-source junction of the FET, the FET is turned off, therefore with no VCC applied, the device has hot insertion capability.

FEATURES:
BUS SWITCHes provide zero delay paths
• Extended commercial range of –40°C to +85°C
• Low SWITCH on-resistance: FST163xxx – 4Ω
• TTL-compatible input and output levels
• ESD > 2000V per MIL-STD-883, Method 3015; > 200V using machine model (C = 200pF, R = 0)
• Available in SSOP, TSSOP and TVSOP

View
Part Name(s) : CBTS16212 CYS212 SN74CBTS16212 SN74CBTS16212DGG SN74CBTS16212DGV SN74CBTS16212DGVR SN74CBTS16212DLR 74CBTS16212DGGRE4 74CBTS16212DGGRG4 SN74CBTS16212DGGR SN74CBTS16212DL SN74CBTS16212DLG4 Texas-Instruments
Texas Instruments
Description : 24-BIT FET BUS-EXCHANGE SWITCH WITH SCHOTTKY DIODE CLAMPING

description
The SN74CBTS16212 provides 24 bits of high-speed TTL-compatible BUS SWITCHing or exchanging with Schottky diodes on the I/Os to clamp undershoot. The low on-state resistance of the SWITCH allows connections to be made with minimal propagation delay.

● Member of the Texas Instruments WideBUS™ Family
● 5-Ω SWITCH Connection Between Two Ports
● TTL-Compatible Input Levels
● Latch-Up Performance Exceeds 250 mA Per JESD 17
● ESD Protection Exceeds JESD 22
    – 2000-V Human-Body Model (A114-A)
    – 200-V Machine Model (A115-A)

View
Part Name(s) : 74CBTS16212DGGRE4 74CBTS16212DGGRG4 74CBTS16212DGVRE4 74CBTS16212DGVRG4 74CBTS16212DLRG4 CBTS16212 CYS212 SN74CBTS16212DGGR SN74CBTS16212DGVR SN74CBTS16212DLG4 SN74CBTS16212DLR SN74CBTS16212DGG SN74CBTS16212DGV SN74CBTS16212DL SN74CBTS16212 TI
Texas Instruments
Description : 24-BIT FET BUS-EXCHANGE SWITCH WITH SCHOTTKY DIODE CLAMPING

description
The SN74CBTS16212 provides 24 bits of high-speed TTL-compatible BUS SWITCHing or exchanging with Schottky diodes on the I/Os to clamp undershoot. The low on-state resistance of the SWITCH allows connections to be made with minimal propagation delay.

● Member of the Texas Instruments WideBUS™ Family
● 5-Ω SWITCH Connection Between Two Ports
● TTL-Compatible Input Levels
● Latch-Up Performance Exceeds 250 mA Per JESD 17
● ESD Protection Exceeds JESD 22
    – 2000-V Human-Body Model (A114-A)
    – 200-V Machine Model (A115-A)

View
Part Name(s) : IDT74CBTLV16211PV IDT74CBTLV16211PA IDT74CBTLV16211PF IDT74CBTLV16211 IDT
Integrated Device Technology
Description : LOW-VOLTAGE 24-BIT BUS SWITCH

DESCRIPTION:
The CBTLV16211 operates as a single 24-BIT BUS SWITCH or as a dual 12-bit BUS SWITCH, which provides high speed SWITCHing. This device has very low ON resistance, resulting in under 250ps propagation delay throughout the SWITCH.

FEATURES:
• 5Ω A/B bi-directional SWITCH
• Isolation Under Power-Off Conditions
• Over-voltage tolerant
• Latch-up performance exceeds 100mA
• VCC = 2.3V - 3.6V, normal range
• ESD >2000V per MIL-STD-883, Method 3015; >200V using machine model (C = 200pF, R = 0)
• Available in SSOP, TSSOP, and TVSOP packages

APPLICATIONS:
• 3.3V High Speed BUS SWITCHing and BUS Isolation

View

1

2345678910 Next

 

All Rights Reserved © datasheetbank.com 2014 - 2019 [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]